A simplified design procedure for seismic retrofit of earthquake-damaged RC frames with viscous dampers |
Weng, D.G.
(State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University)
Zhang, C. (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) Lu, X.L. (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) Zeng, S. (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) Zhang, S.M. (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) |
1 | ASCE 7-05 Seismic Provisions (2005), Section 18: Seismic Design Requirements for Structures with Damping Systems, The American Society of Civil Engineers for the Federal Emergency Management Agency, Washington, D. C. |
2 | ATC-33.03 (1997), BSSC Guidelines for the Seismic Rehabilitation of Buildings: Seismic Isolation and Energy Dissipation, Applied Technology Council for the Building Seismic Safety Council and the Federal Emergency Management Agency, Redwood City, California. |
3 | Clough, R.W. and Penzien, J. (1993), Dynamics of Structures, Second Edition, McGraw Hill Inc., New York. |
4 | Dargush, G.F. and Sant, R.S. (2005), "Evolutionary aseismic design and retrofit of structures with passive energy dissipation", Earthq. Eng. Struct. D., 34(13), 1601-1626. DOI ScienceOn |
5 | EC8 (2003), Euro Code 8: Design of Structures for Earthquake Resistance. General Rules, Seismic Actions and Rules for Buildings, EN1998-1: 2003, British Standards Institution, London. |
6 | FEMA 273 (1997), NEHRP Guidelines for the Rehabilitation of Buildings, The Building Seismic Safety Council for the Federal Emergency Management Agency, Washington, D. C. |
7 | FEMA 274 (1997), NEHRP Commentary on the Guidelines for the Rehabilitation of Buildings, The Building Seismic Safety Council for the Federal Emergency management Agency, Washington, D. C. |
8 | Fu, Y. and Kasai, K. (1998), "Comparative study of frames using viscoelastic and viscous dampers", J. Struct. Eng., Am. Soc. Civil Eng., 124(5), 513-522. |
9 | Hanson, R.D. and Soong, T.T. (2001), Seismic Design with Supplemental Energy Dissipation Devices (MNO-8), Earthquake Engineering Research Institute, Oakland, CA. |
10 | Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer B.F., Jr. and Yao, J.T.P. (1997), "Structural control: past, present and future", J. Eng. Mech., ASCE, 123(9), 897-971. DOI |
11 | Hwang, J.S., Wang, S.J., Huang, Y.N. and Chen, J.F. (2007), "A seismic retrofit method by connecting viscous dampers for microelectronics factories", Earthq. Eng. Struct. D., 36(11), 1461-1480. DOI ScienceOn |
12 | JSSI Manual (2003, 2005, 2007), Design and Construction Manual for Passively Controlled Buildings, Japan Society of Seismic Isolation, Tokyo, Japan, 1st Ed., 2nd Ed., 2nd Ed & 2nd Print. |
13 | Kakaletsis, D.J., David, K.N. and Karayannis, C.G. (2011), "Effectiveness of some conventional seismic retrofitting techniques for bare and infilled R/C frames", Struct. Eng. Mech., 39(4), 499-520. DOI |
14 | Kasai, K. and Kibayashi, M. (2004), "JSSI manual for building passive control technology: Part-1 manual contents and design/analysis methods", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, August. |
15 | Lavan, O. and Levy, R. (2004), "Optimal design of supplemental viscous dampers for linear framed structures", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, August. |
16 | Lavan, O. and Levy, R. (2010), "Performance based optimal seismic retrofitting of yielding plane frames using added viscous damping", Earthq. Struct., 1(3), 307-326. DOI |
17 | Li, B. and Liang, X.W. (2007), "Design of supplemental viscous dampers in inelastic SDOF system based on improved capacity spectrum method", Struct. Eng. Mech., 27(5), 541-554. DOI |
