• 수산해양기술연구
• /
• 제51권2호
• /
• pp.257-264
• /
• 2015

This study is intended to provide navigator with specific information necessary to assist the avoidance of collision and the operation of ships to evaluate the maneuverability of dead weight tonnage 8,000 tons Oil/Chemical tanker. The actual maneuvering characteristics of ship can be adequately judged from the results of typical ship trials. Author carried out sea trials based full scale for turning test, Z" maneuvering test, man overboard rescue maneuver test, inertia stopping test. Consequently, $2^{st}$ Overshoot yaw angle of the semi balanced rudder and flap rudder in ${\pm}20^{\circ}$ zig-zag test showed $22.2^{\circ}$ and $18.0^{\circ}$, respectively. The maneuverability of the vessel was good in the flap rudder. The man overboard rescue maneuver maneuverability test was most favorable in the flap rudder and the full load condition. The results from tests could be compared directly with the standards of maneuverability of IMO and consequently the maneuvering qualities of the ship is full satisfied with its.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.142-149
• /
• 2009

본 논문은 단위 역률을 갖도록 직접 시비율 펄스폭 변조 방식으로 제어되는 3상 매트릭스 컨버터의 평형 및 불평형 부하시의 동작 특성을 고찰한다. 시스템의 해석으로부터 얻어진 중요하고 유용한 사실을 정리하면 다음과 같다. (1) 단위 역률 제어 알고리즘은 부하측의 변수에 의해서가 아니라 입력전압에 의하여 정해진다. (2) 평형 3상 부하가 리액티브 부하인 경우만 아니라면 입력측 역률을 1로 만들 수 있다. (3) 불평형 선형부하의 경우, 매트릭스 컨버터의 등가입력 특성은 비선형저항과 같다. (4) 입력 주파수와 출력 주파수가 특정한 관계를 가질 때, 입력측의 각상은 동일한 평균전력 분담률을 갖는다. 해석의 타당성과 유효성은 시뮬레이션과 실험결과를 통하여 검증하였다.

• 정보처리학회논문지C
• /
• 제9C권5호
• /
• pp.671-678
• /
• 2002

본 논문에서는 대규모 네트워크에서의 부하분산을 고려한 계층적 도메인간 QoS 라우팅을 제안하였다. 이를 위해 계층적 라우팅에서의 비용 산정 방식을 선계산 방식의 경로계산에서 제안하였고 선계산된 다중경로들 중에서 경로를 선택하는 방안을 제안하였다. 제안한 비용산정 방식은 도메인으로 분할된 대규모 네트워크의 QoS 라우팅에서 선계산 방식으로 경로를 설정하고, 이들 경로들의 예약 가능성을 높이기 위해 자원 예약 측면에서 가장 좋은 K개의 경로들을 부하분산을 고려하여 계산한다. 또한 이러한 다중 경로들 중에서 비용산정에 근거한 경로선택확률에 따라 경로를 선택하는 방안을 제안하였다. 그리고 제안한 QoS 라우팅 방식을 transit traffic과 intra traffic에 모두 적용하여 도메인간 라우팅과 도메인내 라우팅을 무리 없이 연계하면서 transit traffic을 우선으로 하는 방식을 제안하였다. 따라서 본 논문에서 제안한 부하분산 QoS 라우팅은 전체 네트워크 자원의 최적사용 뿐만 아니라 자원의 부하 분산을 가능하게 할 것으로 기대된다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (A)
• /
• pp.118-120
• /
• 2002

Ad-hoc 네트워크에서의 라우팅 프로토콜은 현재 사용중인 경로가 혼잡하다 하더라도 네트워크 토폴로지가 변하기 이전에는 새로운 경로를 설정하지 못하므로, 노드의 이동성이 낮은 환경에서는 트래픽의 집중 현상이 심화된다. 이동 기기들은 그 성능과 배터리에 한계가 있기 때문에 일부 소수 노드들에게 트래픽 집중되는 경우 다른 노드들에 대한 데이터 중계 서비스를 제공하는데 자신의 자원 대부분을 낭비하도록 강요받게 된다. 따라서 본 논문에서 혼잡 상태의 노드는 더 이상의 데이터 패킷 중계를 포기하고 이를 해당 소스에게 알림으로써 소스가 새로운 우회경로를 설정하도록 하여 트래픽의 집중 현상을 완화시키는 새로운 프로토콜인 SLAP(Simple Load-balanced Ad-hoc routing Protocol)을 제안한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.52-53
• /
• 2012

