• Transactions on Electrical and Electronic Materials
• /
• 제6권5호
• /
• pp.225-228
• /
• 2005

In this work, we studied the optimized copper thickness in Cu ECP (Electrochemical Plating). In order to select an optimized Cu ECP thickness, we examined Cu ECP bulge (bump, hump or over-plating amount), Cu CMP dishing and electrical properties of via hole and line trench over dual damascene patterned wafers split into different ECP Cu thickness. In the aspect of bump and dishing, the bulge increased according as target plating thickness decreased. Dishing of edge was larger than center of wafer. Also in case of electrical property, metal line resistance distribution became broad gradually according as Cu ECP thickness decreased. In conclusion, at least $20\%$ reduced Cu ECP thickness from current baseline; $0.8\;{\mu}m$ and $1.0\;{\mu}m$ are suitable to be adopted as newly optimized Cu ECP thickness for local and intermediate layer.

• 한국정보통신학회논문지
• /
• 제4권5호
• /
• pp.943-949
• /
• 2000

영상처리에 의한 물체 해석에 있어서 선의 검출은 중요한 역할을 하는데, 영상에서 선은ridge과 ravine을 검출함으로서 얻을 수 있다. 본 논문에서는 local min 및 local max 연산을 사용하여 ridge 와 ravine을 검출하는 기법을 제시한다. 본 기법은 이들 연산의 침식 및 팽창 특성을 이용하여 방향 정보를 구함이 없이 ridge와 ravine을 검출할 수 있으며, 기존의 해석적 방법에 비해 매우 단순하고 효과적인 방법이다. 실험을 통해 본 기법이 효능을 보인다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.81-90
• /
• 1995

Age hardenable aluminum alloys show high specific strength, good thermal and electrical conductivity as well as lightness, and are typical aircraft materials. High fatigue strength and good resistancy against stress corrosion cracking are also important for aircraft aluminum alloys. Al alloy 7050 has been developed to meet the above mentioned requirements and the use of this alloy as forged aircraft part becomes more important. However, forged 7050 parts showed undersirable structures such as severe local grain coarsening in surface area and unproper metal flow that is degrading mechanical properties. In this paper, microstructural aspects of die forging in the Al alloy 7050 are investigated. Also suggested are the optimal forging conditions for microstructural control of Al alloy 7050.

• 연구논문집
• /
• 통권26호
• /
• pp.113-120
• /
• 1996

Age hardenable aluminium alloys show high specific strength, good thermal and electrical conductivity as well as lightness, and are typical aircraft materials. High fatigue strength and good resistancy against stress corrosion cracking are also important for aircraft aluminium alloys. Al alloy 7050 has been developed to meet the above mentioned requirements and the use of this alloy as forged aircraft part becomes more important. However, forged 7050 parts showed undersiable structures such as severe local grain coarsening in surface area and unproper metal flow that is degrading mechanical properties. In this paper, microstructural aspects of die forging in the Al alloy 7050 are investigated. Also suggested are the optimal forging conditions for microstructural control of Al alloy 7050.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.876-878
• /
• 1999

Internal tin processed Nb3Sn wires with different diameter were locally heated before reaction heat treatment. Local heating at the intermediate state of drawing process decreased the superconducting properties and workability. When the local heating temperatures were higher than melting point of Sn, non-Cu Jc's decreased significantly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.804-806
• /
• 1995

This paper discusses Self-organized Distributed Networks(SODN) as identifier of nonlinear dynamical systems. The structure of system identification employs series-parallel model. The identification procedure is based on a discrete-time formulation. The learning with the proposed SODN is fast and precise. Such properties arc caused from the local learning mechanism. Each local networks learns only data in a subregion. Large number of memory requirements and low generalization capability for the untrained region, which are drawbacks of conventional local network learning, are overcomed in the SODN. Through extensive simulation, SODN is shown to be effective for identification of nonlinear dynamical systems.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.228-232
• /
• 2001

Fatigue strength, electrical conductivity and stress-corrosion-cracking resistance are considered as important factors at aircraft Al alloys, therefore Al7050 alloy has been developed to improve such properties. However, hammer-forged Al7050 parts showed the undesirable structures such as severe local grain coarsening and inhomogeneous material flow, resulted in the degraded mechanical properties. In this paper, process conditions are investigated for elimination of the grain coarsening and improved material flow during forging process by both of experiments and FEM analysis. Particular interest has been given to understand role of preform shape on the grain coarsening behavior and magnitude of the hammer forging load The use of preform has been beneficial for reduction of the forging load and elimination of the grain coarsening. However, in the cases of as received bar and the round bar, which was machined to 2.5mm thickness in surface layer, some degree of local grain coarsening behavior has been observed. The optimized preform shape could be properly designed by applying the FEM simulation.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.236-243
• /
• 2005

This paper presents a new stochastic approach for solving combinatorial optimization problems by using a new selection method, i.e. SA-selection, in genetic algorithm (GA). This approach combines GA with simulated annealing (SA) to improve the performance of GA. GA and SA have complementary strengths and weaknesses. While GA explores the search space by means of population of search points, it suffers from poor convergence properties. SA, by contrast, has good convergence properties, but it cannot explore the search space by means of population. However, SA does employ a completely local selection strategy where the current candidate and the new modification are evaluated and compared. To verify the effectiveness of the proposed method, the optimization of a fuzzy controller for balancing an inverted pendulum on a cart is considered.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.277-283
• /
• 2013

In this study, we propose a novel method for modeling dynamic hysteresis. Hysteresis is a widespread phenomenon that is observed in many physical systems. Many different models have been developed for representing a hysteretic system. Among them, the Duhem model is a classical nonlinear dynamic hysteresis model satisfying the properties of hysteresis. The purpose of this work is to develop a novel method that expresses the local dynamics of the Duhem model by a linear system model. Our approach utilizes a certain type of fuzzy system that is based on Takagi-Sugeno (T-S) fuzzy models. The proposed T-S fuzzy Duhem model is achieved by fuzzy blending of the linear system model. A simulated example applied to shape memory alloy actuators, which have typical hysteretic properties, illustrates the applicability of our proposed scheme.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.125-129
• /
• 1992

When relaxation time will be distributed, TSC observed in the experimental procedure was analysed by using a potential model having two equilibrium positions and equations of dielectric properties was derived. Calculation of distribution was made by matrix method and compared/confirmed values obtained by TSC and alternating current which have a correspondence with each other. In this measurement, distribution of activation energy and relaxation time was determined by TSC peak at around 147k/364 of which center is 10$\^$-4/ sec/10$\^$5/ sec respectively at room temperature and also obtained dielctric loss factor at the range of 10$\^$-7/-10$\^$5/Hz. It seems that low temperature peak is local dispersion and high temperature peak have a relation to dielectric transition of the material.