• Journal of Korean Academy of Nursing
• /
• v.26 no.3
• /
• pp.709-729
• /
• 1996

This study was done to analyze the trends of research on coping in Korea, to suggest future direction, for research on coping, and ultimately to contribute to an increase in explanation of adaptation. This article reviewed 79 nursing research papers on coping done since 1978 by examining them according to the period of publication or presentation, research design, type of subjects, measurement instruments, research for a degree or not, range of reliability, and association of coping and related variables. The results are as follows : The number of studies on coping increased rapidly from the mid-1980's and decreased slowly from the mid-1990's. The maority of the studies were surveys, comparative studies, or correlational studies. The subects of the 46 studies were healthy people, while those in the remaining studies were patients with a variety of illnesses. Thirth-eight studies on coping were done for master's thesis, three for dissertion, and 38 were not degrees. The Bell and Jalowiec coping scales have not been used since the early 1990's. In contrast, Lazarus and Folkman's W.C.C.L. has been used increasingly since that time. The reliabilities of the coping scale were reported in 37 cases and the Cronbach's alpha coefficients were .71 to .86. All subjects reported using more problem-oriented coping than emotion-oriented coping in short-term or emotion-oriented coping and healthy groups did more long-term coping. It was difficult to describe consistently the relationship between stress and coping according to the type of coping scale or research subjects, but generally moderate relationships were found. This was due to instrumental problems and no consideration of situational context. The subject group who used more short-term coping and less long-term coping reported poorer mental status, and higher scores in burnout and state anxiey than others. That is, the relationship between stress and adaptation increased the power of explanation with intervening the mediating effect of coping. The association of locus of control, mastery, social support, and self-concept with coping showed positive relationships : those of uncertainty and severity in illness with coping showed negativerelationships ; those of state anxiety and depression with short-term coping were positive, and those of self-esteem with long-term coping or problem-oriented coping were negative. There were significant differences in the scores of types of coping according to religion, level of education, and socio-economic status. That is, Presbyterians and Catholics, those with higher education levels and higher socio-economic status used more long-term or problem-oriented coping. On the basis of the above findings the following recommendations are made : 1. There is a need to test the mediating effect of coping variable in order to clarify the concept. 2. Longitudinal studies are needed to determine the patterns of change in coping strategies when stressful events are encountered. 3. It's necessary to develop a reliable and variable measurement tool for coping. 4. There is a need to identify subscales of coping to increase explanation of variance 5. It's necessary to consider personal, situational, and antecedent variables : the characteristics of subject populations, the natures of illness and treatment situations. 6. The power of explanation of studies designed to identify the stress-adaptation process should be increased using the combination model of process-oriented coping and cognitive-structural model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1297-1305
• /
• 2004

Reliability of MEMS devices is receiving more attention as they are heading towards commercial production. In particular are the reliability and long-term stability of wafer level vacuum packaged MEMS gyroscope sensors subjected to cyclic mechanical stresses at high frequencies. In this study, we carried out several reliability tests such as environmental storage, fatigue, shock, and vibration, and we investigated the failure mechanisms of the anodically bonded vacuum gyroscope sensors. It was found that successful vacuum packaging could be achieved through reducing outgassing inside the cavity by deposition of titanium as well as by pre-taking process. The current gyroscope structure is found to be safe from fatigue failure for 1000 hours of operation test. The gyroscope sensor survives the drop and vibration tests without any damage, indicating robustness of the sensor. The reliability test results presented in this study demonstrate that MEMS gyroscope sensor is very close to commercialization.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.3
• /
• pp.71-79
• /
• 2008

Generally the price of agricultural products has much different characteristics from that of manufacturing products. If products have the limitation of long-term storage and the short period of cultivation, the price of products can be more unstable. Moreover, the price forecasting is very difficult because it doesn't follow any cycle or trend. However price can be regarded as risk instead of uncertainty if we can calculate the probability of price. Reliability analysis techniques are used for forecasting the price change of Chinese cabbage. This study aims to show the usability of reliability analysis for price forecasting. A price-forecasting model was developed based on weather data of the first 10 days of the full cultivating cycle (80 days) 70 days and the average price and standard deviation of wholesale market prices from 1996 to 2001 and applied to forecast the boom price, or the orice which is over the tolerance of market prices, of upland Chinese cabbage in 2002 and 2003. Applied results showed the possibility of boom price forecasting using reliability analysis techniques.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.89-95
• /
• 1998

