• 한국안전학회지
• /
• 제7권1호
• /
• pp.65-72
• /
• 1992

Objective of this research is to evaluate fracture behaviors of fresh-butt welded metal by the acoustic emission technique. The specimens used are medium carbon steel(SM45C), mild steel (SS41) and stainless steel(SUS304), which have different weldability. The similar welding and dissimilar welding processes are considered, in the former SM45C, SS41 and SUS304 are used, in the later the following metals are used SM45C and SS41, SM45C and SUS304 and SS41 and SUS304. The characteristics of fracture in weld metal are eshmated by the tension test with nominal speciemns, the fracture toughness test with compact tension specimens and fractography analysis. The results of tension test show for base metals and similar welding materials that the yield strength and ultimate strength of similar welding materials are increased, the elongation of those are decreased. The weldability of SUS304 is better than that of SM45C and SS41 In similar welding materials. Mechanical properties of dissimilar welding mateiiths we lower than those of similar welding materials. In dissimilar welding materials, the weldability of SM45C and SUS304 is better than that of SM45C and SS41, and also weidability of SS41 and SUS304 is better than SS41 and SM45C. Comparing mechanical properties with AE counts, it is found that AE conuts appeared on a small before the limit load of elasticity(P$_{e}$), and apper greatly near yield strength region in tension test. These results could contribute to the safety analyses and the evaluation of strength for welding structure.e.

• 한국통신학회논문지
• /
• 제37권6C호
• /
• pp.483-491
• /
• 2012

자동차 간 (Vehicle-to-Vehicle) 통신에서, 각각의 자동차들은 위치, 속도, 조향 등의 정보를 포함하는 비컨 메시지를 주변의 자동차들에게 주기적으로 방송함으로써, 이들로 하여금 자신의 주행 정보를 인지할 수 있도록 한다. 그런데, 단순한 비컨 메시지의 방송은 메시지 수신 확률을 감소시키고 지연 시간을 크게 증가시키는 원인이 된다. 따라서, 본 논문에서는 비컨주기 (Beacon Period), 반송파감지거리 (Carrier-Sensing Range), 그리고 IEEE 802.11 DCF 졍쟁구간크기 (Contention Window Size)가 자동차 간 통신의 성능에 미치는 영향을 수학적으로 분석하고자 한다. 우선, 측위 오차의 임계값으로부터 자동차 운전 속도에 반비례하는 비컨주기를 도출하고, 이를 기반으로 비컨 메시지로 인한 DSRC 채널의 최대 부하를 수학적으로 유도한다. 비컨 메시지의 부하가 특정 임계치 이하가 되도록 반송파감지거리를 결정하는 수학적 모형을 유도하고, 수율을 최대화하는 DCF 경쟁구간크기에 대한 닫힌 근사해를 제시한다.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• 대한조선학회지
• /
• 제9권2호
• /
• pp.43-48
• /
• 1972

Inertia friction welding, a relatively recent innovation in the art of joining materials, is a forge-welding process that releases kinetic energy stored in the flywheel as frictional heat when two parts are rubbed together under the right conditions. In a comparatively short time, the process has become a reliable method for joining ferrous, and dissimilar metals. The process is based on thrusting one part, attached to a flywheel and rotating at a relatively high speed, against a stationary part. The contacting surfaces, heated to plastic temperatures, are forged together to produce a reliable, high-strength weld. Welds are made with little or no workpiece preparation and without filler metal or fluxes. However, In order to obtain a good weld, the determination of the optimum weld parameters is an important problem. Especially, because the amount of the flywheel mass will be determined according to the initial rotating velocity values at the constant thrust load, the initial rotating velocity is an important factor to affect a weld character of the inertia-welded IN713C-SAE8630, which is used for the wheel-shafts of turbine rotors or turbochargers, exhausting valves, etc. In this paper, the effects of initial rotational velocity on a weld character of inertia-welded IN713C-SAE8630 was studied through considerations of weld parameters determination, micro-structural observations and tensile tests. The results are as the following: 1) As initial rotating velocity was reduced to 267 FPM, cracks and carbide stringers were completely eliminated in the micro-structure of welded zone. 2) As initial rotating velocity was reduced and flywheel mass was increased correspondingly, the maximum welding temperatures were decreased and the plastic working in the weld zone was increased. 3) As initial rotating velocity was progressively decreased and carbides were decreased, the tensile strengths were increased. 4) And also the fracture location moved out of the weld zone and the tensile tests produced, the failures only in the cast superalloy IN713C which do not extend into the weld area. 5) The proper initial rotating velocity could be determined as about 250 thru 350 FPM for the better weld character.

