• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.399-406
• /
• 2000

There are sendee_based research and receiver_based research for dynamic adaptation to network congestion which arises from multicast video conference ; the former results in bandwidth waste of receivers who use high available bandwidth on account of average loss rate in transmission rate, the latter in short of the method that divides layers of available bandwidth of receivers dynamically. In order to do so, in this paper, we established two multicast groups divided into non-congestion status and congestion status according to receiver's network state, and implemented the bandwidth management algorithm which is designed for providing receivers with profitable qualities for available bandwidth by letting them choose each group dynamically in reference to loss rate. As a result, experiments proved that bandwidth waste problem was improved by receiver's dynamic choice according to loss rate.

• Korean Journal of Organic Agriculture
• /
• v.31 no.4
• /
• pp.309-325
• /
• 2023

GMO labeling system in South Korea stipulates three labeling methods: GMO labeling, no labeling and Non-GMO labeling. Products labeled as Non-GMO are not allowed for unintentional commingling of GMO without tolerance. However, consumers vary their acceptance of Non-GMO label on the unintentionally commingled products and willingness to pay according to the mixing rate, rather than devalue the whole products as useless. Additionally, consumers do not believe that the acceptable mixing rate should be discriminated between non-labeled products, which allow up to 3% of unintentional GMO contamination, and Non-GMO labeled products. Information on unintentional GMO mixing mainly refers to the mixing rate, but the Non-GMO content remaining even after commingling is also important information. The decline in value is alleviated when consumers are exposed to positive information, such as Non-GMO content, rather than when exposed to negative information, such as the mixing rate. Loss Aversion Coefficient is relative depending on whether the information representing the loss is positive or negative. Information that a Non-GMO labeled product contains X% GMO is more sensitive than information that (100-X)% Non-GMO remains.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.63-67
• /
• 2019

In this study, the pressure loss of a fire hose reel hydrant was examined and the effects of each factor on the pressure loss were analyzed. First, in the pressure loss experiment according to the length of the reel hose, the pressure loss increased with increasing length of the reel hose; it was approximately 38.86% based on a 25 m hose. Second, the pressure loss of the reel hose per unit length was estimated to be $.13{\sim}.15kgf/cm^2$. Third, in the pressure loss experiment according to the change in the flow rate, the result was similar to the relation, flow rate - pressure loss (${\Delta}P{\sim}Q^2$), in the piping flow. These results provide basic data on the evaluation of fire pump pressure and the performance-based fire-protecting design of fire hose reel hydrants used in buildings.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.267-270
• /
• 2005

We investigate the spectral energy distributions (SEDs) of low mass-loss rate O-rich asymptotic giant branch (AGB) stars using the infrared observational data including the Infrared Space Observatory (ISO) data. Comparing the results of detailed radiative transfer model calculations with observations, we find that the dust formation temperature is much lower than 1000 K for standard dust shell models. We find that the superwind model with a density-enhanced region can be a possible alternative dust shell model for LMOA stars.

• Journal of the military operations research society of Korea
• /
• v.15 no.2
• /
• pp.160-169
• /
• 1989

This study is concerned with the loss rate calculation for evaluating the safety of aircraft series. The objective of this study is to provide the estimation method of safety for the determination of aircraft series, when the aircraft is directly purchased off-the-shelf or co-produced. Especially, in case the initial operation capabilities of alternative aircrafts are substantially different, this research proposes the modified cumulative average method which can effectively estimate the safety of aircraft.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.363-371
• /
• 2003

This study is mainly concerned with phenomenon of cavitation-erosion on the several materials and corrosive liquids which were applied with vibrator(suggested by ASTM G 32, 20KHz, 50$mu extrm{m}$). The maximum erosion rate by cavitation erosion in both of distilled water and sea water appeared to be proportioned to their hardness and tensile strength. Cavitation weight loss and rate of cast iron in sea water condition were greater(approximately 3 times) than that in distilled water condition, however in case of stainless steel and brass the cavitation weight loss of composite materials were not so different in both of their conditions. Cavitation weight loss of composite materials were shown as below on this test, Duratough DL : Weight loss in sea-water condition were greater (approximately 2.3 times) than it's distilled water condition. The main tendency of cavitation erosion for metals appeared that small damaged holes causing by cavitation erosion was observed with radial pattern. On the other hand, the tendency for composites appeared that small damaged holes were observed randomly.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.227-233
• /
• 1999

This study is mainly concerned with phenomenon of cavitation-erosion on the several materials and corrosive liquids which were applied with vibrator (suggested by ASTM G-32, 20KHZ, 24{$mu}m$).The main results obtained are summarized as follows ; (1) The maximum erosion rate by cavitation erosion in both of fresh-water and sea-water appeared to be proportioned to their hardness and tensile strength. (2) Cavitation weight loss and rate of cast iron in sea-water condition were greater (approximately 3 times) than that in distilled-water condition, however in case of stainless and brass the cavitation weight loss and their rates were not so different in both of their conditions. (3) Cavitation weight loss of composite materials were shown as below on this test, DuraTough DL : Weight loss in sea-water condition were greater (approximately 2.3 times) than it's fresh-water condition. (4) As the result of observation with digital camea of specimens, the main tendency of cavitation erosion for metals, was that small damaged holes causing by cavitation e개sion was appeared with radial pattern, and composites materials was that small damaged holes were appeared randomly.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.1-10
• /
• 2008

In this paper, a packet scheduling algorithm, called the modified PLFS, is proposed for real-time traffic in IEEE 802.22 WRAN systems. The modified PLFS(Packet Loss Fair Scheduling) algorithm utilizes not only the delay of the Head of Line(HOL) packets in buffer of each user but also the amount of expected loss packets in the next-next frame when a service will not be given in the next frame. The performances of the modified PLFS are compared with those of PLFS and M-LWDF in terms of the average packet loss rate and throughput. The simulation results show that the proposed scheduling algorithm performs much better than the PLFS and M-LWDF algorithms.

• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.279-289
• /
• 2009

As the TCP is the protocol designed for the wired network that packet loss probability is very low, because TCP transmitter takes it for granted that the packet loss by the wireless network characteristics is occurred by the network congestion and lowers the transmitter's transmission rate, the performance is degraded. In this article, we suggest the newly improved algorithm using two parameters, the local retransmission time value and the local retransmission critical value to the BS based on the Snoop. This technique adjusts the base stations local retransmission timer effectively according to the wireless link status to recover the wireless packet loss rapidly. We checked that as a result of the suggested algorithm through various simulations, A-Snoop protocol improve more the wireless TCP transmission rate by recovering the packet loss effectively in the wireless link that the continuous packet loss occur than the Snoop protocol.