• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.641-652
• /
• 2007

본 논문에서는 풍하중에 대한 기존 송전철탑의 좌굴 및 구조적 안전성을 평가하기 위해서 축소부분구조 실험을 수행하였다. 원 송전철탑에 작용하는 중력 및 풍하중을 재현하기 위해서 1/2크기의 상사법칙을 적용한 축소모델의 상부에 설치된 삼각형태의 지그를 이용하여 가력하는 방법을 고안하였다. 설계하중에 대한 실험체의 안정성을 평가하기 위해서 예비수치 해석을 수행한 결과, 계산된 주주재의 축력은 허용좌굴하중의 $80{\sim}90%$사이에 분포하고 있음을 확인하였다. 최대허용좌굴 하중의 270%까지 가력한 결과, 주주재의 면외거동을 구속하는데 취약한 절점에서 발생한 국부좌굴로 인하여 송전철탑이 파괴되었다. 하중-변위 곡선, 변위, 부재별 변형률을 검토한 결과, 이러한 국부좌굴의 발생은 동일한 단면내에서도 휨모멘트로 인해 항복응력에 도달하는 시간이 위치별로 다르기 때문에 변형의 불균형에 의해서 발생한 부가적인 편심에 기인한 것으로 판단된다.

• 구강회복응용과학지
• /
• 제20권2호
• /
• pp.71-81
• /
• 2004

The purpose of this study was to compare the distributing pattern of stress on the finite element models of two units implant prosthesis with one angulated placement of two implant fixtures. The two unit implant crowns simulated to mandibular first and second molars were made. The two kinds of finite element models were designed according to angulation of fixture ($4.0mm{\times}11.5mm$) : Model 1($15^{\circ}$ buccally angulated placement of one fixture on second molar area), Model 2($15^{\circ}$ lingually angulated placement of one fixture on second molar area). Axial loads of 200N were applied to the center of central fossa and to distance of 2mm and 4mm apart from the center of central fossa. Von-Mises stresses were recorded and compared in the fixtures, and buccolingual section of implants. The results were as follows: 1. Under axial loading at the central fossa, the stress was distributed along the straight fixture except apical portion, while on buccally or lingually angulated placement, the highest stresses were concentrated in the neck portion on the opposite side of the angulated fixture. 2. With offset distance increasing, the stresses were concentrated greater in buccal neck of lingually angulated fixture than in lingual neck of buccally angulated fixture. From the above results, in designing of the occlusal scheme for implant prosthesis with the angulated fixture, occlusal contacts should be placed to distribute stress axially in maximum intercuspation and to avoid offset force during eccentric movements.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1040-1047
• /
• 1999

The characteristics of flame propagation in inert particle-laden $H_2$/Air premixed gas are numerically investigated on this study. The 2nd order TVD scheme is applied to numerical analysis of governing equations and multi-step chemical reaction model and detailed transport properties are sued to solve chemical reaction terms. Radiation heat transfer is computed by applying the finite volume method to a radiative transfer equation. The burning velocities against the mole fractions of hydrogen agree well with results performed by different workers. The inert particles play significant roles in the flame propagation on account of momentum and heat transfer between gas and particles. Gas temperature, pressure and flame propagation speed are decreased as the loading ratio of particle is increased. Also the products behind flame zone contain lots of water vapor whose absorption coefficient is much larger than that of unburned gas. Thus, the radiation effect of gas and particles must be considered simultaneously for the flame propagation in a mixture of $H_2$/Air and inert particles. As a result, it is founded that because the water vapor emits much radiation and this emitted radiation is released at boundaries as radiant heat loss as well as reabsorbed by gas and particles, flame propagation speed and flame structure are altered with radiation effect.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.16-21
• /
• 2010

