• Journal of Welding and Joining
• /
• 제23권5호
• /
• pp.43-48
• /
• 2005

Conventional non-destructive techniques for inspection of the weld in pipelines require significant test time and high cost. Ultrasonic guided waves have been widely studied and successfully applied to various non-destructive tests with advantage of the long-range inspection. In this paper, a study on the application of ultrasonic guided waves to the long-range inspection of the pipeline is presented using a long-range guided wave inspection system, Wavemaker SE16, GUL. The characteristics and setup of the long-range guided wave inspection system and experimental results in pipes of with various diameter are introduced. The experimental results in mock-up pipes with cluster type detects show that the minimum detectable wall thickness reduction with this guided wave system is $2\~3\%$ in the pipe cross section area. And the wall thickness reduction of $5\%$ in cross section area can be detected when actual detection level is used. Therefore, the applicability of the guided wave systeme to long-range inspection of wall thickness reduction in pipes is verified.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1956-1962
• /
• 2010

The formation of diverse spiral waves was studied in a polyacrylamide gel membrane with ruthenium(4-vinyl-4'-methyl-2,2'-bipyridine)bis(2,2'-bipyridine)bis(hexafluorophosphate) by a gas-free Belousov-Zhabotinisky (BZ) reaction system containing 1,4-cyclohexanedione (1,4-CHD). The gel membrane was found to be receptive for observing propagating waves since a clearer wave-train is obtained during a long reaction time without any disturbance from the immobilized metal catalyst which can be dissolved into the highly acidic solution of the BZ system. The distinctive waves in the system basically depend on both $BrO_3$ and 1,4-CHD in the initial phase, and are influenced by the intensity of illumination of visible light.

• 산업기술연구
• /
• 제21권B호
• /
• pp.175-185
• /
• 2001

A numerical model is represented to calculate the reflected waves, the runup of waves and the wave induced velocities on impermeable slopes for the normally incident wave trains of nonlinear monochromatic wave and solitary wave. The finite amplitude shallow water equations with the effects of bottom friction are solved numerically in time domain using an explicit dissipative Lax-Wendroff finite difference method. The numerical model is verified by comparisons with the other numerical results, the measured data and asymptotic results. It is found that the uprushing and downrushing of incident waves may be accurately predicted by the present numerical model. Therefore, the present numerical model can be applicable to swells as well as long waves.

• 한국해양공학회지
• /
• 제16권4호
• /
• pp.7-12
• /
• 2002

This study is aimed to find the scouring mechanism at the toe of rubble mound structures. To investigate the characteristics of scouring in front of the structure, experiments were performed with regular waves in a 2-D flume. The results of this study are as follows. 1) It can be said the characteristics of incident wave causes rolling and sliding of armour block. The difference of wave pressure on the slope, internal flow as well as settlement of armour block due to the weight cause scouring. 2) It is observed that scouring depth at the toe increased when wave height or period increased. The location of ultimate scouring and deposition depth moved seaward when wave period increased. 3) The failure of rubble mound structure was caused by waves or scouring. Failure by erosion increased with high waves and long waves. 4) Using surf-similarity parameter including characteristics of incident waves and structure, scouring and deposition pattern were found and their limit was formulated.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.31-36
• /
• 1998

By using wind vectors observed by NSCAT and significant wave heights observed by TOPEX/POSEIDON and ERS-2 altimeters, one-dimensional fetch growth of wind waves Is investigated under conditions of strong wind and high waves of the East Asian winter monsoon. The evolution of fetch-limited wind waves can be observed by the altimeters along the ground tracks. The fetch is estimated by using vector wind field observed by NSCAT. The derived growth characteristics of wind waves are compared with empirical relationships between the non-dimensional fetch and significant wave height proposed by previous studies. Good agreement with the empirical fetch graph formula normalized by the friction velocity is discemible, while the formulas normalized by the wind speed at a height of 10 m tend to underestimate the wave height under such severe conditions of high wind and very long fetch.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.231-234
• /
• 2008

This paper is concerned with the analysis of elasto-plastic stress waves by a time discontinuous variational integrator based on Hamiltonian in order to more accurate results in one dimensional dynamic problem. The proposed algorithm adopts both time-discontinuous variational integrator and space-continuous Hamiltonian so as to capture discontinuities of stress waves. This study enables to preserve total mechanical energy such as internal energy, kinetic energy and dissipative energy due to plastic deformation for long integration time. Finite element analysis of elasto-plastic stress waves is carried out in order to demonstrate the accuracy of the proposed algorithm.

