• Title/Summary/Keyword: localization rate

Search Result 276, Processing Time 0.026 seconds

Indoor Localization in Wireless Sensor Network using LVQ (LVQ를 이용한 무선 센서 네트워크의 실내 위치 인식)

  • Park, Jin-Woo;Jung, Kyung-Kwon;Eom, Ki-Hwan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.5
    • /
    • pp.1295-1302
    • /
    • 2010
  • This paper proposed indoor location recognition method based on RSSI(received signal strength indication) using the LVQ network. In order to verify the effectiveness of the proposed method, we performed experiments, and then compared to the conventional triangularity measurement method. In the experiments, we set up the system to the laboratory, divided the 40 section, and installed 6 nodes as a reference node. We obtained the log-normal path loss model of wireless channels, RSSI converted into the distance. The distance values used as the input of LVQ. To learn the LVQ network, we set the target values as section indices. In the experiments, we determined the optimal number of subclass, and confirmed that the success rate of training phase was 96%, test phase was 91%.

Experimental Determination of Concrete Fracture Properties with Modified S-FPZ Model

  • Yon, Jung-Heum;Kim, Tai-Hoon
    • International Journal of Concrete Structures and Materials
    • /
    • v.18 no.3E
    • /
    • pp.213-219
    • /
    • 2006
  • Modified singular fracture process zone(S-FPZ) model is proposed in this paper to determine a fracture criterion for continuous crack propagation in concrete. The investigated fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and the relationship between crack closure stress(CCS) and crack opening displacement(COD) in the FPZ. The proposed model can simulate the actual fracture energy of experimental results fairly well. The results of the experimental data analysis show that specimen geometry and loading condition did not affect the CCS-COD relation. However, the strain energy release rate is a function of not only specimen geometry but also crack extension. The strain energy release rate remained constantly at the minimum value up to the crack extension of 25 mm, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for specimens of large size. The fracture criterion remained at the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localization. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-cracking and micro-crack localizing behavior of concrete.

The Study of Flow Rate Performance and Engine Application with LPG Composition Rate for LPi Fuel Supplying System Consisted of Turbine Type Pump (터빈방식 연료펌프로 구성된 LPi 연료공급 시스템의 LPG 조성비에 따른 토출성능 및 엔진적용성에 관한 연구)

  • Lim, Mu-Chang;Myung, Cha-Lee;Park, Sim-Soo;Park, Jeong-Nam;Kim, Sung-Kun
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.15 no.3
    • /
    • pp.99-105
    • /
    • 2007
  • Currently, BLDC fuel pump was applied on LPi vehicle using 3rd fuel supply system as liquified phase LPG injection method had already shown better performance than others. Its cost, however, is rather expensive because of drawbacks such as complicated structure, a fault of localization of system. In this work, demonstration system for a developed turbine type fuel pump to replace BLDC system was setup and investigated. This study results that fuel mass flow rate of turbine type pump and injection performance of injector were better compared to BLDC type. Comparing flow rate of summer LPG with that of winter LPG, the flow rate decreased about 25% using winter LPG. Performance applying turbine type LPi fuel pump to engine is confirmed.

A Verification Study on the Demand Performance of Fabric Duct for Localization Development of Naval Vessel (해군 수상함 국산화개발 천 덕트의 요구성능 검증연구)

  • Jung, Young In;Choi, Sang Min;Jung, Hyun Sub;Sim, Min Sub
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.8
    • /
    • pp.468-474
    • /
    • 2020
  • Metal ducts for transporting air conditioning and heating inside ships have recently been replaced by cloth ducts that have the advantage of delivering air evenly to the compartments, with excellent noise reduction in major compartments, such as combat command rooms, steering rooms, and sound detector cabins. Since the performance requirements of fabric ducts for vessels are strict, and the entire length of the ducts was imported from Korea, the government wants to create economic effects through localization of fabric ducts. Air permeability and fire prevention performance tests verified the applicability to naval vessels of fabric ducts developed by Hyundai Heavy Industries and HiDact, and performance requirements presented in the POS were verified. As a result of the tests, the fabric ducts met the requirements for air permeability and fireproof performance.

Acceleration of LU-SGS Code on Latest Microprocessors Considering the Increase of Level 2 Cache Hit-Rate (최신 마이크로프로세서에서 2차 캐쉬 적중률 증가를 고려한 LU-SGS 코드의 가속)

  • Choi, J.Y.;Oh, Se-Jong
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.7
    • /
    • pp.68-80
    • /
    • 2002
  • An approach for composing a performance optimized computational code is suggested for latest microprocessors. The concept of the code optimization, called here as localization, is maximizing the utilization of the second level cache that is common to all the latest computer system, and minimizing the access to system main memory. In this study, the localized optimization of LU-SGS (Lower-Upper Symmetric Gauss-Seidel) code for the solution of fluid dynamic equations was carried out in three different levels and tested for several different microprocessor architectures most widely used in these days. The test results of localized optimization showed a remarkable performance gain up to 7.35 times faster solution, depending on the system, than the baseline algorithm for producing exactly the same solution on the same computer system.