During the loading/offloading operation of a liquefied natural gas carrier (LNGC) that is moored in a side-by-side configuration with an offshore plant, sloshing that occurs due to the partially filled LNG tank and the interactive effect between the two floating bodies are important factors that affect safety and operability. Therefore, a time-domain software program, called CHARM3D, was developed to consider the interactions between sloshing and the motion of a floating body, as well as the interactions between multiple bodies using the potential-viscous hybrid method. For the simulation of a floating body in the time domain, hydrodynamic coefficients and wave forces were calculated in the frequency domain using the 3D radiation/diffraction panel program based on potential theory. The calculated values were used for the simulation of a floating body in the time domain by convolution integrals. The liquid sloshing in the inner tanks is solved by the 3D-FDM Navier-Stokes solver that includes the consideration of free-surface non-linearity through the SURF scheme. The computed sloshing forces and moments were fed into the time integration of the ship's motion, and the updated motion was, in turn, used as the excitation force for liquid sloshing, which is repeated for the ensuing time steps. For comparison, a sloshing motion coupled analysis program based on linear potential theory in the frequency domain was developed. The computer programs that were developed were applied to the side-by-side offloading operation between the offshore plant and the LNGC. The frequency-domain results reproduced the coupling effects qualitatively, but, in general, the peaks were over-predicted compared to experimental and time-domain results. The interactive effects between the sloshing liquid and the motion of the vessel can be intensified further in the case of multiple floating bodies.

• Structural Engineering and Mechanics
• /
• 제44권5호
• /
• pp.611-631
• /
• 2012

The passive energy dissipation technology has been proven to be reliable and robust for recent practical applications. Various dampers or energy dissipation devices have been widely used in building structures for enhancing their performances during earthquakes, windstorm and other severe loading scenarios. This paper presents a simplified seismic design procedure for retrofitting earthquake-damaged frames with viscous dampers. With the scheme of designing the main frame and the supplemental viscous dampers respectively, the seismic analysis model of damped structure with viscous dampers and braces was studied. The specific analysis process was described and approach to parameter design of energy dissipation components was also proposed. The expected damping forces for damped frame were first obtained based on storey shear forces; and then they were optimized to meet different storey drift requirements. A retrofit project of a RC frame school building damaged in the 2008 Wenchuan earthquake was introduced as a case study. This building was retrofitted by using viscous dampers designed through the simplified design procedure proposed in this paper. Based on the case study, it is concluded that this simplified design procedure can be effectively used to make seismic retrofit design of earthquake-damaged RC frames with viscous dampers, so as to achieve structural performance objectives under different earthquake risk levels.

• 한국정보과학회논문지:시스템및이론
• /
• 제37권5호
• /
• pp.304-313
• /
• 2010

악성코드를 분석하기 위한 기법에는 다양한 방법들이 존재한다. 하지만 기존의 악성코드 분석 기법으로는 악성코드들의 동작들을 정확하게 분석하는 것이 점점 어려워지고 있다. 특히, 분석 시스템들이 악성코드의 안티-디버깅 기술에 의해 감지되기 쉽고, 실행속도 등 여러 가지 한계점을 보임에 따라 이를 해결할 수 있는 분석 기법이 요구되고 있다. 본 논문에서는 동적 코드 분석을 위한 기본 요구사항인 명령어 단위 분석 및 메모리 접근 추적 기능을 제공하는 동적 코드 분석 시스템을 설계 및 구현한다. 그리고 DLL 로딩 추적을 통한 API 호출 정보를 추출하여, 다양한 실행 코드들을 분석 할 수 있는 기반 환경을 구축한다. 제안 시스템은 Intel의 VT 기술을 이용하여 Xen 기반으로 전가상화 환경을 구축하였으며, 게스트에서는 윈도우즈 XP가 동작할 수 있도록 하였다. 제안 시스템을 이용하여 대표적인 악성코드들을 분석해 봄으로써 제안 시스템 각각의 기능들의 활용을 살펴보고, 제안 시스템이 악성코드들을 정확하게 분석 및 탐지함을 보여준다.