This paper presents a new control scheme for a three-phase split DC-link capacitor inverter as an AC power supplies. The proposed control method can maintain the balanced sinusoidal output voltage under unbalanced and nonlinear load conditions. The validity of the control method has been verified by simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.426-429
• /
• 1988

A simple design method of a single balanced MMIC mixer is described. It uses small signal S11 and capacitive load for the input matching circuit and the output loading circuit, respectively. It is found that the conversion gain of the FET mixer is independent of FET gate width. The fabricated mixer has 2.5 dB conversion gain at 9 GHz with 50 ohm IF load and 2 dBm local oscillator power.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.71-75
• /
• 1996

As the Three-level ZVS PWM DC-DC converter operates likewise full-bridge ZVS PWM DC-DC converter and the blocking voltage of each switching device is a half of the DC-link voltage, it is suitable for the high imput voltage applications. However, it has some problems as follows; The blocking voltage of each devices is unbalanced and it causes the power losses of the inner switching devices to be increased. Also, it has narrow load range so that the switching losses and the efficiency are reduced as it goes to the light load. This paper presents an nove Three-level ZVS PWM DC-DC converter, which can reduce the overvoltage of the outer switches, eliminate the unbalance of the voltage sharing between the switches at turn-off due to the stray inductances, and operate from no load to full load. The characteristics and the performances of the proposed Three-level ZVS PWM DC-DC converter are verified by simulation and experimental results

• 전기학회논문지P
• /
• 제54권1호
• /
• pp.47-53
• /
• 2005

Most of the loads in industrial power distribution systems are balanced and connected to three power systems. However, in the user power distribution systems, most of the loads are single & three phase and unbalanced, generating voltage unbalance. Voltage unbalance factor is mainly affected by load system rather than stable power system. Unbalanced voltage will draw a highly unbalanced current. As a result, the three-phase currents may differ considerably, thus resulting in an increased temperature rise in the machine. This paper presents a scheme on the characteristics of voltage and current unbalance factor under the load variation at the three phase 4-wire system. Load unbalance factor is measured by the power quality measurement apparatus and compared by the current unbalance factor. Two methods are indicated similar results. The voltage unbalance factor of the three-phase 4-wire system is approved by the field measurement. Each phase has an impedance each other by the unbalanced operation pattern and give rise to voltage unbalance.

• Journal of applied mathematics & informatics
• /
• 제14권1_2호
• /
• pp.343-351
• /
• 2004

In order to maintain load balancing in a distributed system, we should obtain workload information from all the nodes on network. This processing requires $O(v^2)$ communication overhead, where v is the number of nodes. In this paper, we present a new synchronous dynamic distributed load balancing algorithm on a (v, k ＋ 1, 1)-configured network applying a symmetric balanced incomplete block design, where $v\;=\;k^2$\;＋\;k\;＋\;1$. Our algorithm needs only $O(\sqrt[v]{v})$ communication overhead and each node receives workload information from all the nodes without redundancy. Therefore, load balancing is maintained since every link has the same amount of traffic for transferring workload information.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1360-1366
• /
• 2007

In this paper, the load balancing which is one of the distribution power system's operation purposes was studied. Reconfiguration of Distribution power system presents that the configuration is changed by changing the switch on/off status which exists in the system according to the mentioned purpose. Through this method, the load of distribution power system is shown to be balanced. As a characteristic of complicated distribution power system, system is designed by being applied by OOP(Object Oriented Programming) method which connected more flexibly than existing Procedural Programming method, and the process of calculating the distflow and the loss of configurated system is shown. In addition, this paper suggests more efficient method compared by the results of reconfiguration on the purpose of the loss minimization and by the result of distribution power system reconfiguration on the purpose of load balancing. Moreover, it searches for the method to approach the global optimal solution more quickly.