18 | Lin, Y.Y., Chang, K.C. and Chen, C.Y. (2008), "Direct displacement-based design for seismic retrofit of existing buildings using nonlinear viscous dampers", Bull. Earthq. Eng., 6(3), 535-552. DOI ScienceOn |
19 | NEHRP 2000 Proposal 12-7 and Chapter 15 (2000), Structures with Damping Systems, The National Earthquake Hazards Reduction Program, Washington, D. C. |
20 | PRC Profession Standard (2011), Technical Specification for Building with Energy Dissipation Devices (Questionnaire Opinion Manuscript), The Ministry of Housing and Urban-Rural Construction of the People's Republic of China, Beijing, China. |
21 | PRC National Standard (2010), Code for Seismic Design of Buildings (GB 50011-2010), The Ministry of Housing and Urban-Rural Construction of the People's Republic of China, China Architecture & Building Press, Beijing, China. |
22 | PRC National Standard (2008), Standard for Classification of Seismic Protection of Building Construction (GB 50223-2008), The Ministry of Housing and Urban-Rural Construction of the People's Republic of China, China Architecture & Building Press, Beijing, China. |
23 | Silvestri, S., Gasparini, G. and Trombetti, T. (2011), "Seismic design of a precast r.c. structure equipped with viscous dampers", Earthq. Struct., 2(3), 297-321. DOI |
24 | Soong, T.T. and Dargush, G.F. (1997), Passive Energy Dissipation Systems in Structural Engineering, John Wiley and Sons, Ltd., New York. |
25 | Sorace, S. and Terenzi, G. (2008), "Seismic protection of frame structures by fluid viscous damped braces", J. Struct. Eng., Am. Soc. Civil Eng., 134(1), 45-55. |
26 | Symans, M.D. and Constantinou, M.C. (1998), "Passive fluid viscous damping systems for seismic energy dissipation", J. Earthq. Technol., Special Issue on Passive Control of Struct., 35(4), 185-206. |
27 | Taylor, T.P. (2010), "Smart buildings and viscous dampers - a design engineer's perspective", Struct. Des. Tall Spec. Build., 19(4), 369-372. DOI ScienceOn |
28 | Tsai, C.X., Chen, K.C., Lin, S.B. and Ho, C.L. (2000), "Analytic model of fluid viscous damper under seismic loadings", J. Press. Vess-T. ASME, 402, 175-178. |
29 | Uang, C.M. and Bertero, V.V. (1988), Use of Energy as a Design Criterion in Earthquake-Resistant Design, Report No. UCB/EERC-88/18, University of California, Berkeley |
30 | Weng, D.G., He, H., Lu, X.L., Ding, J.M. and Wang, H.Q. (2009), "Structural analysis of the Shanghai World Expo 2010 Theme Hall with viscous damper bracings", China Civ. Eng. J., 42(12), 118-127. |
31 | Weng, D.G. and Lu, X.L. (2004), "Study on design parameters of energy dissipation structures with experiment verification", J. Earthq. Eng. Eng. Vib., 24(2), 150-157. |
32 | Weng, D.G., Zhang, C., Xia, J.D., Lu, X.L. and Zhang, S.M. (2012), "Experimental and numerical study on RC frame joint strengthened with enveloped steel plates", Proceeding of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September. |
33 | Weng, D.G., Zhang, C. and Lu, X.L. (2011), "Application of energy dissipation technology to C-category frame structure of school buildings for seismic retrofit of increasing precautionary intensity", Adv. Mater. Res., 163-167, 3480-3487. |
34 | Weng, D.G., Zhang, R.F., Zhang, S.M. and Lu, X.L. (2009), "Application of energy dissipation method based on seismic performance and demand for post-earthquake R.C. frame retrofit", Proceedings of the 11th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of tructures, Guangzhou, China, November. |
35 | Zeng, S. (2009), Application of Energy Dissipation Technology to Seismic Retrofit of Multi-storey RC Frame Damaged in Earthquake, Master Thesis, Tongji University, Shanghai. |