• 한국농공학회지
• /
• 제38권5호
• /
• pp.74-84
• /
• 1996

Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. For developing a program to analyze the dynamic response of an axisymmetric shell in this study, the material nonlinearity effect on the dynamic response was formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion was numerically solved by a central difference scheme. A complete finite element program has been developed and the results obtained by it are compared with those in the references 1 and 2. The results are in good agreement with each other. As a case study of its application, the developed program was applied to a dynamic response analysis of a nuclear reinforced concrete containment structure. The results obtained from the' numerical examples are summarized as follows : 1. The dynamic magnification factor of the displacement and the stress were unrelated with the concrete strength. 2. As shown by the results that the displacement dynamic magnification factor were form 1.7 to 2.3 and the stress dynamic magnification factor from 1.8 to 2.5, the dynamic magnification factor of stress were larger than that of displacement. 3. The dynamic magnification factor of stress on the exterior surface was larger than that on the interior surface of the structure.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권4호
• /
• pp.216-223
• /
• 2004

본 논문에서는 3차원 비선형 슬러싱 유동에 대한 수치해법을 개발하였다. 탱크내에서 과도한 슬러싱 유동이 일어나는 경우에는 슬러싱 유동에 의해 유기되는 유체 충격력에 의해 탱크 내부 부재나 탱크 자체의 손상을 야기할 수 있다. 비선형 슬러싱 유동을 포텐셜 유동 이론에 근거한 자유표면파 문제로 정식화하고, 엄밀한 비선형 자유표면 경계조건을 적용하여 수치적으로 해석하였다. 안정된 수치 해법 개발을 위해 해밀톤 원리에 근거한 변분법을 사용하였으며 얻어진 변분식에 유한 요소법을 적용하여 해석하였다. 비선형 자유표면 유동은 시간영역에서의 초기치 문제로 해석하였으며 자유표면의 위치는 매 계산 시간 간격마다 반복계산에 의해 결정되었다. 수치 해석 결과로는 탱크내에 위치한 파이프에 비선형 슬러싱 유동에 의해 야기되는 유체 충격력을 구하였다.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.645-669
• /
• 2004

In seismic analysis of moment-resisting frames, beam-column connections are often modeled with rigid joint zones. However, it has been demonstrated that, in ductile reinforced concrete (RC) moment-resisting frames designed based on current codes (to say nothing of older non-ductile frames), the joint zones are in fact not rigid, but rather undergo significant shear deformations that contribute greatly to global drift. Therefore, the "rigid joint" assumption may result in misinterpretation of the global performance characteristics of frames and could consequently lead to miscalculation of strength and ductility demands on constituent frame members. The primary objective of this paper is to propose a rational method for estimating the hysteretic joint shear behavior of RC connections and for incorporating this behavior into frame analysis. The authors tested four RC edge beam-column-slab connection subassemblies subjected to earthquake-type lateral loading; hysteretic joint shear behavior is investigated based on these tests and other laboratory tests reported in the literature. An analytical scheme employing the modified compression field theory (MCFT) is developed to approximate joint shear stress vs. joint shear strain response. A connection model capable of explicitly considering hysteretic joint shear behavior is then formulated for nonlinear structural analysis. In the model, a joint is represented by rigid elements located along the joint edges and nonlinear rotational springs embedded in one of the four hinges linking adjacent rigid elements. The connection model is able to well represent the experimental hysteretic joint shear behavior and overall load-displacement response of connection subassemblies.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.747-753
• /
• 2005

본 논문은 컨테이너크레인의 흔들림제어의 한 방법으로, 이송증인 컨테이너가 임의의 이송궤적을 따라서 움직이도록 하고, 또한 트롤리 및 호이스트의 위치제어를 동시에 수행하는 가변구조제어에 관한 연구이다. 자동화터미널의 야석장에서 A지점에서 B지점으로 컨테이너를 옮기고자 할 때, 쌓여 있는 주위의 다른 컨테이너들을 피하면서 이송시키거나, 혹은 양하역 작업을 장애물이 존재하는 환경에서 수행할 때 주변의 장애물과 충돌하지 않도록 이송궤적을 만들어야 함은 필수적이다. 기존치 연구들이 무조건 흔들림이 작게끔 하는 것에 초점을 맞추었던 것에 반하여 본 논문에서는 비롯 흔들림이 발생하더라도 주어진 궤적을 추종하여 이송되게끔 하는 것에 그 특징이 있다. 트롤리 및 호이스트의 위치 및 속도오차 뿐 아니라 흔들림 각변위 및 각속도오차가 슬라이딩 평면으로 정의되며, 등속구간과 도착구간에서의 제어기가 각각 별도로 설계된다. 리아프노프 방법을 이용하여 안정성을 해석하였으며 파일럿 크레인을 이용한 실험결과를 제시한다.