Metabolism of Calcium in the Oocyte Maturation of Rat (흰쥐의 난자성숙에 있어서의 칼슘의 대사)

  • Hong, Soon-Gab;Lee, Joon-Yeong
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.23 no.3
    • /
    • pp.357-366
    • /
    • 1996
  • The present experiments aimed to investigate the metabolism of calcium during oocyte maturation in rat. The concentration of free calcium and calmodulin in oocytes was measured respectively by using of fluo-3/AM and FITC with microscope fluorescence spectrometer. The ultrastructural localization of calcium precipitates in oocytes was observed with the transmission electron microscope. Cumulus-free immature oocytes(GV-oocyte) were cultured in vitro through 15 hours. The free calcium concentration in GV oocyte was $55.9{\pm}3.5nM$. In calcium-containing medium, the free calcium concentration was increased in germinal vesicle breakdown(GVBD) oocyte($64.2{\pm}7.3nM$). In normal medium after calcium chelator treatment ($10{\mu}M$ BAPTA/AM), the free calcium contents were slightly lower than those in control group. In calcium-free medium, the free calcium content was drastically increased in GVBD($72.7{\pm}3.4nM$) and metaphase I - anaphase I ($88.0{\pm}3.4nM$) oocyte. In maturation rate of oocytes, GVBD rate was high in control group($82.9{\pm}6.55%$) and calcium chelator treatment group($91.2{\pm}4.4%$), but in calcium-free medium group, it was low and then the oocyte was degenerated without polar body formation. Relative content of calmodulin in oocyte was significantly(P<0.001) increased in metaphase I - anaphase I than in GV and GVBD oocyte. The calcium precipitates were observed in mitochondria and cytoplasm of GV oocyte but that were not observed in mitochondria of GVBD and metaphase I - anaphase I oocyte. And then the calcium precipitates reappeared in mitochondria of metaphase II oocyte. The above results indicate that changes in free calcium and calmodulin concentration of oocyte occur according to the maturational stages and the extracellular calcium is required during oocyte maturation. Also change of calcium localization in oocyte occurs according to the maturational stages.

  • PDF

Change in the Spatial Structure of Commercial Areas in Daegu (대구시 상업지역의 구조 변화)

  • Kim, Ta-Yeul;Jin, Won-Hyung
    • Journal of the Korean association of regional geographers
    • /
    • v.14 no.4
    • /
    • pp.367-381
    • /
    • 2008
  • The purpose of this paper is to analyze the change in the distribution and hierarchical structure of commercial land use. Tools for analyzing the spatial structure are index of concentration, coefficient of localization and location quotient. This research is applied to Daegu, focusing on the period 1985-2003. During the 1985-2003 period, the growth rate of commercial land use volume amounted to 330%, compared with a population growth rate of 118%. The biggest component of commercial land use is the retail sector. As the lodging, medical, transportation-warehouse and entertainment sectors have the propensity for concentration and comprise the specialized commercial areas in the suburbs, the other sectors arc evenly distributed. Jung-gu has functioned as a downtown core in the hierarchical structure of commercial areas. So, in the structure of commercial land use, Daegu has continued to be a single nuclear structure. But, Dongdaegu Station influence area has evolved into the second order center since 2000. This is the sign of change in spatial structure from single-nuclear pattern to multi nuclear pattern.

  • PDF

Two Kinds of Hybrid Localization System Design Techniques Based on LED IT (LED IT 기반의 두 가지 하이브리드 측위 시스템 설계 기법)

  • Lee, Yong Up;Kang, Yeongsik
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.38C no.2
    • /
    • pp.155-164
    • /
    • 2013
  • Two design techniques for more accurate and more convenient hybrid positioning system with visible light communication (VLC) and ad-hoc wireless network infrastructure are proposed, in order to overcome the problems of high estimation error, high cost, and limited service range of the conventional positioning techniques. First method is based on a non-carrier VLC based hybrid positioning technique for applications involving of low data rate optical sensing and narrow-range visible light reception from transmitter, and long-range positioning. The second method uses a 4 MHz carrier VLC-based hybrid positioning technique for a high data rate optical sensing and wide-range visible light receiving from transmitter, and mid-range positioning applications. In indoor environments with obstacles where there are long-range 7731.4cm and mid-range 2368cm distances between an observer and a target respectively, the hybrid positioning developed with two design techniques are tested, and the proposed system is verified and analyzed in this paper.

Two Back Stress Hardening Models in Rate Independent Rigid Plasticity (변형률 독립 강소성 구성 방정식에서의 이중 후방 응력 경화 모델)

  • Yun S. J.
    • Transactions of Materials Processing
    • /
    • v.14 no.4 s.76
    • /
    • pp.327-337
    • /
    • 2005
  • In the present work, the two back stress kinematic hardening models are proposed by combining Armstrong-Frederick, Phillips and Ziegler's hardening rules. Simple combination of hardening rules using simple rule of mixtures results in various evolutions of the kinematic hardening parameter. Using the combined hardening models the ultimate back stress fur the present models is also derived. The stress rate is co-rotated with respect to the spin of substructure due to the assumption of kinematic hardening rule in finite deformation regime. The work piece under consideration is assumed to consist of the elastic and the rigid plastic deformation zone. Then, the J2 deformation theory is facilitated to characterize the plastic deformation behavior under various loading conditions. The plastic deformation localization behaviors strongly depend on the constitutive description namely back stress evolution and its hardening parameters. Then, the analysis for Swift's effects under the fixed boundaries in axial directions is carried out using simple shear deformation.

Communication Cable Fault Localization Based on Chirp Signal Parameter Estimation (첩 신호 파라메터 추정 기반 통신 케이블 고장점 탐지에 관한 연구)

  • Lee, Chun-Ku;Han, Seul-Gi;Park, Jin-Bae;Yoon, Tae-Sung
    • Proceedings of the KIEE Conference
    • /
    • 2009.07a
    • /
    • pp.1782_1783
    • /
    • 2009
  • Reflectometry that has been used to localize faults on a cable is introduced. One of the key point of reflectometry is finding time delay between the incident and reflected signals. In this paper, we propose new reflectometry that use Gaussian enveloped linear chirp signal, and use Kalman filter to estimate frequency rate parameter of the chirp signal. From the estimated frequency rate parameter, we can measure the time delay. In a simulation assuming open ended cable, the proposed method is proved to give a good estimation results.

  • PDF