• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.1-11
• /
• 2016

The purpose of this study was to provide resources for medical exposure reduction through evaluation of organ dose and image resolution for lumbar spine around according to the size of the collimator in DR system. The size of the collimator were varied from $8^{\prime\prime}{\times}17^{\prime\prime}$ to $14^{\prime\prime}{\times}17^{\prime\prime}$ by 1" in AP and lateral projection for the lumbar spine radiography with RANDO phantom. The organ dose measured for liver, stomach, pancreas, kidney and gonad by the glass dosimeter. The image resolution was analyzed using the Image J program. The organ dose of around lumbar spine were reduced as the size of the collimator is decreased in AP projection. There were no significant changes decreasing rate whenever the size of the collimator were reduced 1" in the gonad. The organ dose showed higher on liver and kidney near the surface in lateral projection. There were decreasing rate of less than 5% in liver and kidney, but decreasing rate was 24.34% in the gonad whenever the size of the collimator were reduced 1". Organ dose difference for internal and external of collimator measured $549.8{\mu}Gy$ in the liver and $264.6{\mu}Gy$ in the stomach. There were no significant changes organ dose difference that measured $1,135.1{\mu}Gy$ in the gonad. Image Quality made no difference because SNR and PSNR were over than 30 dB when the collimator size is less than $9^{\prime\prime}{\times}17^{\prime\prime}$ on AP projection and $10^{\prime\prime}{\times}17^{\prime\prime}$ on lateral projection. Therefore, we are considered that the recommendations criterion for control of collimator were suggested in order to reduce unnecessary X-ray exposure and to obtain good image quality because lumbar spine radiography contains a lot of peripheral organs rather than other area radiography.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.3-11
• /
• 2015

Purpose It is hard to obtain high quality images of knee and T.M joint because of a lot of soft tissues in the knee and T.M joint area. Most conventional system for high resolution scintigraphy was used by 4 mm aperture pinhole collimator. Performance comparison of high-resolution pinhole SPECT for Micro deluxe phantom using conventional system. the aim of this study is to evaluate performance of each aperture according to the diameter size and the usefulness of 24-hour delayed bone scintigraphy. Materials and Methods In this study 6 mm, 8 mm diameter pinhole collimators were mounted on Siemens E.CAM systems. In order to evaluate performance evaluation of each aperture and Micro Deluxe phantom was used for performance comparison of conventional SPECT system, Projection data were obtained with 9 degree increment per 30 second. Transverse images were reconstructed using dedicated OSEM algorithm with recovery of detector blurring. $^{99m}Tc-HDP$ source was used for 24-hour delayed bone scintigraphy. Results The knee joint images obtained with 24-hour delay were improved more than those obtained with 3-hour delay in our study. The 6 mm and 8 mm pinhole collimators FWHM have improved by 28% SNR and Uniformity have improved by 35%, Contrast has improved by 7% in 24-hour delayed knee joint image. While in 24-hour delayed T.M joint image of the 6 mm and 8 mm pinhole collimators FWHM have decreased by 60% SNR has decreased by 20% and Uniformity has decreased by 25%, Contrast has decreased significantly. Conclusion Pinhole collimators with 6 mm and 8 mm diameter could offer a superior performance for 24-hour delayed bone scintigraphy. The use of 24-hour delayed image provides additional benefits for pinhole scintigraphy of knee joint. Therefore, we expect that it is useful for precise diagnosis of knee joint and it is applicable to others joint imaging.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.81-88
• /
• 2016

This study was conducted to find out the effects of Improvement of Botanical Composition Technology (IBCT) on the forage production and ecological characteristics in a Rumex acetosella-dominated hilly pasture in Pyeongchang, in a period from August 2013 to the end of growing season in October 2015. $2MT\;ha^{-1}$ limestone was applied in August 2013 and April 2014. Liming significantly increased soil pH from 4.69 to 5.47 and then the soil pH consistently hovered at 4.91~4.98. For every grazing time, plant height was found to be higher with the application of IBCT as compared with the control. After grazing, no significant difference in plant height was found between the IBCT group and the control. Changes in the botanical composition of grassland can be affected by a lot of circumstances, but application of IBCT decreased Rumex acetosella from 12% to 2%, while also increasing the proportion of pasture. In relation to the botanical composition of grass, orchardgrass and timothy showed the highest percentages throughout the whole study period. The proportion of Kentucky bluegrass increased over time while tall fescue steadily decreased. The totals for grazing days were 58 in 2014 and 55 in 2015. Average herbage dry matter intake was $7,848kg\;ha^{-1}$ in 2014 and $6,941kg\;ha^{-1}$ in 2015. Due to the application of IBCT, dry matter productivity showed a significant increase of 59% during the first grazing period in 2014 (3,437 kg ha and 5,460 kg ha in control and IBCT). In 2015, the total dry matter yield of the IBCT group was 51% greater than the control ($5,742kg\;ha^{-1}$ and $8,685kg\;ha^{-1}$ in control and IBCT). Under acidic soil conditions, red sorrel can grow more strongly than grasses because it has better tolerance in dry and acidic conditions. Therefore, constant management is required in order to keep red sorrel from dominating the hilly pasture. In this study, the application of IBCT was able to effectively control weeds at all points. As a result, total management, including improvement of soil, overseeding, and application of selective herbicide and fertilizer, is needed to maintain excellent grassland conditions due to the limiting effects of environmental factors on grassland productivity.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.874-882
• /
• 2017