• 한국해안해양공학회지
• /
• 제14권1호
• /
• pp.51-64
• /
• 2002

협수로로 연결된 속초항과 청초호의 장주기파 공진을 검토하기 위하여 항내·외 8개 정점에서 파향·파고계, 초음파식 파고계, 수압식 파고계, 유속계 등을 이용하여 장·단주기파 현장관측을 실시하였다 자료 분석 결과 속초항과 청초호의 Helmholtz 공진 모드의 주기는 각각 13.6분과 54.5분으로 제시되었으며, 협수로 내 주된 유속의 출현 주기는 55.2분으로 청초호의 Helmholtz 공진 조건에 지배됨을 알 수 있었다. 저중력파로 인한 국부 부진동의 에너지 수준은 평상시보다 폭풍시에 훨씬 더 큰 것으로 나타났다. 항내·외 정점에서의 저중력파 파고와 항외의 단주기파고에 대한 회귀분석 결과 양자는 거의 선형적인 상관 관계를 가지는 것으로 나타났다. 그러나 양자의 주기들, 단주기 파향과 저중력파 파고, 단주기 파고와 저중력파 주기 사이에는 특별한 상관 관계를 발견하지 못하였다. 한편, 향후 장기간 자료가 축적되면 속초항 해역에서의 저중력파 파고에 대한 극치 해석을 통하여 재현빈도별 저중력파 파고를 추정할 수 있을 것으로 사료되었다.

• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.547-558
• /
• 2008

최근 폭증하는 해상물동량으로 인해 선박은 날로 대형화되며 현재 우리나라에서는 이러한 추이에 대응하기 위해 초대형 항만건설이 서둘러 진행되고 있으며 그 중 일부는 이미 부분적으로 완성되어 운영 중이거나 계속적인 확장이 예정되어있다. 초대형 항만의 경우 항 정온도 확보를 위해 대형 직립형 방파제가 수반되기 마련이나 비교적 높은 반사율로 인해 장주기의 파랑에 취약한 구조적 문제를 지닌다. 장주기 파랑의 효과적 제어를 위해 본 고에서는 아치형 curtain wall과 유수실로 구성된 된 장파 제어체 -Eco-breaker 2- 가 제시되며 Eco-breaker 2의 수리특성을 수치적으로 규명하였다. 수치모형은 가장 강건한 파랑모형인 Navier-Stokes Eq.과 SPH(Smoothed Particle Hydrodynamics), LES(Large Eddy Simulation) 기법에 기초하여 구성하였다. 수치모형의 검증을 위한 수리모형실험도 병행하였다. 수치모의 결과 Eco-breaker 2는 유수실 내부에 생성되어 아치형 curtain wall 전면 수역과 유수실을 주기적으로 넘나드는 대규모 구조적 와로 장파를 효과적으로 제어할 수 있었다. 또한 대규모 구조적 와의 생성 영역과 세기는 내습하는 파랑의 주기에 종속하며 유수실 체류시간이 입사파 주기의 반을 하회하는 경우 반사계수는 최대 0.18까지 낮아진다. 이러한 결과는 Eco-breaker 2가 환경친화적 항의 개발에 적극적으로 활용될 수 있음을 시사하는 것으로 이를 위해 그 구체적 제원도 함께 제시하였다.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.357-372
• /
• 2007

Parametric density concept is proposed for a long-range pipeline health monitoring. This concept is designed to obtain the attenuation of ultrasonic guided waves propagating in underwater pipelines without complicated calculation of attenuation dispersion curves. For the study, three different pipe materials such as aluminum, cast iron, and steel are considered, ten different transporting fluids are assumed, and four different geometric pipe dimensions are adopted. It is shown that the attenuation values based on the parametric density concept reasonably match with the attenuation values obtained from dispersion curves; hence, its efficiency is proved. With this concept, field engineers or inspectors associated with long-range pipeline health monitoring would take the advantage of easier capturing wave attenuation value, which is a critical variable to decide sensor location or sensors interval.

• 한국해안해양공학회지
• /
• 제5권3호
• /
• pp.232-239
• /
• 1993

연안역에서의 파동이 오염원의 확산에 미치는 영향에 관한 연구를 수행하였다. 천해근사를 사용하여 기존의 확산방정식을 수심에 관하여 적분함으로써, 임의의 진폭을 갖는 장파조건 및 임의의 흐름조건에 대하여 적용가능한 방정식을 유도하였다. 수립된 방정식을 사용하여 장파가 오염원의 농도에 영향을 미치는 여러 경우에 대하여 고찰하였다.