• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.4
• /
• pp.418-428
• /
• 2017

In offshore area, newly deposited Quaternary loose seabed soils are widely distributed. There are a great number of offshore structures has been built on them in the past, or will be built on them in the future due to the fact that there would be no very dense seabed soil foundation could be chosen at planed sites sometimes. However, loosely deposited seabed foundation would bring great risk to the service ability of offshore structures after construction. Currently, the understanding on wave-induced liquefaction mechanism in loose seabed foundation has been greatly improved; however, the recognition on the consolidation characteristics and settlement estimation of loose seabed foundation under offshore structures is still limited. In this study, taking a semi-coupled numerical model FSSI-CAS 2D as the tool, the consolidation and settlement of loosely deposited sandy seabed foundation under an offshore breakwater is investigated. The advanced soil constitutive model Pastor-Zienkiewics Mark III (PZIII) is used to describe the quasi-static behavior of loose sandy seabed soil. The computational results show that PZIII model is capable of being used for settlement estimation problem of loosely deposited sandy seabed foundation. For loose sandy seabed foundation, elastic deformation is the dominant component in consolidation process. It is suggested that general elastic model is acceptable for subsidence estimation of offshore structures on loose seabed foundation; however, Young's modulus E must be dependent on the confining effective stress, rather than a constant in computation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1902-1918
• /
• 1993

Parallel architecture based on the von Neumann computation model has a limitation as a massively parallel architecture due to its inherent drawback of architectural features. The data-flow model of computation has a high programmability in software perspective and high scalability in hardware perspective. However, the practical programming and experimentaion of date-flow architectures are hardly available due to the absence of practical data-flow, we present a programming environment for performing the data-flow computation on conventional parallel machines in general, loosely compled multiprocessor system in particular. We build an emulator for tagged token data-flow architecture on the iPSC/2 hypercube, a loosely coupled multiprocessor system. The emulator is a shallow layer of software executing on an iPSC/2 system, and thus makes the iPSC/2 system work as a data-flow architecture from the programmer`s viewpoint. We implement various numerical and non-numerical algorithm in a data-flow assembler language, and then compare the performance of the program with those of the versions of conventional C language, Consequently, We verify the effectiveness of this programming environment based on the emulator in experimenting the data-flow computation on a conventional parallel machine.

• Journal of the Korea Society for Simulation
• /
• v.16 no.4
• /
• pp.33-41
• /
• 2007

Service-Oriented Architecture(SOA) define the interaction method between two computing entities that one entity performs a unit task instead of another entity. This, unit task, is called "Service" and interaction of these services should have independency and loosely coupled task. The effect of SOA's main functions such as loosely coupled task and independent interoperability with influence the possibility of flexible message communication between different way and different users. In this article, we analyzed the performance about system stabilization between general web service and SOA based application that implemented through WCF based messaging framework using .NET Framework and integrated data presentation method. As the result of test, we confirmed that SOA environment using WCF have more advantages.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.267-275
• /
• 2013

EKF has been widely used for GPS/INS integration as standard method but EKF has one well-known drawback. if the errors are not within the bounded region, the filter may be divergent. The particle filter has the advantage of the nonlinear and non-gaussian system. This paper proposes a method for compensating the GPS position errors based on the particle filter and presents loosely-coupled GPS/INS integration using proposed algorithm. We used GPS position pattern with particle filter and added attitude kalman filter for improving attitude accuracy. To verify the performance, the proposed method is compared with high cost GPS as reference. In the experimental result, we verified that the accuracy and robust were well improved by the proposed method filter effectively and robustness than by original loosely-coupled integration when vehicle turns at corner.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.131-137
• /
• 2014

Service Oriented Architecture(SOA) is a flexible structure which does not affect other services even when a specific service is changed. It provides the platform with neutral interfaces independent of any others, where services are loosely coupled in a standard way. While ESB (Enterprise Service Bus) is a key technology for service-oriented architecture, few research and development for ESB has been done. In this paper, we designed and implemented the key components of ESB such as mediation service, message oriented middleware service, operation service, monitoring service, application connection service, and database connection service. The performance evaluation was done by measuring the message processing time for the number of messages with various sizes.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.569-575
• /
• 2014

