• Journal of Korean Academy of Nursing
• /
• v.41 no.5
• /
• pp.613-622
• /
• 2011

Purposes: Study purpose were to describe growth patterns of premature infants in weight, length and head circumference from birth to 40th week of corrected ages (CA) and to explore factors affecting patterns. Methods: A longitudinal descriptive study was conducted with 267 premature infants. They were categorized into 2 groups; GA group with measurements at birth and the CA group with measurements at CA, which was categorized into 3 groups (group 1-3) by WHO guideline for gestational age (GA) at birth. Results: GA group presented greater measures in all than CA group at same week of life. Among CA groups, group 3 showed the highest measurements, up to 37 weeks of life, though this disappeared at 38-40 weeks. Reversely, group 1 revealed the highest growth rates in all measures, followed by group 2 and group 3. Significant interaction was observed in all measures between week of life and any type of groups. Conclusions: Higher measures in GA group, as well group 3 among CA groups, supported the superiority of intra-uterine environment overriding quality of regimen from NICU. Regardless of growth acceleration, smaller infants remain smaller, indicating that intra-uterine thrifty phenotype may continue at least up to the 40th week of CA.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.34-41
• /
• 1999

To examine the increase of paper strength by solvent-bonding using N-methylmorpholine N-oxide (NMMO), a paper was treated with aqueous solutions of NMMO, concentrated at $90^\circ{C}$ for selected periods of time, and pressed for 5 seconds followed by washing and drying. The effect of the increasing NMMO concentration on bonding state and some important properties of samples were mainly investigated. With increasing concentration of NMMO, the degree of bonding between fibers was increased, the fiber cross-sectional shape was changed from 'thin ribbonlike' to 'round rodlike' by swelling with solvent, and the longitudinal waves (crimp) were introduced to fibers, hence the shrinkage, weight per unit area, and thickness of paper were increased. Consequently, the tensile strength and elongation, under standard and wet conditions, and the stiffness were increased, and the water absorption was decreased generally with increasing concentration of NMMO. The moisture regain of treated samples was lower than that of the untreated sample, because of the reduction of space between fibers. But the moisture regain was increased a little with increasing concentration of NMMO due to the fiber swelling with NMMO followed by structural relaxation.

• Journal of Environmental Science International
• /
• v.26 no.1
• /
• pp.87-96
• /
• 2017

In the present study, we investigated the effects of artificial removal of corolla and calyx lobes from open flowers on fruit development and fruit quality of strawberry (Fragaria ${\times}$ ananassa Duch.). Removing the corolla had no significant effect on fruit weight, hardness, length, and diameter, Hunter L, a, b values, sugar content and acidity. However, removing the calyx lobes significantly inhibited longitudinal and transverse growth of the fruits, resulting in diminished fruit size. In addition, merchantable fruit quality significantly decreased upon removing the calyx lobes, and this tendency was increased as more calyx lobes were removed. Nonetheless, removal of the calyx lobes had no effects on fruit color, sugar content, or acidity, similar to the effect of corolla removal.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.406-408
• /
• 2004

A nine-month-old male Jindo with non weight-bearing on the right forelimb in flexed position, pain and edema of the elbow, and resist elbow extension was brought to the Veterinary Teaching Hospital, Chungbuk National University. Elbow radiographs showed loss of humeroradial joint space and lateral displacement of the radius and ulna. Closed reduction was reported the best therapy in most cases of luxation of the elbow but conservative reduction was impossible. Open reduction of the luxated elbow was performed and ruptured collateral ligaments were identified. Displaced elbow was required bloody surgical operation and gentle reduction to restore elbow joint. Internal reduction of choice for elbow luxation with rupture of collateral ligament in the dog was a double locking-loop suture pattern. To ensure secure grasping of parallel bundles of ligament fibers to transverse bites of each suture were placed superficial to the longitudinal bites. All ligaments were repaired with 3-metric (size 2 USP) monofilament polypropylene suture. No complications have been noted during a five-month follow up.

• Journal of Welding and Joining
• /
• v.32 no.2
• /
• pp.54-62
• /
• 2014

Manhole cover, which is usually made of grey cast iron and consists of frame and cover, should have enough strength to support the heavy traffic load. The manhole cover made of cast iron has heavy weight to handle manually and is vulnerable to impact force with its brittle characteristics. Moreover, its production process of casting has been regulated in terms of environmental pollution. In this study, steel manhole cover is proposed to substitute the cast cover with a series of structural analyses to confirm its strength to support the test load for manhole cover. The cover of the proposed steel manhole cover is made of thin circular pate and stiffeners below the plate. Rectangular columns and hollow circular plate were selected for the shape of the stiffener. In order to give enough strength for the cover to behave within elastic range in the loading, strengthening structures of the cover were varied with increasing the number and the size of the stiffeners. The results of the analyses revealed that when both the hollow circular stiffener and cross stiffeners were additionally applied at the same time to the steel cover with longitudinal stiffeners, the maximum stress level in the cover could be reduced to that level presented in the cast cover.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.33-39
• /
• 2009

Impact force to a body during walking depends on walking speed, walking steps, the condition of the floors and shoes, and weight. The ground reaction force and the foot pressure can be measured instantaneous force easily, but it's difficult to find out the amount of transferring forces to the body. On the other hand, the acceleration has an advantage for analyzing the amount of transferring forces. However, most of studies about impact forces to the ground reaction during exercise have been limited to analyze instantaneous forces. The important thing is to evaluate characters and the amount of the impact force rather than the magnitude. Therefore, this study analyze the impact force using 3 axis acceleration in three dimensions (x; anterior-posterior, y; left-right and z; longitudinal axis) using three axis acceleration. As working speed increased, impact forces increased significantly. Impact forces on x axis and z axis are higher at lower limb than that of upper limb. However, impact force at the knee is higher than that of other parts on y axis regardless of walking speed significantly. In addition, relations of the impact forces as interaction of experiment factors as well as effect of each factor are analyzed.

