• International Journal of Automotive Technology
• /
• v.3 no.1
• /
• pp.41-46
• /
• 2002

Effect of secondary air injection (SAI) on hydrocarbon reduction has been investigated in a single cylinder Sl engine operating at cold-steady/cold-start conditions. The hydrocarbon emission and exhaust gas temperature with and without catalytic converter were compared with continuous and synchronized SAIs, which injected secondary air intermittently into exhaust port. Effects of SAI location, SAI pressure, SAI timing, and location of catalytic converter have been investigated and the results are compared for both SAls with base condition. At cold-steady condition, the rate of HC reduction increased as the location of SAI was closer to the exhaust valve for both synchronized and continuous SAls. The emission of HC decreased with increasing exhaust-A/F when it was rich, and was relatively insensitive when it was lean. The timing of SAI in synchronized SAI had significant effect on HC reduction and exhaust gas temperature and the synchronized SAI was found to be more effective in HC reduction and exhaust gas temperature compared to the continuous SAI . At cold-start condition, when the catalytic converter was located 20 cm downstream from the exhaust port exit, the catalytic converter warm-up period for both SAls decreased by about 50%, and the accumulated hydrocarbon emission during the first 120 s decreased about by 56% and 22% with the synchronized and continuous SAIs, respectively, compared to that of the base condition.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1199-1205
• /
• 2008

The vehicle design engineers have studied the method of applying damping materials to the vehicle bodies by computer simulations and experimental methods in order to improve the vibration and noise characteristics of the vehicles. The unconstrained layer damping, being concerned with this study, has two layers(base layer and damping layer) and proyides vibration control of the base layer through extensional damping. Generally this kind of surface damping method is effectively used in reducing structural vibration at frequencies beyond 150Hz. The most important thing is how to apply damping treatment with respect to location and size of the damping material. To solve these problems, the current experimental methods have technical limits which are cumbersome, time consuming, and expensive. This Paper proposes a method based on finite element method and it employes averaged ESE(element strain energy) percent of total of dash panel assembly for 1/1 octave band frequency range by MSC/NASTRAN. The regions of high ESE percent of total are selected as proposed location of damping treatment. The effect of damping treatment is analyzed by comparing the frequency response function of the SPCC bare Panel and the damping treated panels.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.103-108
• /
• 2015

Maintaining efficient energy consumption and elongating network lifetime are the key issues in wireless sensor networks. Existing routing protocols usually select the cluster heads based on the proximity to the sensor nodes. In this case the cluster heads can be placed farther to the base station, than the distance between the sensor nodes and the base station, which yields inefficient energy consumption. In this work we propose a novel algorithm that select the nodes in a cluster and the cluster heads based on the locations of related nodes. We verify that the proposed algorithm gives better performance in terms of network life time than existing solutions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1883-1890
• /
• 2013

Location detection technology (LDT) is one of the core techniques for location based service (LBS) in wireless communication for improving resource management and quality of services. The location of a mobile station (MS) is estimated using the time of arrival (TOA) technique based on three circles with centers corresponding to coordinates of three base stations (BSs) and radius corresponding to distances between MS and BSs. For accurately estimating the location of MS, three circles should meet at a point for the trilateration method, but they generally do not meet a point because the radius is increased depending on the number of time delay for estimating the distance between MS and BS and the carrier frequency. The increased three circles intersect at six points and the three intersection points among them should be generally placed close to coordinate of the location for the specific MS. In this paper, we propose the shortest distance algorithm for TOA trilateration method, to select three interior intersection points from entire six points. The proposed approach selects three intersection points with the shortest distances between coordinates of MS and intersection points and determines the averaged coordinate of the selected three points, as the location of the specific MS. We demonstrate the performance of the proposed algorithm using a typical computer simulation example.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.149-149
• /
• 2020

