• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.163-166
• /
• 2001

It leaves much room for improvement that UTM-01 is of practical use. Therefor we will design of longitudinal pole magnet for UTM-02 system. The design of new magnet is based on light weight for bogie system. The new magnet for UTM-02 was reduced weight of magnet is 18kg per one, then it was ratio lift to weight is 10.13.

• 한국조사연구학회지:조사연구
• /
• 제12권3호
• /
• pp.173-186
• /
• 2011

본 연구에서는 2003년 시작된 한국청소년패널조사 중학교 2학년 패널자료 분석을 위해 필수적인 각 연도별 횡단면, 종단면 가중치 산출방안을 소개하고 있다. 패널 모집 당시 추출된 표본이 대표하는 모집단의 종단면적 변화 분석을 위한 종단면 가중치는 로지스틱 회귀분석을 이용한 무응답 보정과 사후 층화를 통해 산출되었으며, 조사 연도의 표본 대응 모집단 분석을 위해 필수적인 횡단면 가중치는 전년도 대비 응답률과 사후 층화를 통해 산출되었다.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.95-101
• /
• 2006

Minimum weight design of laminated composite panel under combined loading was studied using linear and nonlinear deformation theories and by closed-form analysis and finite difference energy methods. Various buckling load factors are obatined for laminated composite panels with rectangular type longitudinal stiffeners and various longitudinal length to radius ratios, which are made from Carbon/Epoxy USNl25 prepreg and are simply-supported on four edges under combined loading, and then for them, minimum weight design analyses are carried out by the nonlinear search optimizer, ADS. This minimum weight design analyses are constructed with various process such as the simple design process, test simulation process and sensitivity analysis. Subseguently, the buckling mode shapes are obtained by buckling and minimum weight analyses.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.352-359
• /
• 2017

Because the Energy Efficiency Design Index(EEDI) came into effect in 2013, it is necessary to develop a new technology to overcome $CO_2$ emission regulations. In structural design viewpoint, lots of researches are carried out to develop eco-friendly and high fuel efficiency ships by weight reduction. By using the automated compartment arrangement system and automated structural design algorithm which were developed by the authors, new researches are performing to combine the above two systems. However, the effect of weight reduction was not significant because structural designs by using these systems for the midship part was carried out only focused on the minimum still water bending moment. In this paper, at first, good compartment arrangements which give the minimum still water bending moment and(or) shear force were chosen by using the automated compartment system. And then, influence of shear force on weight reduction was investigated by using the automated structural design algorithm considering longitudinal strength, local strength and shear strength of longitudinal members in cargo holds. Conclusively, it is necessary to consider the minimum still water bending moment and shear force simultaneously to reduce the weight of mid-sized bulk carrier. Also, good compartment arrangement which gives much more weight reduction compared with existing ship was proposed.

• Journal of Nutrition and Health
• /
• 제27권6호
• /
• pp.591-598
• /
• 1994

The longitudinal changes in transitional milk intakes and body weight of infants(18 boys, 10 girls) have been studied in the part of Kangwon Province from 7 days to 15 days postpartum. Milk intakes at 7, 10, 15 days postpartum were 474$\pm$155, 524$\pm$154 and 547$\pm$130g, respectively. The mean milk intakes were 515g from 7 to 15 days postpartum. Milk intakes of boys were significantly higher than those of girls. The transitional milk intakes per weight of infants appeared 147$\pm$41g/kg. The number of feed per day of boys were significantly higher than those of girls. Milk intakes per fed were 56$\pm$20g. The transitional milk intakes were affected by gestational period(p<0.05), maternal height(p<0.05) and mother's transitional milk yields (p<0.001). Infants transitional milk intakes were 82.6$\pm$17.0% of mothers transitional milk yields. Infants gained its weight 24.6, 40.1 and 39.0g/day at, 7, 10, 15 days postpartum, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권5호
• /
• pp.622-626
• /
• 2002

Growth records over six generations of 686 pigs in SD-II Swine Line were used to estimate the genetic and phenotypic covariance functions for body weight as longitudinal data. A random regression model with Legendre polynomials of age as independent variables was used to estimate the (co)variances among the regression coefficients, thus the coefficients of genetic and permanent environmental covariance functions by restricted maximum likelihood employing the average information algorithm. The results showed that, using litter effect as additional random effect, a reduced order of fit did not describe the data adequately. For all five orders of fit, however, the change trends of genetic and phenotypic (co)variances were very similar from ${\kappa}$=3 onwards.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.279-289
• /
• 2009

For a Product Oil Carrier, longitudinal bulkhead as well as transverse one is corrugated shape in general and intersection part of bulkheads is utilized for a pipe trunk. Since lower and upper stools are to be connected with all of longitudinal and transverse bulkheads, they have a uniform height respectively. The purpose of this study is the development of design system for the minimization of total weight of longitudinal and transverse bulkheads at the initial design stage. In this study, the beam element models for longitudinal and transverse corrugated bulkheads are established and they are applied to the structural analysis. For the practical design, the selection and the position of an additional pipe trunk are considered in this study. In addition the required minimum distance between the bracket installed along the web of corrugation at lower stool and the diaphragm is taken into consideration during optimization process. Evolution strategy(ES) is adopted as an optimization technique.

• Structural Engineering and Mechanics
• /
• 제43권4호
• /
• pp.459-473
• /
• 2012

Post-tensioned concrete voided slab girders are widely used in highway bridge constructions. To obtain greater section hollow rate and reduce the self-weight, the plate thickness of slab girders are designed to be small with the adoption of flat anchorage system. Since large prestress is applied to the anchor end section, it was found that longitudinal shear cracks are easy to occur along the voided slab girder. The reason is the existence of great shearing effect at the junction area between web and bottom (top) plate in the anchor end section. This paper focuses on the longitudinal anti-cracking problem at the anchor end of post-tensioned concrete voided slab girders. Two possible models for longitudinal anticracking analysis are proposed. Differential element analysis method is adopted to derive the solving formula of the critical cracking state, and then the practical analysis method for longitudinal anti-cracking is established. The influence of some factors on the longitudinal anti-cracking ability is studied. Results show that the section dimensions (thickness of bottom, web and top plate) and prestress eccentricity on web plate are the main factors that influence the anti-cracking ability. Moreover, the proposed method is applied into three engineering examples to make longitudinal anti-cracking verification for the girders. According to the verification results, the design improvements for these girders are determined.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.647-654
• /
• 2006

In orthotropic steel decks, it is likely to have defects due to fatigue damages because most of structural joints(the connection of longitudinal rib and transverse rib, the connection of deck plate and longitudinal rib) are connected by welds. However. orthotropic steel decks have many advantages. such as light weight and reduction of construction time. in comparison with concrete decks. Therefore. they are mostly used in long-span bridges and urban highway bridges. This study consists of the cause identication of fatigue damage and the suggestion of rational thickness on deck plate about the connection of deck plate and longitudinal rib. The results are as follows: fatigue damage cause at the connection of deck plate and longitudinal rib is local deformation in deck plate. And, rational thickness of deck plate is 16mm thickness.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.1-6
• /
• 1996

This study was performed to investigate the feasibility of using sonic stress-wave technique in the longitudinal direction for the assessment of incipient decay of radiata pine wood. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested nondestructively using stress-wave technique in the longitudinal direction and destructively. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, stress-wave elasticity) measured by stress-wave technique in the longitudinal direction and their percent reduction due to decay.