• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.466-473
• /
• 1998

LRV(Light Rail Vehicle) is one of the most useful way for urban transit. HDPIC has designed and manufactured the LRV train set for Manila Line 1 expansion. The LRV is composed of two carbody sections which are coupled by a articulated bogie. The articulated bogie and two motorized bogies have slewing rings in order to improve the curving performance and ride quality. Carbody structures are mainly made of low-carbon stainless steel (STS301L), and the carbody bolsters and draft sills are made of rolled steel for welded structures. The authority's specifications specified the design load conditions and weight limits. Design load conditions are vertical load, compressive load and diagonal jacking, and the maximum axle load is 10.7 ton. In order to meet those requirements, the stiffness and strength of carbody structure were predicted using finite element analysis during design stage. The half or full structure is modeled and analyzed with design load conditions, and critical areas are analysed in detail using sub-modeling method. The strength and strength of carbody structure was also verified by the load test. The analysis and test results show a good agreement.

• 산업기술연구
• /
• 제27권A호
• /
• pp.163-168
• /
• 2007

For an accurate computer simulation to motor drive systems, the target mechanical load system driven by a motor needs to be model its characteristics accurately. In general, a load system is modeled simply with system parameters such as approximated system inertia and friction. So, simulation results have some errors compared with experimental results for a real load system. RecurDyn is a mechanics simulation program for 3-dimension analysis to mechanical load systems. From this program, parameters such as a load torque, a system inertia and a viscous friction can be obtained accurately which are required to model a mechanical system. Also, this program operates together Matlab/Simulink which is used to simulate electrical motor drive systems. So, an accurate simulation for the whole system with a motor drive system and a mechanical load is possible. This paper introduces an application of RecurDyn program to an electric forklift drive system using IPMSM(Interior Permanent Magnet Synchronous Motor) and examines the feasibility of co-simulation it with Matlab/Simulink.

• 한국농공학회논문집
• /
• 제57권2호
• /
• pp.27-36
• /
• 2015

The objective of this paper was to quantitatively analyze the effect of concentrated animal feeding operations (CAFO) NPS pollution on a small watershed water quality. Monitoring was conducted from March to October, 2013. Monthly flow rate and selected water quality at each monitoring site were measured during dry days. Rainy day monitoring also was conducted. Modeling was conducted to evaluate the effect of CAFO NPS pollution on the water quality at the watershed outlet. The highest and mean concentration of selected water quality indices during rainy days were higher than those in dry days in general. The highest TN concentration measured at the CAFP pollution discharge point was 237.831 mg/L. The results revealed that the CAFO NPS pollution sources could be equally blamed for the water quality degradation of the stream. However, the effect of the NPS pollution from CAFOs seemed not to be very influential to the watershed water quality at the outlet. SWAT modeling revealed that the TN load was reduced by 18.95 %, 23.39 % and 30.53 % at the watershed outlet if the TN load at the CAFO NPS pollution discharge point reduced by 20 %, 40 % and 60 %, respectively. It was thought that the natural attenuation processes played an important role. The modeling was based only on the assumption of the load reduction and not verified by the monitored data. Therefore, it was suggested that a long term monitoring studies for the evaluation of the impact of CAFO NPS pollution on the watershed water quality be conducted.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.625-638
• /
• 2016

This paper presents field study and numerical modeling results for a single-cell low-fill concrete box culvert under a flexible pavement subjected to traffic loading. The culvert in the field test was instrumented with displacement transducers to capture the deformations resulting from different combinations of static and traffic loads. A low-boy truck with a known axle configuration and loads was used to apply seven static load combinations and traffic loads at different speeds. Deflections under the culvert roof were measured during loading. Soil and pavement samples were obtained by drilling operation on the test site. The properties of the soil and pavement layers were determined in the laboratory. A 3-D numerical model of the culvert was developed using a finite difference program FLAC3D. Linear elastic models were used for the pavement layers and soil. The numerical results with the material properties determined in the laboratory were compared with the field test results. The observed deflections in the field test were generally smaller under moving loads than static loads. The maximum deflections measured during the static and traffic loads were 0.6 mm and 0.41 mm respectively. The deflections computed by the numerical method were in good agreement with those observed in the field test. The deflection profiles obtained from the field test and the numerical simulation suggest that the traffic load acted more like a concentrated load distributed over a limited area on the culvert. Elastic models for culverts, pavement layers, and surrounding soil are appropriate for numerical modeling of box culverts under loading for load rating purposes.

