• Journal of Wetlands Research
• /
• v.4 no.2
• /
• pp.57-66
• /
• 2002

The local storm occurred Nakdong river basin from August 4 to 11 of the year 2002, resulting in a record 500-600mm rainfall. The heavy rain continued for more than 10 days and especially between 3 to 4 am of August 9, 50mm per hour local storm occurred in Hanrim-myun area, Kimhae. 8 days after the storm, the water level of Nakdong river rose rapidly and the river flowed backward the branches. T he draining of the protected low wetland was unable and the water level of the inner bank area rose suddenly, causing the inundation in several areas. Baeksan bank of Nam river, Gahyun(Samhak) bank of Hwang river, and Kwangam bank of Shinban river, where the draining facilities were under construction or constructed recently, were failed by the piping around the draining culvert. This study analyze the cause of the damage in Nakdong river banks and suggests the countermeasures for future improvement. The damaged spot of the river bank was surveyed, and the rainfall and the fluctuation in the water levels were reviewed. Finally for the flood inundation prevention at the inner bank area, new floodplain management plan as the protect of low wetland established.

• Journal of Korean Society of Forest Science
• /
• v.23 no.1
• /
• pp.35-39
• /
• 1974

After lasting heavy storm, the overfow from the top of soil saving dam may follow if the outlet is not precisely designed and it causes great damages as a result. Therefore, the peak rate of flood must be premeditated at the time of dam construction and many kinds of erosion control measures should also be constructed to protect against the effects of oveflow causing the damages. In this paper, the daily maximum amounts of precipitation from 1904 to 1972 are used as samples of this statistical analysis for the previous purpose and studying local ranges are limited the number of areas to two; Pusan and Mokpo area, because other areas can not give the data of more than 69 years. Normal distribution, as follows, is used for this statistical study. $$P(X)=\int_{x}^{{\infty}}f(x)dx$$ x: daily maximum amount X: maximum of x P(X): probability to exceed X value The estimates, which are the resultants of statistical analysis, can be locally compared with the real values (daily maximum amounts) by diagram, whether the former truly coincides with the latter. As a result, statistical method canot be used for the premeditation of the amount as well as timing of heavy storms because the estimates donot coincide with the real values in this analysis.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.887-893
• /
• 2018

In this study, the optimum design technology is suggested by using reliability analysis method. Nowadays, urban flood inundation is easily occurred because of local heavy rain. Traditional deterministic design method for storm sewer may underestimate the size of pipe. Therefore, stochastic method for the storm sewer design is necessary to solve this problem. In the present study, reliability model using FORM (First Order Reliability Method) was developed for the storm sewer. Developed model was applied to the real storm sewers of 5 different areas. Probability of exceeding capacity has been calculated and construction costs according to diameter have been compared. Probability of exceeding capacity of storm sewers of 5 areas have been calculated after estimating the return period of rainfall intensity.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.222-225
• /
• 2001

In urban environments, the surface land impermeability fundamentally related to urban growth emphasizes the environmental problems such as the storm water peak flow (so-called the urban flooding) and the pollution. The conventional urban drainage system provides a number of temporary reservoirs intercepting and retaining surface-derived pollutants following their introduction to and deposition upon the impermeable surface. Gully-pots are common features in urban drainage systems in Korea, which were installed for draining rainwater to prevent regurgitation in rainy season and retaining larger particles, hence minimizing pipe blockage problems. When the road runoff conveying sediment enters a gully-pot, the sediment mixes with the gully liquor causing direct pollution of receiving waters. The characteristics of local sediment contamination are usually related to the types of land use activities that take place or have taken place within the area., This study was undertaken to evaluate the spatial and temporal variations of the contamination of gully-pot sediments in Seoul with respect to heavy metals such as As, Cd, Co, Cr, Ni, Pb, Cu and Zn. The heavy metal data were examined according to the land use type. In this paper, sampling sites in Seoul were divided into six groups (commercial area, industrial area, residental area, motor way, rural area, and local pollution).

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.313-318
• /
• 2006

The main cause of natural disaster in Korea is meteorological phenomenon, such as typhoon, heavy rain, storm, rainstorm, heavy snow, hailstorm, overflowing of sea and so on(including thunderstroke, blast, snow damage, freezing and earthquake), and among those disasters, heavy rain takes place most often, and it occupies 80% of total disaster Especially, disaster related to slope collapse (landslide, collapse of retaining wall, burying ect.) takes place every year due to meteorological cause such as localized heavy rain, which is getting stronger. (National Institute for Prevention Disaster, 2002, Meteorological Administration) Accordingly, it is necessary to analyze the features of slope collapse related to natural disaster in Korea, and also to make up counterplan to prevent disaster. This paper will try to analyze potential areas which are susceptible to landslide regarding factors inducing landslide and heavy rain, and to evaluate the potentiality of landslide regarding local particularity of rainfall, furthermore to provide essential information for development of community such as preventing damages from landslide, construction Industry, and effective use of land.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.599-608
• /
• 2009

