• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.954-956
• /
• 2005

For transformer designers, eddy current loss calculation of steel structure is required to consider temperature rise on transformers. This study describes design of a lock plate for converter transformers by finite element method. The lock plate may be locally heated by fringing flux due to air-gap. 3D finite element analysis is performed and compared so as to minimize eddy loss on the lock plate with different materials and structures

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1865-1870
• /
• 2014

토크 컨버터는 록업 클러치에 의해 엔진으로부터 변속기로 원활하게 동력을 전송하는 데 사용되는 복잡한 터보기계부품이며 유체 클러치 장치와 록업 클러치 장치로 구성된다. 고정 플레이트와 구동 판은 록업 클러치의 일부이며 록업 클러치는 효율과 연료 소비의 개선과 직접적인 관계가 있다. 본 논문에서는, 미케니컬 스토퍼가 장착되어 있는 리테이닝 플레이트의 응력 분포 특성을 분석하였으며. 미케니컬 스토퍼의 형태는 로크 업 클러치의 응력 분포에 영향을 미치는 것을 파악하였다.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.373-379
• /
• 2009

Presented in this paper is a new experimental technique to measure material properties of lock plate of gas turbine plants by using ultrasonic guided wave. In comparison with the mechanical destructive testings, material characterization of the Inconel x-750 was nondestructively carried out in a more efficient manner to discriminate the change in elastic moduli and the poisson's ratio attributed to the variation of heat treatment condition. The proposed technique shows a satisfactory feasibility via the comparative experiments with the imported lock plate specimens. It is also expected that the guided wave technique can cover a longer and wider range as a new cost-&-time-saving inspection tool due to the interaction with a greater part of specimen, compared to a conventional local point-by-point scheme.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.84-92
• /
• 2013

This study improves the formability in fine-blanking the lock plate of car seat belts using a low carbon steel(SM35C) plate. The optimal die design for the forming process is proposed using rules for process planning based on theories and field experiences. The optimal design is analyzed using commercial finite element software in order to solve the fracture problems in the extrusion process. Through the improved layout based on the FEM results, the fracture of the extruded part and the roll over problem are solved. Furthermore, it is demonstrated through the shown from experiments that the extruded part does not break in the modified die.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.695-700
• /
• 2010

가스터빈 날개를 덮고 있는 덮개판(Lock plate)의 재료 물성을 유도초음파를 이용하여 측정을 하였다. Lock plate는 가스터빈 발전소에서 아무 극한 환경에서 작동을 하는 부분 중 하나이다. 초음파 속도와 감쇠계수가 서로 다른 3가지 조건의 열처리상태의 재료 물성을 측정하는데 사용되었다. 일반적인 기계적 파괴 인장실험과 비교했을 때, 인코넬 x-750의 재료특성은 다른 열처리 조건에서 탄성계수와 포아슨비를 활용하여 비파괴적인 방법으로 더 효과적으로 알아냈다. 초음파 속도와 인코넬 x-750의 강도는 서로 비례관계에 있으며, 이러한 재료물성 측정은 여러 산업 분야에서 손상 측정에 활용될 수 있다. 또한 유도초음파 기법을 활용하여 장거리, 광범위한 진단으로 시간과 비용을 절감하는데 도움이 되리라 기대된다.

• 비파괴검사학회지
• /
• 제26권5호
• /
• pp.315-320
• /
• 2006

비접촉 비파괴 응력해석기술인 위상잠금 적외선 열화상기술 (Lock-in infrared Thermography)를 이용하여 V-노치와 원형노치를 갖는 평판의 응력분포해석과 피로한계치를 예측하였다. 반복하중을 받는 시험편의 표면온도 분포를 2차원 열화상으로 측정하고 열탄성효과에 의해 노치 선단에서 응력분포를 예측하였으며 재료의 비가역적 히스테리시스에 의해 발생하는 내재 분산에너지를 측정하여 노치시험편의 피로한계치를 예측하였다. 피로한계응력 이내에서 응력측정 결과는 10% 이내의 정확도를 보였으며, 원형노치와 V-노치 시험편의 피로한계치를 164 MPa과 185 MPa로 예측하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.87-94
• /
• 2018

Purpose: In this study, the defect quantification of thin metal plate was evaluated by using lock-in infrared thermography. Methods: A STS304 standard specimens, which had the artificial-defects of different size, were used. The focal distance between the infrared camera and the specimen was set to 500mm, and the distance between the lump and the specimen was set to 200mm. One halogen lamp with a maximum capacity of 1kW was used, and phase-lock infrared thermal images with a frequency of 1Hz were captured and analyzed. Result: Objectively quantified data values were obtained by analyzing the contrast ratio and signal-to-noise ratio. Conclusion: The possibility of defect diagnosis for thin metal plate was confirmed by using the lock-in infrared thermography technique.

• 드라이브 ㆍ 컨트롤
• /
• 제21권1호
• /
• pp.1-7
• /
• 2024

The locking performance of a multi-plate clutch with a mechanical lock-up system is governed by the engagement algorithm. In this paper, a control algorithm to improve the locking performance of the clutch was studied. A 1D dynamic model was constructed and simulated according to the developed algorithm. The developed algorithm was composed of a method in which the locking device is engaged while generating artificial slip on the friction plate by controlling the piston pressure of the clutch. Furthermore, a case study of the parameters within the developed algorithm was conducted to explore combinations that maximize locking performance and analyze trends according to these parameters.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.273-278
• /
• 2008

In this paper, effects of thermoelastic stress by using lock-in thermography was measured in the cantilever beam. In experiment, a circular holed plate was applied to analyze variation of transient stress under the condition of repeated cyclic loading. And the finite element modal analysis as computational work was performed. According to the surface temperature obtained from infrared thermography, the stress of the nearby hole was predicted based on thermoelastic equation. As results, each stress distributions between 2nd and 3rd vibration mode were qualitatively and quantitatively investigated, respectively. Also, dynamic stress concentration factors according to the change of vibration amplitude were estimated for the resonance frequency.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권5호
• /
• pp.429-438
• /
• 2007

Transport distraction osteogenesis has been introduced recently to correct skeletal malformations and discrepancies in the maxillofacial area. To reconstruct 3-dimensitonal mandibular shape, this transport distraction can be considered with the use of reconstruction plate. A 23-years-old male having unilateral mandibular body and angle defects, who had been operated of partial mandibular resection due to unicystic ameloblastoma, was treated by transport distraction procedures with ThreadLock transport $distractor^{(R)}$ (KLS Martin Co., Germany) through the rail of reconstruction plate (Osteomed Co., USA). After being distracted 35 mm defect from mandibular angle to body, and consolidated for 16 weeks, allogenic bone graft on docking site was performed with removal of transgingival pin. For more than 13 weeks follow up period after consolidation period, gradual increase of radiopacity in the radiographic examination was shown, and the curved mandibular continuity according to the reconstruction plate was made firmly. These transport distraction osteogenesis in the mandible was able to be considered as the good and minimally invasive technique for the reconstruction of mandibular discontinuity. Young patient was also very satisfactory for these results.