• Journal of KIBIM
• /
• v.7 no.4
• /
• pp.31-38
• /
• 2017

Big Cyprus watershed, which is located in the Southwestern Florida and covers Everglades National Park that has high proportions of endangered species' habitats, plays an important role for the entire Florida ecosystem. Due to the rapid urbanization and high population growth, however, the watershed has been continuously polluted and the current regional watershed plan is not created to accommodate the speed of growth. The purpose of this study is to suggest proper protection policies and strategies for the Big Cyprus watershed by employing the Inverse Distance Weighted interpolation tool in Geographic Information System. The findings show that conservation priorities should be given in the North and South portion of the watershed area, which are proven to be the most important aisle for the habitats in the Big Cyprus. The study concludes with policy suggestions that local environmental planners should concentrate for adopting their new watershed plan in the near future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.648-658
• /
• 1990

There are many methods for speed up counting in speech recongition. A multiple processing method is the one way to achieve the aim using systolic array. This arithmetic operation by the array is achieved pipelining skill. And the operation is multiprocessing by processing element(PE) that is incresing counting efficiencies. The DTW PE cell is seperated into three large blocks. "MIN" is the one block for counting accumulated minimum distance, "ADD" block calculated these minimum distances, and "ABS" seeks for the absolut values to the total sum of local distances. We have accomplished circuit design and verification about the "ADD" and "ABS" blocks, and performed total layout '||'&'||' DRC(design rule check) using 3um CMOS N-Well rule base.le check) using 3$\mu$m CMOS N-Well rule base.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.381-383
• /
• 1999

In this paper a remote monitoring and control system using SNMP(Simple Network Management Protocol) for UPS (Uninterruptible Power Supply) systems is proposed. The local remote system by RS-232 or RS-485 communication code or the wide remote system by modems is used for conventional remote monitoring & control system for UPSs. But recently because of communication cost and long distance the system is changed to remote control systems through internet and information communication network. And serial communication method by RS-232 or RS-485 is used between agent and UPSs. In this study. we designed and developed the system which is able to control UPSs and to monitor errors. statuses and actual values transmitted from UPS through internet.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.148-148
• /
• 2017

Surface modification is a type of mechanical manipulation skills to achieve extensive aims including corrosion control, exterior appearance, abrasion resistance, electrical insulation and electrical conductivity of substrate materials by generating a protective surface using electrical, physical and chemical treatment on the surface of parts made from metallic materials. Such surface modification includes plating, anodizing, chemical conversion treatment, painting, lining, coating and surface hardening; this study conducted cavitation experiment to assess improvement of durability using anodizing. In order to observe surface characteristics with applied current density, the electrolyte temperature, concentration was maintained at constant condition. To prevent hindrance of stable growth of oxide layer due to local temperature increase during the experiment, stirring was maintained at constant speed. In addition, using galvanostatic method, it was maintained at processing time of 40minutes for 10 to $30mA/cm^2$. The cavitation experiment was carried out with an ultra sonic vibratory apparatus using piezo-electric effect with modified ASTM-G32. The peak-to-peak amplitude was $30{\mu}m$ and the distance between the horn tip and specimen was 1mm. The specimen after the experiment was cleaned in an ultrasonic bath, dried in a vacuum oven for more than 24 hours, and weighed with an electric balance. The surface damage morphology was observed with 3D analysis microscope. As a result of the study, differences were observed surface hardness and anti-cavitation characteristics depending on the development of oxide film with the anodizing process time.

• Journal of Distribution Science
• /
• v.17 no.9
• /
• pp.25-33
• /
• 2019

Purpose - The purpose of the study was to seek to find out what factors having differences between paid membership customers (Costco membership) and general customers in retail industry. Since Costco operates differently from other conventional retailers, which is expected to have a substantial impact on consumers' preference of retail stores. Research design, data, and methodology - The survey conducted covered 1,000 adults in their 30s~50s living in Goyang and Gwangmyeong where Costco runs stores to determine the effects of Costco's local market-entry from consumer perspectives. 500 respondents were surveyed in each region and those working in the retail sector were excluded to ensure the objectivity of the answers. Results - Costco members in Goyang considered the price, bulk purchasing, and membership benefits as important criteria when choosing their retail store. On the other hand, as for Gwangmyeong, the non-member group's prominent characteristic was that they considered accessibility including travel distance and location and in-store amenities including food court services as important criteria for decision-making. Conclusion - Unique business model of Costco shows a statistically significant difference in terms of consumer awareness. the feature of Costco served as an critical criteria for consumers in their purchasing decision. Moreover, Bulk packaging purchases at Costco results in a strong supplementary relationship with neighborhood supermarkets.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.1
• /
• pp.68-75
• /
• 1998