This manuscript covers the results of field investigation and lab-scale experiments to design a double-layered biofilter system to control urban storm runoff. The biofilter system consisted of a coarse soil layer (CSL) for filtration and fine soil layer (FSL) for adsorption and biological degradation. The variations of flow rate and water quality of runoff from a local expressway were monitored for seven storm events. Laboratory column experiments were performed using seven kinds of soil and mulch to maximize pollutants removal. The site mean concentration (SMC) of storm runoff from the drainage area (runoff coefficient: 0.92) was measured to be 203 mg/L for SS, 307 mg/L for $TCOD_{Cr}$, 12.3 mg/L for TN, 7.3 mg/L for ${NH_4}^+-N$, and 0.79 mg/L for TP, respectively. This study employed a new design concept, to cover the maximum rainfall intensity with one month recurrence interval. Effective storms for last ten years (1998-2007) in seoul suggested the design rainfull intensity to be 8.8 mm/hr Single layer soil column showed the maximum removal rate of pollutants load when the uniformity coefficient of CSL was 1.58 and the silt/clay contents of FSL was virtually 7%. The removal efficiency during operation of double layer soil column was 98% for SS and turbidity, 75% for TCODCr, 56% for ${NH_4}^+-N$, 87% for TP, and 73-91% for heavy metals. The hydraulic conductivity of the soil column, 0.023 cm/sec, suggested that the surface area of the biofilter system should be about 1% of the drainage area to treat the rainfall intensity of one month recurrence interval.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.507-517
• /
• 2012

The main purpose of this study is to address flooding resilient land use management strategy based on the distributional characteristics of storm damage areas in Gyeonggi-do. The employed methods are 1) Exploratory Spatial Data Analysis (ESDA) to understand the spatial patterns of storm damage areas occurred from 2005 to 2009, 2) Local Indicator of Spatial Association (LISA) to examine spatial autocorrelation existed in storm damage areas for the year of 2009. The results show that 1) crop land damage is very sensitive to heavy precipitation, 2) damaged buildings are found in all over the Gyeonggi areas, but relatively more damages are in the regions closed to the City of Seoul, 3) damaged roads-bridges, streams, and reaches are found in mostly rural areas, 4) building and crop land damage occurs mostly in lowlands with different spatial patterns. These findings imply that 1) it will be useful to consider the average distances and slopes of damaged building and crop lands from streams for the decision making of land use management strategy, 2) further management efforts are required in the north, east, and south regions of Gyeonggi areas to prevent roads-bridge, stream, and reach damages, 3) the present land use pattern needs to be carefully investigated by considering the damage clustered areas for the year of 2009 based on watershed and municipality boundaries.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.191-201
• /
• 2018

Recently, the frequency of heavy rainfall is increasing due to the effects of climate change, and heavy rainfall in urban areas has an unexpected and local characteristic. Floods caused by localized heavy rains in urban areas occur rapidly and frequently, so that life and property damage is also increasing. It is crucial how fast and precise observations can be made on successful flood management in urban areas. Local heavy rainfall is predominant in low-level storms, and the present large-scale radars are vulnerable to low-level rainfall detection and observations. Therefore, it is necessary to introduce a new urban flood forecasting system to minimize urban flood damage by upgrading the urban flood response system and improving observation and forecasting accuracy by quickly observing and predicting the local storm in urban areas. Currently, the WHAP (Water Hazard Information Platform) Project is promoting the goal of securing new concept water disaster response technology by linking high resolution hydrological information with rainfall prediction and urban flood model. In the WHAP Project, local rainfall detection and prediction, urban flood prediction and operation technology are being developed based on high-resolution small radar for observing the local rainfall. This study is expected to provide more accurate and detailed urban flood warning system by enabling high-resolution observation of urban areas.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.4
• /
• pp.13-24
• /
• 2020

Abnormal weather conditions have lately been occurring frequently due to the rapid economic development and global warming. Natural disasters classified as storm and flood damages such as heavy rain, typhoon, strong wind, high seas and heavy snow arouse large-scale human and material damages. To minimize damages, it is important to estimate the scale of damage before disasters occur. This study is intended to develop a strong wind damage estimation function to prepare for strong wind damage among various storm and flood disasters. The developed function reflects weather factors and regional characteristics based on the strong wind damage history found in the Natural Disaster Yearbook. When the function is applied to a system that collects real-time weather information, it can estimate the scale of damage in a short time. In addition, this function can be used as the grounds for disaster control policies of the national and local governments to minimize damages from strong wind.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.5
• /
• pp.418-424
• /
• 2015

This paper is about the bow structure design of the ship-typed and turret moored FPSO which is subjected to the bow-flare slamming load in harsh North Sea environments. Quad 204 FPSO project involves the redevelopment of the existing Schiehallion FPSO which is damaged by impact wave loads. Normally all offshore systems including FPSO are designed to withstand the 100 year storm I.e. the storm that happens once every hundred years at the location where the system is installed. Several incidents have revealed that impact loading is important issue for moored floating production systems. In this paper, the design impact loads are estimated considering the ship owner’s specification, measured data from model tests, requirements of the classification society rules and results of numerical simulation analyses. The impact pressure by numerical analysis is 1.8 times greater than required value by CSR adopted by IACS. Based on the selected design load, plastic design formulae allowing the local material yielding are applied for the initial scantling of the bow structure. To verify the structural integrity, FE analyses are carried out considering the local area subjected to the impact wave loads. Their results such as structural arrangement, design loads and scantlings are shown and discussed. It is found that plastic design formulae in adopting Initial design phase give sufficiently conservative results in terms of structural strength.