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.302-304
• /
• 2002

pharaonis phoborhodopsin (ppR), a photophobic sensor of haloalkaliphilic bacteria, Natronobacterium phar-aonis, has retinal as a chromophore covalently bound to Lys in G-helix via a protonated Schiff base (PSB), as is the same as bacteriorhodopsin (bR). For ppR, the corresponding counter-ion is Asp residue (Asp75) located in C-helix. Here we investigated the influence of the protonated state of this counter-ion and its location on the chromophore configuration. Under alkaline condition, the chromophore configuration of D75E mutant was analyzed by HPLC. D75E had a much larger content of 13-cis isomer: the ratio of 13-cis to all-trans was 6:4 while the wild-type had this ratio of 1 :9. On the other hand, under acidic condition where Glu was associated, D75E had no 13-cis retinal isomer. Mutants whose Asp75 was replaced by neutral amino acids (D75N and D75Q) did not contain 13-cis retinal. Furthermore, retinal isomer compositions and the change in the visible ab- sorption spectra (indicating the dissociation state of Glu75) were measured under varying pH, and these were almost the same dependencies. These results indicate that an important factor determining the 13-cis isomer content is the presence of negative charge of the counter-ion against PSB, but not the size of this residue. Com- parison between the wild-type and D75E in alkaline solutions indicates the influence of the location of the counter-ion.

• Convergence Security Journal
• /
• v.20 no.3
• /
• pp.13-20
• /
• 2020

Recently, the need of researches and developments about WSN(Wireless Sensor Network) technologies, which can be applied to services that require continuous monitoring or services to specific areas where accesses are limited, has gradually increased due to their expansion of application areas and the improvement of the efficiency. Especially, in the defense field, researches on the latest IT technologies including sensor network areas are actively conducted as an alternative to avoid the risk factors that can be occurred when personnel are put in, such as boundary and surveillance reconnaissance and to utilize personnel efficiently. In this paper, we analyze the conditions for increasing the life span of sensing nodes that make up sensor network by applying clustering and location-based techniques and derived the factors for extending the life span of them. The derived factors include CH(Cluster Head) election scheme and optimal path selection from CH to BS(Base Station). We proposed final scheme using derived factors and verified it through simulation experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8B
• /
• pp.716-729
• /
• 2006

The information systems in the most enterprise environments are distributed locally and are comprised with various heterogeneous data sources, so that it is difficult to obtain necessary and integrated information for supporting user decision. For solving 'this problems efficiently, it provides uniform interface to users and constructed database systems between heterogeneous systems make a consistence each independence and need to provide transparency like one interface. This paper presents XMDR that consists of category, standard ontology, location ontology and knowledge base. Standard ontology solves heterogeneous problem about naming, attributes, relations in data expression. Location ontology is a mediator that connects each legacy systems. Knowledge base defines the relation for sharing glossary. Adaptive retrieve proposes integrated retrieve system through reflecting site weight by location ontology, information sharing of various forms of knowledge base and integration and propose conceptual domain model about how to share unstructured knowledge.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.3
• /
• pp.93-102
• /
• 2021

This study was attempted to provide a scientific basis for the problem of location selection by spatial scale for efficient promotion of projects related to green care farm complex. Location potential assessment system in local government scale consists of two major components from demand-side and supply-side consideration. The demand-side aspect considered the characteristics of potential users, while supply-side aspect used total 18 indices over 8 divisions under 3 fields. For the location potential assessment in district scale, total 8 indices under 3 major divisions were considered based on biological, physical, social, and economic environment. The application results of the location potential evaluation system in local government scale(excluding metropolitan cities) showed high location potential in southern Gyeonggi Province and near Busan Metropolitan City. As a result of applying the district-scale location potential evaluation system to Geumsan-gun, Geumsan-eup, Chubu-myeon, and Jewon-myeon have high potential. Further studies to improve the applicability of the developed indices are recommended by enhancing assessment indices, complementing base data, and reinforcing with spatial analysis.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.767-770
• /
• 1999

This paper investigates the performance of the hyperbolic position location(PL) technique in CDMA system. Hyperbolic PL systems are such technology that can provide accurate PL information using the existing cellualr/PCS infrastructure and without requiring additional hardware/software implementation within the mobile unit. The channel simulation is obtained by applying AWGN and multipath fading. The effect of the mobile position within the cell and the number of base stations on the accuracy of the hyperbolic PL technique is investigated.