• 동서간호학연구지
• /
• 제19권2호
• /
• pp.168-176
• /
• 2013

Purpose: This study was aimed to explore turnover intention of novice nurses. Methods: This study was an exploratory survey including quantitative and qualitative components. Qualitative data were obtained from an open survey question in the survey and analyzed using the method of content analysis. The data were collected from 245 nurses with less than three years experience at six general hospitals. Results: The early stage nurses scored an average of 14.5 (${\pm}3.31$) in turnover intention. Fourteen themes were identified in turnover intention experiences of early stage nurses, and each theme was divided into five categories: interpersonal relationship stress (33.7%), being regretful for choosing a nursing career (21.6), A feeling of low competency for direct nursing care (19.8), dissatisfaction with the welfare of the hospital (13.0), Increased extra-work burden (11.9). The participants requested for improvement in the following conditions to continue a nursing career descending order in priority: wage ($3.6{\pm}1.50$), work load ($3.0{\pm}1.83$), work environment ($2.8{\pm}1.63$), welfare facilities ($1.4{\pm}1.53$), the status of nurse ($1.2{\pm}1.57$), etc. Conclusion: These findings are helpful for the development of intervention strategies to decrease turnover intention of early stage nurses.

• 정보교육학회논문지
• /
• 제13권1호
• /
• pp.60-68
• /
• 2009

맞벌이 가정의 증가로 학부모는 교사와의 의사소통에서 시간 공간적으로 자유롭지 못하며, 교사도 학급당 많은 인원수와 업무과중 등으로 학부모와 의사소통이 잘 이루어지지 못하고 있다. 이러한 상황을 극복할 수 있는 수단으로서 SMS를 활용한 교사와 학부모의 의사소통 실태를 분석하고 해결해야 할 과제를 알아보았다. SMS 활용 실태에서 아동에 대한 정보 교류 및 교육 활동을 위해 SMS가 필요하다는 대답이 높았으며, 교사는 아동에 대한 교육 정보 교류를, 학부모는 생활 태도 향상에 효과가 있음을 지적하였다. 분석 결과를 바탕으로 담임에 대한 부담 해결, 담임과의 친숙함 형성, SMS 무반응 이유 탐색 및 대처 방안 마련, 학부모 요구에 맞는 정보 제공하기, 학부모의 답장률 높이기, 문자 용량 확대, 컴퓨터 온라인 접속 문제 등이 해결해야 할 과제로 파악되었다.

• 문화기술의 융합
• /
• 제4권1호
• /
• pp.307-314
• /
• 2018

2016, 2017년 연속으로 발생한 경주지진과 포항지진으로 인해 한국사회가 더 이상 지진에 대해 안전하지 않다는 점이 명백해졌다. 불행히도 한국의 건축 산업은 이제까지 지진에 대한 대비가 매우 미흡하여 많은 건물이 지진으로 인해 피해를 입었으며 다음과 같은 문제점이 존재한다. 첫째, 내진성능 확보 비율이 낮다. 둘째, 지진과 화재에 매우 취약한 필로티 구조 건물의 비중이 최근에 매우 높아졌다. 셋째, 안전성 확보를 위한 건축법 적용에서 제외되는 소규모 건축물의 비중이 너무 높다. 넷째, 관행화된 부패와 부실시공이 안전성을 저해한다. 따라서 이러한 상황에서 지진재난 대비를 위한 조치는 다음과 같다. 첫째, 지진에 취약한 건축물의 부족한 내진성능을 확보하기 위해 건물의 구조체를 보강하는 방법과 건물에 작용하는 지진하중을 경감시키는 방법을 활용한다. 둘째, 부패로 인한 부실시공을 방지하기 위해 내부고발자를 활용하고 적극적으로 보호한다. 이를 위해 내부고발자를 조직에 대한 배신자가 아니라 안전이라는 공익을 보호하기 위한 적극적 수단으로 인식해야 한다.