• 한국전산구조공학회논문집
• /
• 제32권6호
• /
• pp.341-348
• /
• 2019

본 연구의 목적은 개폐식 대공간 구조물의 풍하중 산정 및 구조해석의 과정을 자동으로 수행하는 컴포넌트를 개발하는 것이다. 설계한 파라메트릭 모델링을 StrAuto를 통해 구조해석 자동화단계를 거쳐 구조해석용 모델로 변환하는 과정을 실시간으로 연동하여 구조해석 결과를 자동으로 도출하는 과정으로부터 본 연구에서는 추가로 구조물의 풍하중을 형상에 따라 상세히 할당하는 기능을 개발하였다. 이와 같은 과정을 통해 풍하중에 대한 최적화를 수행하여, 기존 설계된 구조의 물량을 줄이고, 구조적 안정성은 유지하는 방향으로 결론을 도출하였다. 추후에는 본 예제 모델을 통해 진동제어 최적화를 위한 제진장치 설치위치의 자동탐색이 가능하게 되는 연구를 진행할 계획이다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 연료전지심포지움 2002논문집
• /
• pp.151-156
• /
• 2002

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.31-37
• /
• 2001

In this paper, we developed an automated program for the modeling and simulation of three-dimensional roller gear cam mechanisms. The three-dimensional modeling for a roller-gear cam employs coordinate transformations based on the con-tact condition. the wire frame modeling followed by the shading technique using triangular meshing elements incorporat-ed the to reduce the number of data and computational load. Computer simulations for two kinds of products for rollger-gear cam mechansim illustrate the relative motion between the modeled roller-gear cam and a turret and thus show the effectiveness of the proposed modeling.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.119-131
• /
• 2011

To be integrated into the IEC 61970-based K-Grid, application of open communication protocol and sub-system modeling to major nodes is needed. In this paper, a module which links load nodes in customers to CIM based on psXML/oBIX, one of open protocols, was developed and data modeling and communication protocols of IEC 61850-7-42 based DER and ESS which apply the module to the customers who have DER and ESS were designed. Also the XML-based distributed database middleware was designed. The proposed modeling and protocols were applied to the building in which commercial DER products and the effectiveness of the proposed data modeling and the communication protocol were evaluated.

• Computers and Concrete
• /
• 제1권3호
• /
• pp.355-369
• /
• 2004

This paper presents a study of four finite element techniques that can be used to model slabon-beam highway bridges. The feasibility and correctness of each modeling technique are examined by applying them to a prestressed concrete I-beam bridge and a prestressed concrete box-beam bridge. Other issues related to bridge modeling such as torsional constant, support conditions, and quality control check are studied in detail and discussed in the paper. It is found that, under truck loading, the bending stress distribution in a beam section depends on the modeling technique being utilized. It is observed that the behavior of the bridge superstructure can be better represented when accounting for composite behavior between the supporting beams and slab.

• Computers and Concrete
• /
• 제33권6호
• /
• pp.725-738
• /
• 2024

This study presents a macro-modeling procedure for nonlinear finite element analysis of reinforced and prestressed concrete panels under blast loading. The analysis procedure treats cracked concrete as an orthotropic material based on a smeared rotating crack model within the context of total-load secant stiffness-based formulation. A direct time integration method compatible with the analysis formulation is adapted to solve the dynamic equation of motion. Considerations are made to account for strain rate effects. The analysis procedure is verified by modeling 14 blast tests from various sources reported in the literature including a blast simulation contest. The analysis results are compared against those obtained from experiments, simplified single-degree-of-freedom (SDOF) methods, and sophisticated hydrocodes. It is demonstrated that the smeared crack macro-modeling approach is a viable alternative analysis procedure that gives more information about the structural behavior than SDOF methods, but does not require detailed micro-modeling and extensive material characterization typically needed with hydrocodes.