A highly efficient class E power amplifier is demonstrated for application to wireless power transfer system. The amplifier is designed with an L-type matching at the output for harmonic rejection and output matching. The power loss and the effect of each component in the amplifier with the matching circuit are analyzed with the current ratio transmitted to the output load. Inductors with a quality factor of more than 120 are used in a dc feed and the matching circuit to improve transmission efficiency. The single-ended amplifier with 20 V supply voltage shows 7.7 W output power and 90.8% power added efficiency at 6.78 MHz. The wireless power transfer (WPT) system with the amplifier shows 5.4 W transmitted power and 82.3% overall efficiency. The analysis and measurements show that high-Q inductors are required for the amplifier design to realize highly efficient WPT system.

• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.309-322
• /
• 2018

The technology of inductive power transfer has been proved to be a promising solution in many applications especially in electric vehicle (EV) charging systems, due to its features of safety and convenience. However, loosely coupled transformers lead to the system efficiency not coming up to the expectation at the present time. Therefore, at first, the magnetic core losses are calculated with a novel magnetic-circuit model instead of the commonly used finite-element-method (FEM) simulations. The parameters in the model can be obtained with a one-time FEM simulation, which makes the calculation process expeditious. When compared with traditional methods, the model proposed in the paper is much less time-consuming and relatively accurate. These merits have been verified by experimental results. Furthermore, with the proposed loss calculation model, the system is optimized by parameter sweeping, such as the operating frequency and winding turns. Specifically, rather than a predesigned switching frequency, a more efficiency-optimized frequency for the series-parallel (SP) compensation topology is detected and a detailed investigation has been presented accordingly. The optimized system is capable of an efficiency that is greater than 93% at a coil separation distance of 200mm and coil dimensions of $600mm{\times}400mm$.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.6-7
• /
• 2019

본 논문에서는 양방향 전력 전송을 가능케 해주는 Dual-active-bridge (DAB) 컨버터에서, 고주파 변압기 대신 무선 전력 전송 코일을 이용한 시스템을 제안한다. 기존의 DAB 컨버터에서 주로 사용되는 고주파 변압기는 Core-type 또는 shell-type으로 만들어지며, 1차 측 권선과 2차 측 권선이 자기적으로 강하게 결합되어 높은 전력 전달 효율을 가지도록 만든다. 이런 DAB 컨버터를 직/병렬 연결해 MV-DC to LV-DC로 변환하는 반도체 변압기 등을 구성할 때, 1차 측 권선과 2차 측 권선 사이에는 절연 문제와 1차 측 스위치 회로와 2차 측 스위치 회로, 그리고 고주파 변압기가 각각 따로 절연해야 하는 문제점이 있다. 본 논문에서 제안하는 DAB 컨버터는 1차 측과 2차 측이 수 cm 이격되어 있어 1차 측과 2차 측 사이의 자기적 결합이 굉장히 약하다. 따라서 1차 측과 2차 측 코일을 커패시터로 공진시켜 전력을 전달하는 무선전력전송(Loosely Coupled Inductive Wireless Power Transfer)을 이용한다. 무선전력전송의 공진 topology는 Parallel-Series로 선택했고, impedance transformation 회로를 추가했다.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.654-659
• /
• 2009

As web based software has developed recently, service via web has increased gradually. For this, many research organizations and reports call web is the platform of software. While web based technologies have developed, middleware of WSN and its application service has been developed from desktop based operation system. So WSN's technology reached uppermost limit of desktop application. There's difficulty in integrating, distributing and maintaining & repairing for WSN due to a tightly-coupled structure which's related closely to the hardware of sensor nod. Unlike this, web has a loosely-coupled structure and an opened system, so web service or Rich internet application (RIA) is helpful to solve the above limits. Especially, RIA is web application but can be the platform of WSN' application because it gives us various methods to communicate with user interface similar to desktop application. In this study, I suggest Message System for WSN Using RIA, expanding WSN's interconnectedness and accessibility to internet.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.785-791
• /
• 2008

Ultra-tightly coupled GPS/INS integration has been reported to show better navigation performance than that of other integration methods such as loosely coupled and tightly coupled integration. This paper uses the particle filter for ultra-tightly coupled GPS/INS integration and analyzes the navigation performance according to vehicle trajectory and the number of particles. The navigation performance of particle filter is compared with those of EKF and UKF.