• 대한기계학회논문집A
• /
• 제37권1호
• /
• pp.39-46
• /
• 2013

본 논문의 목적은 사출압축성형을 적용하여 13 메가 픽셀을 갖는 휴대폰 카메라용 플라스틱 비구면 렌즈를 개발하는데 있다. 사출압축성형 실험을 위하여 이동 가능한 상부 형판과 4 개의 스프링을 사용하여 금형이 제작되었다. 두께비 2를 갖는 비구면 렌즈를 대상으로 캐비티 충전 실험을 수행한 결과, 일반 사출성형에서는 웰드라인이 발생하였으나, 0.3mm의 압축스트로크가 적용된 사출압축성형에서는 웰드라인이 발생하지 않았다. 또한 미성형 실험을 통하여 얻은 충전패턴은 해석결과와 잘 일치하였다. 복굴절은 압축스트로크가 증가함에 따라 감소하였으며, 사출압축성형에서 발생한 복굴절은 일반 사출성형에 의한 값에 비하여 매우 낮고 균일한 분포를 나타냈다. 그리고 4 장의 플라스틱 렌즈로 구성된 조립체의 평균 복굴절은 장착되는 렌즈의 방향에 의하여 크게 영향을 받았다.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.479-482
• /
• 2004

We report a method for simultaneous measurements of cell gap, twist angle, birefringence dispersion of liquid crystal (LC) material and alignment directions in filled reflective LC cells. The method is based on spectral measurements of the LC cell reflectivity for three orientations ($0^{\circ},45^{\circ},90^{\circ}$) of the exit polarizer and may be applied for LC cells with low and high gaps.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.202-204
• /
• 2004

We study theoretically optical properties of thin layered stacked monochrome cholesteric liquid-crystal displays. Thin thickness of the layers (${\sim}1{\mu}m$) allows us appreciably to reduce driving voltage and use such displays in smart cards. Good selective reflection is achieved due to stacked structure. Dependence of the reflectivity of this type of displays on the quantity of the layers, their thickness, and liquid crystal birefringence is investigated.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.117-123
• /
• 2015

Cholesteric liquid crystals are one dimensional photonic band-gap materials due to their birefringence and periodic structure. Dye doped cholesteric liquid crystals are self-assembling, mirror-less, low threshold laser structures that exhibit distributed feedback. In this review paper, we have presented the development in the field of lasing characteristics of dye doped cholesteric liquid crystals.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.165-171
• /
• 2000

Fluorinated polyimides with high thermal stability, low optical absorption loss in the optical communication wavelengths of 1.3 and 1.55㎛, and low birefringence and water absorption have been investigated for optical waveguide applications. These polyimides were prepared from 2,2-bis(3,4-dicar-boxyphenyl) hexafluoropropane dianhydride (6FDA) with 1,4-bis-(4-amino-2-trifluoromethyl-phenoxy) tetrafluorobenzene (ATPT) , 1,4-bis-(4-amino-2-trifluoromethyl-phenoxy) benzene (ATPB) , and 1,3-bis-(4-amino-2-trifluoromethyl-phenoxy ) 4,6-dichlorobenzene (ATPD ), respectively. The polyimides obtained had glass transition temperatures that ranged from 260 to 280$\^{C}$, and low water absorption less than 0.4% and low optical loss (> 0.2 dB/cm) at 1.3 and 1.55㎛. Birefringency values of polymer films ranged from 0.0041 to 0.0066.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.228-229
• /
• 2003

The quasi-phase matching (QPM) technique has dramatically changed the guidelines in developing nonlinear optical materials, which doesn't require birefringence and off-diagonal components for efficient wavelength conversion. Minimum requirement for QPM is the modulation of nonlinearity and ferroelectric materials with low coercive field has become fascinating in periodical poling. Stoichiometric lithium tantalate (SLT) has attractive advantages of low coercive field (∼l .5 KV/mm), high nonlinearity, high optical damage resistance and low thermo-optic coefficients, leading to a large aperture QPM devices for high power operation. (omitted)

• 대한전자공학회논문지SD
• /
• 제41권6호
• /
• pp.33-41
• /
• 2004

본 논문에서는, 편광측정법에 의한 광섬유 전류 센서(P-FOCS)를 실험·제작하여, 실제 필드에 적용할 수 있는 P-FOCS의 상용화 가능성에 대하여 연구하였다. P-FOCS는 인가된 전류에 의해 발생한 자기장에 비례하는 Faraday 회전각을 측정함으로서 인가된 전류를 측정한다. P-FOCS의 센싱 광섬유로는 저복굴절 광섬유를 사용하여 밴딩에 의한 선복굴절의 영향을 최소화하였으며, 벌크(bulk)한 광학소자의 사용으로 인한 광 손실을 막기 위해 전 광섬유 소자를 사용하였다. 또한, 구성된 신호처리회로는 광섬유 소자들의 연결부에서의 손실로 인한 출력 신호의 강도 변화를 제거하기 위해 사용된다. Faraday 회전각은, 632.8nm 파장의 광원을 이용하여 권선수가 약 1500인 솔레노이드에 전류를 인가해 7500A의 전류원의 효과를 얻도록 하여, 솔레노이드 내부에 센싱 광섬유를 통과시켜 측정하였다. $1000A{\sim}7500A$ 범위에서, 선형성의 측정 오차는 약 1.5% 이내였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.206-209
• /
• 2004

We investigated response characteristics of liquid crystal display(LCD) with different operating mode of nematic liquid crystals (NLCs) such as $45^{\circ}$twist nematic (TN), $67.3^{\circ}$TN and ECB(electrical controlled birefringence) on a rubbed polyimide (PI) surface. The three kinds of LCD operating mode obtain stable EO performance. Low transmittances of the $45^{\circ}$TN and $67.3^{\circ}$TN cell on the rubbed PI surface were achieved by using low cell gap d. The fast response time of ECB cell among the three kinds of LCD operating mode was measured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1970-1972
• /
• 2003

In this paper, a fiber optic current sensor(FOCS) is implemented by low birefringence fiber, and the characteristics of FOCS is investigated. Using the Faraday rotation, the electric current is measured. The measured error is calculated within 1.5% ranging from 1000 to 7500A.