• 상하수도학회지
• /
• 제21권5호
• /
• pp.571-579
• /
• 2007

This study was conducted to qualify the equality of the flow distribution from open channel between rapid mixing basin and flocculation basins in a domestic full-scale water treatment plant, and suggest a remedy for improving the equality. In order to evaluate the feasibility of the suggested remedy, computational fluid dynamics (CFD) technique are used, and for verifying the CFD simulation results wet tests were carried out for the pilot scale channel based on geometric similarity. From the results of CFD simulation and wet tests, it was investigated that the modification of hydraulic structure in the distribution channel, which is to install the longitudinal orifice baffle in flow direction, could improve the equality of the flow distribution. Also, in the case that Froude number is relatively small (Froude number <<0.03), the open ratio of orifices on the installed baffle hardly affects the equality of flow distribution.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.483-495
• /
• 2008

The paper presents a numerical study to evaluate the phase velocities and attenuations of the average longitudinal and shear ultrasonic waves resulting from multiple scattering in fiber-reinforced composites. A computational procedure developed in this work is first used to produce a random, yet largely even distribution of fibers. Both the viscoelastic epoxy matrix and lossless randomly distributed graphite fibers are modeled using the mass-spring-dashpot lattice model, with no damping for the latter. By numerically simulating ultrasonic through-transmission tests using this direct model of composites, phase velocities and attenuations of the longitudinal and shear waves through the composite are found as functions of frequency or fiber concentration. The numerical results are observed to generally agree with the corresponding results in the literature. Discrepancies found in some detail aspects, particularly in the attenuation results, are also addressed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.275-280
• /
• 2002

Results of a numerical simulation of a flowing of the underwater vehicles hull with the pump-jet nozzle are presented. It was calculate velocity distributions and coefficients of the lift force and the longitudinal moment of the hull with the pump-jet nozzle and isolated hull for some values of angle of attack. It was shown that the area of tile influence of the nozzle on the velocities distribution of the hull and character of changing of coefficients of the lift force and the longitudinal moment and their derivatives depending on angle of attack.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.971-980
• /
• 2003

The tree method can be extended to multivariate responses, such as repeated measure and longitudinal data, by modifying the split function so as to accommodate multiple responses. Recently, some decision trees for multiple responses have been constructed by Segal (1992) and Zhang (1998). Segal suggested a tree can analyze continuous longitudinal response using Mahalanobis distance for within node homogeneity measures and Zhang suggested a tree can analyze multiple binary responses using generalized entropy criterion which is proportional to maximum likelihood of joint distribution of multiple binary responses. In this paper, we will modify CART procedure and suggest a new tree-based method that can analyze multiple binary responses using similarity measures.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.169-174
• /
• 2001

The electron transport coefficients(the electron drift velocity, W, and the longitudinal and transverse diffusion coefficient, D$_{L}$ and D$_{T}$) in SiH$_4$-Ar mixtures containing 0.5% and 5.0% monosilane were calculated over the E/N range from 0.01 to 300 Td and over the gas pressure range 0.5, 1.0 and 1.5 Torr by the time-of-flight(TOF) method of the Boltzmann equation(BE.) and Monte-Carlo simulation(MCS). The electron energy distribution function in each SiH$_4$-Ar mixtures at E/N=10 Td and L=0.2 cm, which in equilibrium region in the mean electron enregy were compared.red.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.221-228
• /
• 2015

Colloidal particles consisted of individual nanosized magnetite grains on the surface of the silica cores were obtained by two-stage sol-gel technique. Size distribution and microstructure of the particles were analyzed using atomic force microscopy, X-ray diffraction and Nitrogen thermal desorption. Magnetic properties of the particles were studied by the method of the longitudinal nonlinear response. It has been shown that nanoparticles of magnetite have a size corresponding to a superparamagnetic state but exhibit hysteresis properties. The phenomenon was explained using the magnetostatic interaction model based on the hypothesis of iron oxide particles cluster aggregation on the silica surface.

• Journal of Nutrition and Health
• /
• 제27권6호
• /
• pp.583-590
• /
• 1994

The longitudinal changes in the transitional milk yields of Korean lactating women(14 primiparae, 11 multiparae) have been studied by test-weighing method in the part of Kangwon Province form 7 day to 15 days postpartum. The transitional milk yields at 7, 10, 15 days postpartum were 531$\pm$148,598$\pm$156 and 639$\pm$169g, respectively. The mean milk yield was 589$\pm$162g from 7 to 15 days postpartum. The transitional milk yields between primiparae and multiparae appeared not significantly different but significantly different between mothers of boys and girl(p<0.05). The distribution of individual transitional milk yields were found 550-649g(28.0%), 450-549g(24.0%), 650-749g(13.3%) and 750-849g(13.3%). The transitional milk yields were not affected by mother's age, weight gain during pregnancy, gestational period and infant's weight at birth but affected by maternal height(p<0.05). Maternal weight reduction during the lactation had no correlation with the transitional milk yeilds.

• Communications for Statistical Applications and Methods
• /
• 제18권6호
• /
• pp.751-759
• /
• 2011

The method of generalized estimating equations(GEE) is widely used in the analysis of a correlated dataset that consists of repeatedly observed responses within subjects. The GEE uses a quasi-likelihood equations to find the parameter estimates without assuming a specific distribution for the correlated responses. In this paper we study the importance of specifying the working correlation structure appropriately in fitting GEE for correlated counts data. We investigate the empirical coverages of confidence intervals for the regression coefficients according to four kinds of working correlations where one structure should be specified by the users. The confidence intervals are computed based on the asymptotic normality and the sandwich variance estimator.

• Journal of the Korean Statistical Society
• /
• 제33권4호
• /
• pp.367-379
• /
• 2004

This article deals with the nonparametric analysis of longitudinal data when there exist possible correlations among repeated measurements for a given subject. We consider a quasi-likelihood regression model where a transformation of the regression function through a link function is linear in time-varying coefficients. We investigate the local polynomial approach to estimate the time-varying coefficients, and derive the asymptotic distribution of the estimators in this quasi-likelihood context. A real data set is analyzed as an illustrative example.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.163-175
• /
• 2011

The results of experimental and numerical investigations on reinforced concrete beams, with different longitudinal rebars affected by corrosive processes are presented in this paper. Different diameters and/or different distributions of longitudinal rebars were employed keeping constant the total section in each analyzed case, (maintaining a constant stirrup diameter and distribution). The rebars were subjected to accelerated corrosion in the experimental study. Electrochemical monitoring of the process, periodic measuring of the cover cracking and gravimetry of the rebars were performed through the test. Some building recommendations are obtained in order to be considered by designers of concrete structures. The numerical simulation was carried out through the application of the Finite Element Method (FEM), employing plane models, and using linear-elastic material model. The cracking process was associated with the evolution of the tensile stresses that were originated. This numerical methodology allows the monitoring of the mechanical behavior until the beginning of the cracking.