• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.751-753
• /
• 2005

In this raper, Economic value of reserve margin i.i presented by opportunity cost for Korean power system, and the level of compensation for spinning reserve that is necessary to operate power system stably is proposed. The generator that is giving up for opportunity to participate in energy market must take opportunity cost. it is relative to not only whole demand level but also marginal cost of each resource. In this paper, assume that all resource in Korea is equivalent to six generator for simulation. and we evaluate value of reserve in the time of high demand and low demand. Also we propose the way to improve a evaluation method by examine relationship between capacity payment and value of reserve.

• IE interfaces
• /
• v.14 no.2
• /
• pp.205-209
• /
• 2001

The number of tunnel has fast increased with the rapid expansion of highway network. Tunnel should be designed to provide for drivers both safety and pleasant driving conditions. In this perspective, the design for tunnel lightning is very important in order to provide its safety, pleasantness, and cost-efficienty of maintenance, all of which should be considered and analyzed for a better tunnel lighting. This paper attempts to compare the low-pressure sodium lamp, which has usually been used for tunnel lighting, with the fluorescent lamp, which we consider as an alternative for the former. In an effort to determine the number of lamps to meet the required illuminance in the tunnel, this research employs a simulation technique which would allow us to conjecture, with the aid of basic model, the life cycle cost for illumination per each tunnel. This analysis is expected to provide a basic method and related information for tunnel development and design.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.317-320
• /
• 2000

This paper proposes a voltage compensation method to improve the control performance of B4 inverter which is studied for low-cost drive systems. The B4 inverter employs only four switches and it has a center-tapped connection in the split dc-link capacitors to one phase of a three-phase motor. In the B4 topology unbalan-cd three-phase voltages will be generated by the dc link voltage ripple. To solve this problem we present a voltage compensation method which adjusts switching times considering dc link voltage ripple. The proposed method is verified by simulation results,

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.128-130
• /
• 1998

A simplified control method for the single-phase active power f1Iter is proposed. This method has the advantages of using only one current sensor, a simple control circuit and low implementation cost. A model of this method is derived. A prototype is also developed to demonstrate the performance of this method. The test results show that the proposed active power filter has the expected performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.65-73
• /
• 2007

This paper introduces design-for-test (DFT) techniques for low-cost system-on-chip (SoC) test. We present a Scan-Test method that controls IEEE 1500 wrapper thorough IEEE 1149.1 SoC TAP (Test Access Port) and design an at-speed test clock generator for delay fault test. Test cost can be reduced by using small number of test interface pins and on-chip test clock generator because we can use low-price automated test equipments (ATE). Experimental results evaluate the efficiency of the proposed method and show that the delay fault test of different cores running at different clocks test can be simultaneously achieved.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.4
• /
• pp.172-177
• /
• 2008

In this paper, we design an authentication protocol based on Fuzzy Signature Vault Scheme using a light signature feature extraction method for user convenience and efficiency of electronic commerce. The signature is used broadly in electronic commerce because it is one of the simple and low-cost biometric items. However, signature has a problem that there are few low-cost and safe protocols. To solve this problem, we design a feature extraction method which is adequate for characters of signature and Fuzzy Vault Scheme. In addition, we design and analyze an efficient authentication protocol with some parameters used in this procedure. The followings are advantages when this protocol is applied to authentication procedure; 1) using convenient and low-cost signatures, 2) being possible to verify users with spending only about second for signature processing and authentication, 3) one time on transmission for sign-in and verification and 4) getting user authentication with secret value at the same time.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.39-44
• /
• 2022

