• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.382-387
• /
• 2010

This paper presents a novel design method for determining the PID gains of a speed controller for a servo system compensating variations in bandwidth at a low speed. The variations in bandwidth of a speed controller are measured at a low speed and the relationship between the bandwidth and the damping ratio are verified by determining the location of the closed loop pole. The proposed algorithm uses the z-transform of a plant and speed controller and applies the time-varying sampling method for determining the PID gains of the speed controller at low speed. The magnitude and the phase condition are considered for finding a suitable control gain. The usefulness and effectiveness of the proposed method is demonstrated through experimental results such as low speed control and robust disturbance responses.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.217-218
• /
• 2006

We propose a method for improving the performance of the Amplitude Shift Keying (ASK) system using a fuzzy logic system for automatically tuning the bandwidth of low pass filter. Instead of a fixed bandwidth of a low pass filter of receiver, the fuzzy logic system is used to automatically adjust the bandwidth. The inputs to the fuzzy logic system are the error and change of error, and output is a bandwidth. Simulation results showed that the proposed system improves considerably on the performance of the fixed bandwidth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.521-524
• /
• 2005

We propose a method for improving the performance of BASK system using the automatic band width control of low pass filter of receive. Instead of a fixed bandwidth, proposed method is used to the fuzzy logic system. The inputs of fuzzy logic system are remainder and integral of remainder, and the output is bandwidth of low pass filter. The efficacy of the proposed method is verified by means of simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.462-466
• /
• 2007

This paper proposes an automatic bandwidth control method for the performance improvement of Binary Amplitude Shift Keying (BASK) system for Giga-Bit Modem in millimeter band. In order to improve the performance of the BASK system with a fixed bandwidth, the proposed method is to adjust a bandwidth of low pass filter in receiver using the fuzzy system. The BASK system consists of a high speed shutter of the transmitter and a counter and a repeater of receiver. The repeater consists of four stage converters, and a converter is constructed with a low pass filter and a limiter. The inputs to the fuzzy system are the reminder and integral of remainder of counter, and output is a bandwidth. We used a Viterbi algorithm to find the optimum detection from the output of the counter. Simulation results showed that the proposed system improves the performance compared to the fixed bandwidth.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.18-22
• /
• 2005

This paper presents the analog adaptive phase-locked loop (PLL) architecture with a new adaptive bandwidth controller to reduce locking time and minimize jitter in PLL output for wireless communication. It adaptively controls the loop bandwidth according to the locking status. When the phase error is large, the PLL increases the loop bandwidth and reduces locking time. When the phase error is small, the PLL decreases the loop bandwidth and minimizes output jitters. The adaptive bandwidth control is implemented by controlling charge pump current depending on the locking status. A 1.28-GHz CMOS phase-locked loop with adaptive bandwidth control is designed with 0.35 $mu$m CMOS technology. It is simulated by HSPICE and achieves the primary reference sidebands at the output of the VCO are approximately -80dBc.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.303-309
• /
• 2016

This paper presents a channel-adaptive rate control algorithm for low delay video coding. The main goal of the proposed method is to adaptively use the unknown available channel bandwidth while reducing the end-to-end delay between encoder and decoder. The key idea of the proposed algorithm is for the status of the encoder buffer to indirectly reflect the mismatch between the available channel bandwidth and the generated bitrate. Hence, the proposed method fully utilizes the unknown available channel bandwidth by monitoring the encoder buffer status. Simulation results show that although the target bitrate mismatches the available channel bandwidth, the encoder efficiently adapts the given available bandwidth to improve the peak signal-to-noise ratio.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1760-1770
• /
• 2018

This paper presents a control bandwidth extension method for inverters with a low carrier ratio. The bandwidth is extended at the price of decreasing the phase margin. Then the phase margin is compensated by introducing an extra leading angle into an inverse Park transformation. The model of the controller with the proposed method is established. The magnitude and phase characteristics are also analyzed. Then the influence on system stability when the leading angle is introduced is analyzed. The proposed method is applied to design an inverter controller with both a large bandwidth and a desired phase margin, and the experimental results verify that the controller performs well in the steady-state and in terms of transient response.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.33-34
• /
• 2016

This paper presents a load sharing method based on the low bandwidth communication (LBC) applied to a DC microgrid in order to balance the state of charge (SOC) of the battery units connected in parallel to the common bus. In this method, SOC of each battery unit is transferred to each other through LBC to calculate average SOC value. After that, droop coefficients of battery units are adjusted according to the difference between SOC of each unit and average SOC value of all batteries in the system. The proposed method can effectively balance the SOC of battery units in charging and discharging duration with a simple low bandwidth communication system.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.4
• /
• pp.178-184
• /
• 2005

In this paper, using diplexer structure and varactor diode controlled by reverse bias voltage for diplexer switch gives possibilities to improve isolation and current characteristics. 1 have newly designed switch with high isolation by application varactor diode corresponding to capacitor of diplexer. The low-pass filter for proposed tunable diplexer passes the microwave signal in the bandwidth for wireless cellular network systems and high-pass filter passes it in the bandwidth for wireless personal communication services (PCS) network systems. As the capacitance of the low-pass filter increases, the cut-off frequency can be moved to low frequency, so that the switch is on state in cellular bandwidth and off state in the PCS bandwidth, in contrast to, as the capacitance for attenuation characteristic of high-pass filter increases, it can be moved to high frequency, so that the switch is off state and on state in the cellular bandwidth. it is possible to improve isolation and current consumption characteristics by application diplexer design methods and varactor diode. 1 expect that the tunable diplexer circuit and design methods should be able to find applications on MMIC and low temperature copired ceramic (LTCC).

• Journal of KIISE
• /
• v.45 no.1
• /
• pp.86-93
• /
• 2018

When multiple clients share bandwidth and receive a streaming service, HTTP Adaptive Streaming has a problem in that the bandwidth is measured inaccurately due to the ON-OFF pattern of the segment request. To solve the problem caused by the ON-OFF pattern, the proposed PANDA (Probe AND Adapt) determines the quality of the segment to be requested while increasing the target bandwidth. However, since the target bandwidth is increased by a fixed amount, there is a problem in low bandwidth utilization and a slow response to changes in bandwidth. In this paper, we propose a video quality control scheme that improves the low bandwidth utilization and slow responsiveness of PANDA. The proposed scheme adjusts the amount of increase in the target bandwidth according to the bandwidth utilization after judging the bandwidth utilization by comparing the segment download time and the request interval. Experimental results show that the proposed scheme can fully utilize the bandwidth and can quickly respond to changes in bandwidth.