Maintenance scheduling of generators plays an important role in evaluating supply reliability of power systems. Since generators must be maintained and inspected, the generation planner must schedule planned outages during the year. Several factors entering into this scheduling analysis include: seasonal load-demand profile, amount of maintenance, size of the units, elapsed time from last maintenance, and availability of maintenance crew. This paper proposes a new maintenance scheduling algorithm for the alternatives of long-term generation expansion planning by using LOLP levelization method which is known as an effective method for the generator's maintenance scheduling. To get the best supply reliability of power systems, we change the maintenance period to levelize the reliability over all period. The proposed algorithm is applied to a real size power system and the better reliability results are obtained.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.22-28
• /
• 2010

This paper describes a web-based design review system as a knowledge management system relating reliability and safety system design. Since people's consciousness for safety and security become sensitive and increases the need of establishing a proactive prevention method for internal failures and relating risks in products. It also means that prevailing tacit knowledge in retired workers, in order to transform them to be easily used to support new system development, become more important. When considering safety and reliability design, at least two data sheet are necessary; Failure Modes and Effects Analyses (FMEA) and Risk Assessment (RA). These two data are practically made separately. However, it includes the concerns that a risk by failures during long-term use may not be noticed. To overcome this insufficiency, a support tool for integrating reliability evaluation and risk assessment data simultaneously is expected to be revealed. The authors have then developed a web-based design review system for reliability and safety system design. The system include various profitable functions; making FMEA and RA sheet, retrieving past data sheet for engineering change management and new product development and web-based discussion to increase the efficiency of discussion. The system is applied to one practical development works in order to demonstrate its effectiveness that is to be made clear by interviewing user's qualitative comment.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.560-562
• /
• 2004

$SF_6$ gas has been increasingly used as the insulating and arc-suppressing medium in switchgears which are used as the protection devices of power system. Nowadays, most of power companies adopted the $SF_6$ gas-type load break switch for increasing the reliability of distribution network by its superior durability against external environmental condition, in substitution for air-type and oil-type switches. But, it is important to establish the general estimation process for the testing and estimation for long-term reliability Accordingly, the national standard(RS C0031) was made for the reliability assessment of $SF_6$ gas load break switch and the testing facilities were also set in KERI(Korea Electrotechlology Research Institute). This paper presents the requirements of RS C0031 for reliability assessment of $SF_6$ gas load break switch and synopsis of the accelerated life testing facilities for $SF_6$ gas load break switch.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.426-428
• /
• 2015

The NGK suspension insulators are subjected in harsh environments in service above 40 years long time. The long term reliability of the insulators is required for both mechanical and electrical performances. This study describes some electrical performances according to KEPCO-standard. There was fail in electrical and mechanical performance test such as galvanizing, low-frequence wet flashover voltage, puncture and combine mechanical & electrical strength test. The NGK suspension insulators of 1968 were shown lower electrical and mechanical performance than those of 1979.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.88-94
• /
• 2014

In this paper, Thermal Shock tests were performed varying the composition of the solder and ribbon thickness (A-type:0.2mm/60Sn40Pb, B-type:0.25mm/60Sn40Pb, C-type:0.2 /62Sn36Ag2Pb, D-type:0.25mm/62Sn36Ag2Pb) for evaluating the long-term reliability about Ribbon junction of Silicon solar cells. Thermal Shock test condition was performed during the 600cycles having $-40^{\circ}C{\sim}85^{\circ}C$ temperature range each 15 minutes; One cycle time was 30min. As a result, the initial efficiency of the A-type, B-type, and C, D-type were showed 15.0%, 15.4% and 15.8% respectively. After thermal shock test, the efficiency decreasing-rate of each type were as follow that A-type was 13.8%, B-Type was 15.4%. C-Type and D-Type was 15.3% and 16.2%, respectively. Also, degradation of surface changes and I-V characteristic curves were showed that the series resistance of the A, C-type was increased. Also, current lowering starting point of C-type shown 0.05volt[v] earlier than that of A-type. And B, D-type shown characteristics of composite lowering efficiency such as increase of series resistance, decrease of parallel resistance and cell damage. Therefore Initial solderability and efficiency of specimens using the solder with SnAgPb were superior. But, It has inferior the long-term reliability. The test was confirmed that as the ribbon thickness increases, long-term reliability of solar cell will decrease.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.157-159
• /
• 2002

In order to obtain reliability and extend life of GAS Voltage Transformer in GIS, it has to prevent aging by overvoltage considered to insulation characteristics of insulating material. This paper describes some characteristics of V-T characteristics and partial discharges.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.57-58
• /
• 2006

As the power density and switching frequency increase, thermal analysis of power electronics system becomes imperative. The analysis provides valuable information on the semiconductor rating, long-term reliability. In this paper, thermal distribution of the Non Punchthrough(NPT) Insulated Gate Bipolar Transistor has been studied. For analysis of thermal distribution, we obtained results by using finite element simulator, Ansys and thermal distributions form experiments.