• Journal of Gifted/Talented Education
• /
• v.25 no.6
• /
• pp.817-836
• /
• 2015

This research focuses on the development of gifted child behavior checklist which feasibly has application on the nation-wide gifted children observation-recommendation method. Corresponding measure has significance as it reflects actual observations of teachers teaching gifted children first-hand and involves measure of importance regarding each characteristic. An open survey on gifted children behavior characteristics lists and specific behavior patterns has been acquired from teachers in gifted education, and the checklist was developed through expert group review, pre-test, and confirmatory factor analysis process. The former checklists have shown several difficulties on application of observation-recommendation on the field due to behaviors that can't be observed in school, less important behaviors, and collide and duplicate behaviors etc. With regard to such problems, problematic clauses were removed based on the observation probability and importance of the behaviors. Ultimately, total of 32 behavior characteristic checklist consisting of ten sub factors(logical thinking, high achievement, originality, perfectionism, creative problem solving, curiosity, task commitment, conversation ability, creativity, passion) and two to three questions on each factor had been drawn. Through internal consistency test and item-total score correlation, each item of the measure has been analyzed to be consistently evaluating corresponding variables. In addition, the result of confirmatory factor analysis showed every item to be weighed appropriately on its sub-factor, strongly suggesting its feasibility on observation-recommendation of elementary gifted children as an appropriate checklist.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.675-683
• /
• 2009

RC6 which has different algorithm of encryption and decryption has been proposed to have the same algorithm between encryption and decryption through inserting symmetry layer using simple rotate and logical operation. That means the half of whole RC6 round uses encryption algorithm and the rest of it uses decryption one and symmetry layer has been put into the middle of encryption and decryption. The proposed RC6 algorithm has no difference with the original one in the speed of process. However it is quite safe because by inserting symmetry layer the path of high probability which is needed for differential and linear analysis is cut off so that it is hard to be analyzed. The proposed symmetry layer algorithm can be easily applied to the algorithm which has different encryption and decryption and make it same, and it can be good idea to be used to design a new block cipher algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.247-250
• /
• 2008

RC6 which has different algorithm of encryption and decryption has been implemented to have the same algorithm between encryption' and decryption though inserting symmetry layer using simple rotate and logical operation. That means the half of whole RC6 round uses encryption algorithm and the rest of it uses decryption one and symmetry layer has been put into the middle of encryption and decryption. The proposed RC6 algorithm has no difference with the original one in the speed of process. However it is quite safe because by inserting symmetry layer the path of high probability which is needed for differential and linear analysis is cut oft so that it is hard to be analyzed. The proposed algorithm can be easily applied to the algorithm which has different encryption and decryption an make it same, and it can be good idea to be used to design a new block cipher algorithm.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2016

Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1755-1764
• /
• 1997

In this paper, we proposed the mechanism for the buffer allocation and a cell scheduling method with logical separation a single buffer in the ATm switch, and analyzed the cell loss probability and the delay of each trafic (CBR/VBR/ABR) based on the weighted value and the dynamic cell service scheduling algorithm. The proposed switch buffering system classifies composite trafics incoming to the switch, according to the characteristic of traffic, then stores them in the logically separated buffers, and adopts the round-robin service with weighted value in order to transmit cells in buffers though one output port. We analyzed 4 cell service scheduling algorithms with dynamic round-robinfor each logically separated service line of a single buffer, in which buffers have the respective weighted values and 3 classes on mixed traffic which characteristized by traffic descriptor. In simulation, using SIMCRIPT II.5., we model the VBR and the ABR traffics as ON/OFF processes, and the CBR traffic as a Poisson processes. As the results of analysis according to the proposed buffer management mechanism and cell service algorithm, we have found that the required QoS of each VC can be quaranteed depends on a scale of weighted values allocated to buffers that changed the weighted values, and cell scheduling algorithm.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.392-403
• /
• 1997

There is a strong international move towards performance based fire regulations for buildings with New Zealand and Australia at the forefront of research in this fold. The reform of regulations is thought to offer more innovation and flexibility in building design and greater cost effectiveness in construction. An important part of the research in this area is related to the development of agreed approaches to fire safety design, such as the Fire Code Reform Centre's "Fire Engineering Guidelines" or New Zealand's "Fire Engineering Design Guide". Such design process documents have incorporated or referenced much of the latest research in areas such as: tenability criteria fire compartment models egress models risk assessment. Use of such design guidelines or equivalents in major projects in countries such as Hong Kong and Australia have highlighted where fro engineering can offer real benefits to building designers and ultimately building owners and operators. However, there is still much research to be done and use of a systematic, logical design approach clearly identifies where design data or modelling techniques are still urgently required. Such areas are: fire growth rates and peak heat release rates for non-residential occupancies pre-movement times related to egress experimental validation and limits of applicability of CFD and other compartment Ire models probability/reliability data on fire protection systems for risk based analysis. Examples from case studies will be shown where lack of such research and poor judgement can lead to inferior design solutions or where unnecessarily conservative designs can lead to cost excesses. In summary, the link between Ire engineering designers and the research community is very important to highlight areas of fire research that will have the most benefit to the building and construction industry.nstruction industry.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.244-244
• /
• 2015

Managed Aquifer Recharge (MAR) in the form of Aquifer Storage and Recovery (ASR) systems are being applied for numerous water augmentation projects both in developed and developing countries. Given the onset of Climate Change and its influence on weather patterns and land use, it has been acknowledged the utilization of this technology will be ever increasing. This technique like all others does have its drawbacks or disadvantages, whereby to overcome these drawbacks or disadvantages it is recommended that logical planning process be followed. In this study, we developed a decision framework known as "Decision framework for the planning, designing, construction/testing and implementation of subsurface water storage system" to further standardize the planning and design process of subsurface water storage system to increase the probability of having a successful ASR/ASTR project. The formulation of this framework was based on earlier frameworks, guidelines, published papers and technical reports which were compiled into a data collection database. The database of which consider both qualitative and quantitative aspect for example recharge objectives, site location, water chemistry of the native, source and recovered water, aquifer characteristics(hydraulic conductivity, transmissivity, porosity), injection/pumping rate, ecological constraints, societal restrictions, regulatory restrictions etc. The assimilation of these factors into a singular framework will benefit the broad spectrum of stakeholder as it maps the chronological order under which ASR project should be undertaken highlighting at each stage the feasibility of the project. The final stage of which should result in fully operational ASR system. The framework was applied to two case studies and through the application of a modified ASR site selection suitability index (Brown et al., 2005) a score was derived to identify the performance of each site. A high score of which meant a maximize chance of success given the reduce presence of project constraints.