• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.184-191
• /
• 2017

This paper presents cluster based hybrid spectrum sensing system for M2M services. For each cluster, secondary nodes within the transmission radius of the primary node use hard decision method through local spectrum sensing to determine whether the primary node exists. And the other secondary nodes and the secondary nodes having poor radio channel conditions judge the existence of the primary node through the soft decision method of the values obtained by performing the cooperative spectrum sensing. In the proposed hybrid spectrum sensing system, the performance according to the number of secondary nodes is analyzed with the conventional system over Rayleigh fading channel. As the number of cooperative sensing users increased to 2, 3 and 4, the cluster error probability decreased to 0.5608, 0.5252 and 0.4001 at SNR of -10[dB] respectively. Since the proposed system uses less overhead traffic, it is found that it is more effective in terms of frequency usage than the conventional system using soft decision-soft decision and soft decision-hard decision methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.802-812
• /
• 2000

Multihop lightwave networks are the optical-fiber based local communication systems that employ WDM(Wavelength Division Multiplexing) technology to fully use the enormous fiber bandwidth without requiring any tunable tranceives. In this paper, we introduce a novel ShuffleNet topology, asymmetric bilayered ShuffleNet(ABS) topology as a multihop WDM network technique. For 1Gb/s transmission system, we compared ABS topology with previously reported ones in terms of common network parameters such as average number of hops, throughput, time delay, and network power function. Through the analysis, the performance of ABS topology was proven to be superior to the existing ones. To decrease the amount of hardware required for implementing ABS system, we also proposed a new WDM channel sharing scheme. For (2, 3) ShuffleNet topology system, the number of wavelengths needed in the system can be reduced dramatically from 96 to 4 by using new scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.178-188
• /
• 2016

The traffic in the wired and wireless networks has increased exponentially because of increase of smart phone and improvement of PC performance. Multimedia services and file transmission such as Facebook, Youtube occupy a large part of the traffic. CDN is a technique that duplicates the contents on a remote web server of content provider to local CDN servers near clients and chooses the optimal CDN server for providing the content to the client in the event of a content request. In this paper, the content request message between CDN servers and the client used the SCRP algorithm utilizing the MST algorithm and the traffic throughput was optimized. The average response time for the content request is reduced by employing HC_LRU cache algorithm that improves the cache hit ratio. The proposed SCRP and HC_LRU algorithm may build a scalable content delivery network system that efficiently utilizes network resources, achieves traffic localization and prevents bottlenecks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9A
• /
• pp.844-851
• /
• 2010

Recently, AODV routing protocol which one of the table driven method for the purpose data transmission between nodes has been broadly used in mobile wireless sensor networks. An existing AODV has a little overhead of routing packets because of keeping the routing table for activity route and re-routes to recovery the routes in route discontinuation. However that has faults in that excesses useless of the network bandwidth to recovery the route and takes a lone time to recovery the route. This paper proposes an efficient route recovery method for AODV based on wireless sensor networks in connection breaks. The proposed method. The propose method controls the number of RREQ message considering the energy's node and distance between nodes to restrict the flooding range of RREQ message while expanding the range of local repair. In test results, the proposed method are compared to existing method, the number of drops decrease 15.43% and the delay time for re-route decrease 0.20sec.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.209-216
• /
• 2009

In the wireless sensor network, flooding is required for the dissemination of queries and event announcements. The simple flooding causes the implosion and the overlap problems, so the simple flooding may result in the reduced network lifetime. Therefore, in this paper, we propose the flooding overlay structure (FOS) so that the overhead caused by flooding can be reduced. We propose two variants of FOS mechanisms, the centralized FOS (CFOS) and the distributed FOS (DFOS). In CFOS, the sink collects the network topology information and selects forwarding nodes based on that information. On the other hand, DFOS allows each sensor node to decide whether to act as a forwarding node or not based on its local information. For the performance evaluation of our proposed mechanisms, we carry out NS-2 based simulations and compare ours with the simple flooding and the gossiping. The simulation results indicate that the proposed FOS mechanisms outperform the simple flooding in terms of the network lifetime and the gossiping in terms of the data delivery ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2167-2172
• /
• 2015

Due to the recent progress in information technology, demand for video imaging devices such as displays has grown. In general, images experience deterioration during the process of transmission due to various reasons. Many studies have boon undertaken on ways o reduce such noise. This paper6 suggests an algorithm that makes a judgment on the noise in order to remove the salt & pepper noise and replaces original pixels if they are non-noise while processing noise according to its density. The suggested algorithm shows a high PSNR of 30.49[dB] for Goldhill images that had been damaged of a high density salt & pepper noise(P = 60%), Compared to the exising CWMF, SWMF, and A-TMF, there were improvements by 17.74[dB], 11.52[dB], and 13.76[dB], respectively.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.286-296
• /
• 2005

This paper presents a stereo-based image compression and transmission system for 3D realistic television. In the proposed system, a disparity map is extracted from an input stereo image pair and the extracted disparity map and one of two input images are transmitted or stored at a local or remote site. However, correspondences can not be determined in occlusion areas. Thus, it is not easy to recover 3D information in such regions. In this paper, a reconstruction image compensation algorithm based on error block concealment and in-loop filtering is proposed to minimize the reconstruction error in generating stereo image pair. The effectiveness of the proposed algorithm is shown in term of objective accuracy of reconstruction image with several real stereo image pairs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.607-610
• /
• 2006

The Digital Frequency Synthesizer(DFS) that generates the wideband signal with hish speed frequency hopping rate and high frequency resolution characteristics was implemented in this paper. The DFS was applied as local oscillator for direct frequency conversion IF modules of DVB-RCS, which directly generates the transmission immediate frequency signal by using DDS and wideband PLL technologies. The DDS technology provides high speed frequency hopping rate and high frequency resolution characteristics, which ate also the DVB-RCS requirement. The wideband PLL technology also provides the wideband signal generation, which is a necessity for direct frequency conversion modules. The implemented DFS provide the spurious suppression characteristic of -50 dBc, frequency resolution of 0.233 Hz and frequency hopping rate of 125 ns, respectively. Also the DFS represent the amplitude flatness of 3 dB and less in the pass-band and phase noise characteristic of -75 dBc/Hz at 1 kHz frequency offset.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.45-48
• /
• 2004

RFID(Radio Frequency Identification) which is emerging from a change in digital convergence paradigm and recently rapidly advancing throughout the overall society is the core technology based on Ubiquitous network. In other words, This is a technology to identify the information of the object and recognize the situation by attaching electrical tag to an object and using Reader that can read the information of the object. With the emergence of the technology, it has turned the existing maintenance of the product into the network and intelligence of the product control by using the bar cord to maintain the product and will lead a revolution throughout overall society by affecting the fields of distribution and product maintenance as well as those of medicines, chemicals and food which the electrical tag can be attached to. this paper shows that utilizing the Bluetooth which is a local wireless telecommunication in the standalone imbedded system can implement the piconet configuration among the Readers and the data telecommunication with the main server

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.223-225
• /
• 2010

In order to minimize the casualties and damages from natural disasters, local terrain and weather phenomena need to be constantly monitored. Various weather monitoring systems are designed to collect and monitor the weather information for disaster prevention. Nowadays, wireless sensor networks have been widely used to transmit the weather information and collected by the base station at a regular interval. In this paper, disaster prevention monitoring system for efficient data transfer of weather information such as temperature, humidity and illumination are designed. Weather information is able to burst the data transmission based on storage of flash memory. Telosb sensor node are used in the research; programmed by nesC language used by TinyOS.