This paper presents LiDAR static obstacle map based vehicle position correction algorithm for urban autonomous driving. Real Time Kinematic (RTK) GPS is commonly used in highway automated vehicle systems. For urban automated vehicle systems, RTK GPS have some trouble in shaded area. Therefore, this paper represents a method to estimate the position of the host vehicle using AVM camera, front camera, LiDAR and low-cost GPS based on Extended Kalman Filter (EKF). Static obstacle map (STOM) is constructed only with static object based on Bayesian rule. To run the algorithm, HD map and Static obstacle reference map (STORM) must be prepared in advance. STORM is constructed by accumulating and voxelizing the static obstacle map (STOM). The algorithm consists of three main process. The first process is to acquire sensor data from low-cost GPS, AVM camera, front camera, and LiDAR. Second, low-cost GPS data is used to define initial point. Third, AVM camera, front camera, LiDAR point cloud matching to HD map and STORM is conducted using Normal Distribution Transformation (NDT) method. Third, position of the host vehicle position is corrected based on the Extended Kalman Filter (EKF).The proposed algorithm is implemented in the Linux Robot Operating System (ROS) environment and showed better performance than only lane-detection algorithm. It is expected to be more robust and accurate than raw lidar point cloud matching algorithm in autonomous driving.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.95-103
• /
• 2022

In this paper, the efficiency of a sensorless method with square-wave injection for a low-cost inverter, so called B4 inverter is presented. This inverter comprises only 4 switches to reduce system cost. It is distinguished from the conventional B6 inverter that has 6 of switching elements. The B4 inverter, injected a 1 kHz of harmonic wave, has been modelled using the functions and library in Matlab/Simulink. This paper described each component of sensorless algorithm. Among them, the Notch Filter is used to extract the harmonic component of the phase current and a second-order low-pass filter was used to reduce the ripple of the estimated speed. It is shown through simulation that the rotor angle of a permanent magnet synchronous motor is detected by multiplying the current waveform extracted using the notch filter by the harmonic voltage. The feasibility of the proposed method is shown through Simulink simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.226-232
• /
• 2002

In tradition, there have been two kinds of drying methods, which are sun drying and artificial drying. The sun drying method which has been adopted traditionally has been replaced by the hot-air drying method which is one of the most general methods of artificial drying, with its simple drying system, low initial cost of drying plant, and easy operating method. But the hot-air drying method has some defects ; (1)much energy loss happens due to the discharge of hot air during the drying process, (2)control of drying rate is not easy on account of changing relative humidity of inlet air for uniform hot air temperature, (3)high temperature of floods in drying process brings about the production of low-grade drying products. Also, the hot-air drying method is inducing environmental and sanitary problems which are resulting from the emission of high temperature and high humidity air, including stick on the drying progress. Vacuum drying technique, whose drying time and 7uantity of exhausting energy is about 1/3 ~1/4 of hot air drying, is very excellent in the drying efficiency. As the results, it took about 20 hours for material to reach about 18% of the final moisture content in order to store products for a long time, from about 470% of the early moisture content at the beginning of drying, and maximum drying rate comes to about $0.35 kg/m^2hr$ at about 350% of the moisture content.

• Journal of Korean Academy of Nursing
• /
• v.36 no.3
• /
• pp.503-513
• /
• 2006

Purpose: This study focused on analysing costs per home health care nursing visit based on home health care nursing activities in medical institutes. Method: The data was collected in three stages. First, the cost elements of home health care nursing services were collected and 31 home care nurses participated. Second, the workload and caseload of home care nursing activities were measured by the Easley-Storfjell Instrument(1997). Third, the opinions on improving the home health care nursing reimbursement system were collected by a nation-wide mailing survey from a total of 125 home care agencies. Result: The cost of home health care nursing per visit was calculated as 50,626\. This was composed of a basic visiting fee of $35,090{\\}({\fallingdotseq}355$)$ and travel fee of $15,536{\\}({\fallingdotseq}15$)$. The major problems of the home care nursing payment system were the low level of the cost per visit, no distinction between first visit and revisits, and the limitations in health insurance coverage for home health care nursing services. Conclusion: This study's results will contribute as a baseline for establishing policies for improvement of the home health care nursing cost and for applying a community-based visiting nursing service cost.