• Explosives and Blasting
• /
• v.20 no.2
• /
• pp.7-19
• /
• 2002

The cut is placed high up in the section, the 1st sloping holes below the cut, and divided all the holes located below the 1st sloping holes into a certain area with longitudinal section, to lower pollution made from tunnel blasting. With the sequential blasting machine, after I first blasted holes around the cut holes by a pre-splitting method, blasted the cut area and the 1st sloping holes. The 1st and 2nd sloping holes divided areas are initiated gradually to free face upwards made by the cut. Especially, I pre-splinted contour holes previous blast the before sloping holes from the contours. The ground vibration from the earth surface just over the advance face decreased about 42.0% compare with the down blasting method under the condition of equal charge weight per delay. I controlled the crack and over break of the mother rock by pre-splitting contour holes before blast the first sloping holes from the contours. The peak values of noise and air blast by blasting decreased about 10dB more than the down blasting method. the noise and air blast diminished gradually as a round. The throw distance of the fly rock was decreased about 55%.

• Journal of Veterinary Clinics
• /
• v.35 no.6
• /
• pp.302-307
• /
• 2018

This report describes the unusual ultrasonography features of chronic hypertrophic pyloric gastropathy in two dogs - a 12-year-old neutered male Pekingese (case 1) and an 11-year-old spayed female Shih Tzu (case 2) - with chronic vomiting and weight loss. Chronic hypertrophic pyloric gastropathy can be observed as the focal thickening of the pyloric wall with normal layers on ultrasonography images. However, in case 1, gastric neoplasia could not be ruled out because of the presence of regional lymph node enlargement; in case 2, an intussusception was tentatively diagnosed because of a mass within the pylorus, which appeared to be connected to the descending duodenum on the longitudinal image. In both cases, focally thickened pyloric walls were demonstrated through exploratory laparotomy, and the histopathological diagnosis of chronic hypertrophic pyloric gastropathy was made. Ultrasonography is useful for imaging the gastrointestinal tract, and the typical ultrasonographic features of chronic hypertrophic pyloric gastropathy have been reported. However, the possibility, that chronic hypertrophic pyloric gastropathy can present unusual ultrasonographic findings similar to those of tumors or intussusception, should also be considered.

• Journal of Veterinary Clinics
• /
• v.36 no.3
• /
• pp.155-158
• /
• 2019

Morphologic changes or functional impairments of the papillary muscle (PM) can influence mitral valve competence. The purpose of this study was to investigate PM size and contractile function using two-dimensional and color tissue Doppler echocardiography in normal dogs. 35 unsedated Beagle dogs without cardiovascular disease were examined. The vertical (VD) and horizontal diameter (HD) of the posterior and anterior PM was measured at end-diastole, and compared with the thickness of the left ventricular posterior wall (LVPWd). Longitudinal systolic movement of the PM was quantified as myocardial velocity and strain using tissue Doppler. The VD, HD, and ratios (VD/LVPWd, HD/LVPWd, VD/HD) were significantly greater in the posterior than anterior PM (P < 0.001). The VD and HD of posterior PM and the HD of anterior PM were significantly correlated with LVPWd (r = 0.47, 0.44, and 0.42, respectively). Body weight was significantly correlated with VD of posterior PM (r = 0.37). The peak systolic tissue velocity of the PM was $4.93{\pm}1.25cm/sec$ and peak strain was $-30.83{\pm}11.92%$. PM size and systolic function can be quantitatively assessed using two-dimensional and tissue Doppler. The establishment of these objective PM measurements may be useful to evaluate morphological and functional abnormalities of the canine PM.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.4
• /
• pp.495-504
• /
• 2021

Three-dimensional printing (3DP) applications possess substantial versatility within surgical applications, such as complex reconstructive surgeries and for the use of surgical resection guides. The capability of constructing an implant from a series of radiographic images to provide personalized anatomical fit is what makes 3D printed implants most appealing to surgeons. Our objective is to describe the process of integration of 3DP implants into the operating room for spinal surgery, summarize the outcomes of using 3DP implants in spinal surgery, and discuss the limitations and safety concerns during pre-operative consideration. 3DP allows for customized, light weight, and geometrically complex functional implants in spinal surgery in cases of decompression, tumor, and fusion. However, there are limitations such as the cost of the technology which is prohibitive to many hospitals. The novelty of this approach implies that the quantity of longitudinal studies is limited and our understanding of how the human body responds long term to these implants is still unclear. Although it has given surgeons the ability to improve outcomes, surgical strategies, and patient recovery, there is a need for prospective studies to follow the safety and efficacy of the usage of 3D printed implants in spine surgery.