As the interest on the air-pollution is gradually rising up at home and abroad, automotiv e and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward three main issues : evaporative, performance, air pollution. In addition, researcher studied the environment problems of the bio-ethanol, bio-butanol, bio-ETBE (Ethyl Tertiary Butyl Ether), MTBE (Methyl Tert iary Butyl Ether) fuel contained in the fuel as octane number improver. The researchers have many dat a about the health effects of ingestion of octane number improver. However, the data support the con clusion that octane number improver is a potential human carcinogen at high doses. Based on the bio-fuel and octane number improver types (bio-ethanol, bio-butanol, bio-ETBE, MTBE), this paper dis cussed the influence of gasoline fuel properties on the evaporative emission characteristics. Also, this p aper assessed the acceleration and power performance of gasoline vehicle for the bio-fuel property. As a result of the experiment, it was found that all the test fuels meet the domestic exhaust gas standards, and as a result of measurement of the vapor pressure of the test fuels, the bio - ethanol : 15 kPa and the biobutanol : 1.6 kPa. thus when manufacturing E3 fuel, Increasing the biobutanol content reduces evaporation gas and vapor pressure. In addition, Similar accelerating and powering performance was shown for the type of biofuel and when bio-butanol and bio-ethanol were compared accelerated perf ormance was improved by about 3.9% and vehicle power by 0.8%.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.453-462
• /
• 2021

A lot of license plate data is required for car number recognition. License plate data needs to be balanced from past license plates to the latest license plates. However, it is difficult to obtain data from the actual past license plate to the latest ones. In order to solve this problem, a license plate recognition study through deep learning is being conducted by creating a synthetic license plates. Since the synthetic data have differences from real data, and various data augmentation techniques are used to solve these problems. Existing data augmentation simply used methods such as brightness, rotation, affine transformation, blur, and noise. In this paper, we apply a style transformation method that transforms synthetic data into real-world data styles with data augmentation methods. In addition, real license plate data are noisy when it is captured from a distance and under the dark environment. If we simply recognize characters with input data, chances of misrecognition are high. To improve character recognition, in this paper, we applied the DeblurGANv2 method as a quality improvement method for character recognition, increasing the accuracy of license plate recognition. The method of deep learning for license plate detection and license plate number recognition used YOLO-V5. To determine the performance of the synthetic license plate data, we construct a test set by collecting our own secured license plates. License plate detection without style conversion recorded 0.614 mAP. As a result of applying the style transformation, we confirm that the license plate detection performance was improved by recording 0.679mAP. In addition, the successul detection rate without image enhancement was 0.872, and the detection rate was 0.915 after image enhancement, confirming that the performance improved.

• The Korean Journal of Archival Studies
• /
• no.13
• /
• pp.91-134
• /
• 2006

In general, personally collected archives, manuscripts, are physically badly conditioned and also contextual of the archives and information on the history of production is mostly collected partly in the manuscripts. Therefore they need to control the name of the producers on the archives collected in various ways effectively and accumulate provenance information which is the key element when understanding the production background in the collecting repository. Here, the authority control and provenance information management must be organized from the beginning of acquisition and this means to collect necessary information considering control process of acquisition as well. This thesis is for verifying the necessity of the authority control in collecting repository and accumulation of the provenance information and for suggesting the things to be considered as collecting Archival authority system. For all these, this thesis shows that it has checked out the necessity of the authority control in archival management and archival authority control and researched the standard of archival authority control, work process and accumulation process. Archival provenance information management and authority control in the archival authority control system are organized through the whole steps of the archival management starting from the lead file to the name of the producers at archival registration and archival description at acquisition. And a lot of information is registered and described at the proper point of time and finally all the information including authority control which controls the Heading in the authority management must be organized to use them as an intellectual management of archives and Finding Aids. The features of the Archival authority system are as follows; first of all, Authority file type which is necessary at the archival authority control of democracy movement is made up of the name of the group, person, affair and terminology(subject name). Second of all, basic record structures and description elements in authority collection of Korea Democracy Foundation Archives apply in the paragraph 1 of ISAAR(CPF) adding some necessary elements and details of description rule such as spacing words and using the periods apply in the paragraph 4 of KCR coping with the features of the archival management system. And also the way of input on the authority record is based on EAC(Encoded Archival Context). Third of all, it made users approach to the sources which they want more easily by connecting the authority terms systemically making it possible to connect the relative terms with up and down words, before and after words variously and concretely expanding the term relations rather than earlier traditional authority system which is usually expressed only with relative words (see also). So the authority control of archival management system can effectively collect and manage the function of various and multiple groups and information on main activities as well as its own function which is controlling the Heading and express the multiple and intermediary relationship between archives and producers or between producers and it also provides them with expanded Record information service which satisfies user's various requests through Indexing service. Finally applying in this international standard ISAAR(CPF) through the instance of the authority management like this, it can be referred to making Archival authority system in Collecting repository hereafter by reorganizing the description elements into appropriate formations and setting up the authority file type which is to be managed properly for every service.

