Browse > Article

Minimum Weight Design of Laminated Composite Panel under Combined Loading  

Lee Jong-Sun (대진대학교 컴퓨터응용기꼐설계공학과)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.15, no.1, 2006 , pp. 95-101 More about this Journal
Abstract
Minimum weight design of laminated composite panel under combined loading was studied using linear and nonlinear deformation theories and by closed-form analysis and finite difference energy methods. Various buckling load factors are obatined for laminated composite panels with rectangular type longitudinal stiffeners and various longitudinal length to radius ratios, which are made from Carbon/Epoxy USNl25 prepreg and are simply-supported on four edges under combined loading, and then for them, minimum weight design analyses are carried out by the nonlinear search optimizer, ADS. This minimum weight design analyses are constructed with various process such as the simple design process, test simulation process and sensitivity analysis. Subseguently, the buckling mode shapes are obtained by buckling and minimum weight analyses.
Keywords
Minimum Weight Design; Laminated Composite Panel; Combined Loading; Length to Radius Ratio; Membrane Prebuckling;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Simites, G. J. and Ungbhakorn, V., 1975, 'Minimum Weight Design of Stiffened Cylinders under Axial Compression,' AIAA Journal, Vol. 13, No. 6, pp. 750-755   DOI   ScienceOn
2 Simites, G. J. and Ungbhakorn, V., 1975, 'Minimum Weight Design of Stiffened Cylinders under Axial Compression with and without Lateral Pressure,' Computer & Structure, Vol. 8, pp. 19-30
3 Pappas, M. and Allentuch, A., 1975, 'Pressure Hull Optimization Using General Instability Equation Admitting More Than One Longitudinal Buckling Half-Wave,' Journal of Research, Vol. 19, pp. 18-22
4 Vanderplaats, G. N., 1973, 'CONMIN - A FORTRAN Program for Constrainted Function Minimization,' NASA TM X-62-282, version updated in March 1975, Ames Research Center, Moffett Field, CA
5 Won, C. J., Lee, J. S. and Hong, S. J., 1998, 'Optimal Design of Stiffened Laminate Composite Cylindrical Shells', Transactions of KSMTE, Vol. 7, No. 6, pp. 12-18
6 Anderson, M. S. and Stroud, W. J., 1979, 'General Panel Sizing Computer Code and Its Application to Composite Structural Panels,' AIAA Journal, Vol. 17, pp. 892-897   DOI   ScienceOn
7 Pappas, M. and Amba-Rao, C. L., 1971, 'A Direct Search Algorithm for Automated Optimum Structural Design,' AIAA Journal Vol. 9, pp. 387-393   DOI
8 Qiu, R., 1985, 'Weight Optimization of Stiffened Cylinders under Axial Compression,' Computers and Structures, Vol. 21, No. 5, pp. 945-952   DOI   ScienceOn
9 Agarwal, B. L. and Sobel, L. H., 1977, 'Weight Comparisons of Optimized Stiffened, Unstiffened, and Sandwich Cylindrical Shells,' J. Aircraft, Vol. 14, No. 10, pp. 1000-1008   DOI   ScienceOn
10 Dickson, J. N., Biggers, S. B. and Wang, T. S., 1980, 'A Preliminary Design Procedure for Composite Panels with Open-Section Stiffeners Loading in the Post-buckling Range,' In Advanture in Composite Material, Vol. 1, pp. 812-825
11 Zoutendijk, G., 1960, Method of Feasible Direction, Elsevier Publishing Co., Amsterdam
12 Bushnell, D., 1987, 'Theoretical Basis of the PANDA Computer Program for Preliminary Design of Stiffened Panel under Combined In-Plane Loads,' Computers and Structures, Vol. 27, No. 4, pp. 541-563   DOI   ScienceOn
13 Bushnell, D., 1983, 'PANDA-Interactive Program for Minimum Weight Design of Stiffened Cylindrical Panel and Shells,' Computers and Structures, Vol. 16, pp. 167-185   DOI   ScienceOn