The Intelligent Cruise Control system, ICC, is a driver assisting system for controlling relative speed and distance between two vehicles in the same lane. The ICC may be considered as an extension of a traditional cruise control, not only keeping a fixed speed of the vehicle, but correcting the speed also to that of a slower one ahead. This paper presents a real-time self-tuning fuzzy control algorithm to develop ICC. The self-tuning fuzzy control law is adopted to reduce the effects of nonlinearities of the vehicle and various road environments. In the self-tuning algorithm an interior penalty method is applied to preserve the inherent order of membership functions and is modified as an on-line algorithm for real time application. Via simulations, the performance of the suggested control algorithm is compared with a PID and a fuzzy control without self-tuning. The suggested control algorithm is implemented on PRV III and the results of the test driving on a local road are given.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1354-1372
• /
• 2012

Route establishment in Mobile Ad Hoc Network (MANET) is the key mechanism to a successful connection between a pair of source and destination nodes. An efficient routing protocol constructs routing path with minimal time, less routing overhead and capable of utilizing all possible link connectivity. In general, most on-demand MANET routing protocols operates over symmetrical and bidirectional routing path, which is infeasible due to the inherent heterogeneous properties of wireless devices. Simulation results show that the presence of unidirectional links on a network severely affect the performance of a routing protocol. In this paper, a robust protocol independent scheme is proposed, which enable immediate rediscovery of alternative route for a path blocked by a unidirectional link. The proposed scheme is efficient; route rediscovery is locally computed, which results in significant minimization of multiple route packets flooding. Nodes may exploit route information of immediate neighbors using the local reply broadcast technique, which then redirect the control packets around the unidirectional links, therefore maintaining the end-to-end bidirectional connection. The proposed scheme along with Ad Hoc On-demand Distance Vector (AODV) and AODV-Blacklist routing protocol is investigated over three types of mobility models. Simulation results show that the proposed scheme is extremely reliable under poor network conditions and the route connectivity can be improved by as much as 75%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.529-546
• /
• 2010

Greedy forwarding is the key mechanism of geographic routing and is one of the protocols used most commonly in wireless sensor networks. Greedy forwarding uses 1-hop local information to forward packets to the destination and does not have to maintain the routing table, and thus it takes small overhead and has excellent scalability. However, the signal intensity reduces exponentially with the distance in realistic wireless sensor network, and greedy forwarding consumes a lot of energy, since it forwards the packets to the neighbor node closest to the destination. Previous proposed greedy forwarding protocols are the sender-based greedy forwarding that a sender selects a neighbor node to forward packets as the forwarding node and hence they cannot guarantee energy efficient forwarding in unpredictable wireless environment. In this paper, we propose the receiver-based greedy forwarding called RGF where one of the neighbor nodes that received the packet forwards it by itself. In RGF, sender selects several energy efficient nodes as candidate forwarding nodes and decides forwarding priority of them in order to prevent unnecessary transmissions. The simulation results show that RGF improves delivery rate up to maximum 66.8% and energy efficiency, 60.9% compared with existing sender-based greedy forwarding.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.155-161
• /
• 1994

Accurate positioning method using low cost GPS modules is proposed, which use the technique of differential GPS. DGPS experiments have been made using two coarse-acquisition (C/A) code GPS modules. Position accuracy of better than 5 m was obtained for position dilution of precision (PDOP) of 2-3 and that of better than 10 m after filtering was obtained for PDOP of about 9 in a local area. Static DGPS experiments were performed at Kookmin university with the DGPS correction data of KRISS reference station at Taejon. The distance between two stations is about 140 km. The results show that precision of the position is about 10 m (2 drms), which is ten times better than the results with the GPS module alone. Accuracy of about 10 meters can be obtained in near real time by the DGPS service with a reference station in our country.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.4
• /
• pp.403-411
• /
• 2016

This research has the purpose to develop a method to evaluate whether station’s area of influence has been formed, and verify formation of the area of influence through empirical analysis of all subway stations in Seoul. First, we created buffers of 100m intervals from 100m to 1000m, based on subway station exits, calculated the average land price of each buffer, and divided station areas of influence into 10 clusters using K-means clustering with the average land prices as values of observation. Subsequently, we have assumed a decreasing price curve from increasing distance from a nearby subway station, estimated a price curve and evaluated whether the area of influence actually exists using regression analysis of each cluster. The 10 area of influence clusters were largely divided into strong, weak, and no area of influence of subway station. The stations where the strong areas of influence are formed are mainly located in center, sub-centers, and local centers; stations where weak and no areas of influence are formed are mostly located in the adjacent areas of center or sub-centers or suburbs.