• Clean Technology
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2021

Due to the negative impacts of microplastics (MPs) on the ecosystem, the investigation of its occurrence and its treatment from sewage and wastewater treatment plants (WWTPs) have received a lot of attention in the recent years. Most MPs are precipitated and removed with the sludge during the treatment process. Proper sludge management is immensely necessary to avoid MP exposure in the environment. However, the domestic research on this aspect is limited. This study reviews appropriate sludge management approaches to decrease environmental MP exposure. This can be achieved through investigating sludge generation and treatment, regulation laws and government policy trends with an emphasis on WWTPs. The ratio of sludge in sewage treatment plants has been observed to be highest in recycling followed by incineration and landfills. Recycling is the highest in fuel followed by construction materials and composting. For WWTPs, the highest ratio is in recycling followed by fuel and landfills, and recycling is confirmed in the following order: incineration > after composting > after solidification > earthworm breeding. Treatment approaches that can increase the exposure of MPs to the ecosystem are considered to be used in landfills and agricultural fields. However, this method is not appropriate given the insufficient capacity of domestic landfills and the sufficient supply of existing chemical and animal manure fertilizers. Instead, it would be rational in terms of environmental preservation to expand the use of fuel and energy in connection with the new and renewable energy policy, and to actively seek the use of sub-materials for construction materials. In order to secure the basic data for the effectiveness of future planning and revision of related laws, it is required to perform an in-depth investigation of the sludge supply and demand status along with the environmental and economic effects.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.436-445
• /
• 2023

Methane (CH₄) emissions from rice paddies are mainly observed using the closed chamber method or the eddy covariance method. In this study, a new observation technique combining a portable gas analyzer (Model LI-7810, LI-COR, Inc., USA) and an automatic opening/closing chamber (Model Smart Chamber, LI-COR, Inc., USA) was introduced based on the strengths and weaknesses of the existing measurement methods. A cylindrical collar was manufactured according to the maximum growth height of rice and used as an auxiliary measurement tool. All types of measured data can be monitored in real time, and CH₄ flux is also calculated simultaneously during the measurement. After the measurement is completed, all the related data can be checked using the software called 'SoilFluxPro'. The biggest advantage of the new observation technique is that time-series changes in greenhouse gas concentrations can be immediately confirmed in the field. It can also be applied to small areas with various treatment conditions, and it is simpler to use and requires less effort for installation and maintenance than the eddy covariance system. However, there are also disadvantages in that the observation system is still expensive, requires specialized knowledge to operate, and requires a lot of manpower to install multiple collars in various observation areas and travel around them to take measurements. It is expected that the new observation technique can make a significant contribution to understanding the CH₄ emission pathways from rice paddies and quantifying the emissions from those pathways.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.2
• /
• pp.171-186
• /
• 2023

CEOs who have started and managed small and medium-sized enterprises (SMEs) have a lot of concerns about the sustainability of their businesses in the fierce management field and sometimes have the intention to discontinue their businesses. In this study, the perception of the business environment of SMEs (intensity of competition, difficulty in manpower management), the competency of the corporate (employee competency, product or service competitiveness, digital or technical capability), the competency of the CEO's (management competency and health status of CEO), and the perception of business succession on the CEO's intention to discontinue business were empirically studied with SME CEOs. This study conducted a survey of SME CEOs in various industries from March 20 to April 15, 2022, and verified the research hypothesis using SPSS 24.0 with 296 samples obtained. As a result of the study, the intensity of competition, the difficulty in manpower management, and the perception of business succession had a positive (+) effect on the intention to discontinue the business. On the other hand, the employee competency, the product or service competitiveness, the corporate digital or technical competency, and the CEO's health status had a negative (-) effect on the intention to discontinue business. Meanwhile, it was observed that government regulations also have a moderating effect on the intensity of competition, the difficulty in manpower management, the business succession perception of CEO, and the intention to discontinue business. This study has academic significance in that the concept of 'discontinuing business', which was fragmentarily scattered according to various preceding studies, was systematized based on the level of ownership change and voluntariness. And that it empirically analyzed factors related to the intention to discontinue business targeting SME CEOs. In addition, that it observed for the baby-boomer CEOs in Korea the factors influencing the intention to discontinue business and that it was confirmed that considering their age, organizing the business stable and handing it over to the successor was another positive concept of business discontinuation.