• 건축역사연구
• /
• 제29권1호
• /
• pp.21-37
• /
• 2020

The purpose of this paper is to reconstruct the original floor plan and wall design of Seokbulsa Grotto in Kyungju; commonly known as 'Seokguram'. The paper presents an array of dimensional studies of the existing Seokguram to examine its architectural form, and infers the original floor plan and wall design of Seokbulsa Grotto. Seokbulsa Grotto is designed as a system of 'coherent modules' and was constructed using the dry stone method, which interlocks large stone modules into a whole that becomes the load-bearing structure itself. The design principles governing Seokbulsa Grotto are the spatial axis of symmetry, modular coordination, and the layout grid of a quarter Tang-Ruler(TR: 唐尺). Dimensional studies were conducted with these governing principles in mind and concludes the following about the original floor plan design. In the main chamber, Ansang-stone's radius is 12 TR, and Flagstone's radius is 12¼ TR. In the front chamber, the width between the two Ansang-stones facing each other is 22 TR and the longitudinal space depth is 12 TR, while the width between the two Flagstones facing each other is 22½ TR and Flagstone's depth is 12 TR. In the passageway, the width between the two Ansang-stones facing each other is 11½ TR and longitudinal space depth is 9 TR, while the width between the two Flagstones facing each other is 12 TR and Flagstone's depth is 7¾ TR. The distance from the center to the entrance line of the main chamber is 10½ TR. Therefore, the total longitudinal length of the Grotto is 43½ TR at the level of the Ansang-stones, and 44 TR at the level of the Flagstones.

• The Journal of Advanced Prosthodontics
• /
• 제8권1호
• /
• pp.30-36
• /
• 2016

PURPOSE. The aim of this study was to evaluate the fracture resistance and fracture behavior of monolithic zirconia crowns in accordance with the preparation design and aging simulation method. MATERIALS AND METHODS. An upper first molar was prepared sequentially with three different preparation designs: shoulderless preparation, 0.4 mm chamfer and 0.8 mm chamfer preparation. For each preparation design, 30 monolithic zirconia crowns were fabricated. After cementation on Cr-Co alloy dies, the following artificial aging procedures were performed: (1) thermal cycling and mechanical loading (TCML): 5000 cycles of thermal cycling $5^{\circ}C-55^{\circ}C$ and chewing simulation (1,200,000 cycles, 50 N); (2) Low Temperature Degradation simulation (LTD): autoclave treatment at $137^{\circ}C$, 2 bar for 3 hours and chewing simulation; and (3) no pre-treatment (control group). After artificial aging, the crowns were loaded until fracture. RESULTS. The mean values of fracture resistance varied between 3414 N (LTD; 0.8 mm chamfer preparation) and 5712 N (control group; shoulderless preparation). Two-way ANOVA analysis showed a significantly higher fracture loads for the shoulderless preparation, whereas no difference was found between the chamfer preparations. In contrast to TCML, after LTD simulation the fracture strength of monolithic zirconia crowns decreased significantly. CONCLUSION. The monolithic crowns tested in this study showed generally high fracture load values. Preparation design and LTD simulation had a significant influence on the fracture strength of monolithic zirconia crowns.

• 한국음향학회지
• /
• 제39권4호
• /
• pp.342-350
• /
• 2020

본 논문은 우주 발사체 구조 개발을 위한 음향/진동 연구의 개요와 음향 해석 및 시험 기술의 국내 현황을 소개하고 있다. 먼저 발사체 운용중에 받는 동하중에 대하여 요약, 정리하고 위성체를 보호하기 위한 페이로드 페어링의 음향 하중 저감 설계 및 해석 방법을 소개하였다. 나로호부터 현재 한국형발사체 페이로드 페어링까지 음향 보호 시스템의 최적 설계를 위해 구조 진동-음향 연성 해석 성능의 향상을 도모하였으며, 이를 위한 연구 활동을 살펴보았다. 구체적으로 적층 구조가 다른 복합재료 실린더에 대한 음향 하중 저감 성능 해석 및 검증 시험, 음향 공명기 배열을 적용하기 위한 인클로저 음향 시험, 나로호 페어링 실린더부에 대한 음향 가진 시험 및 해석 등의 결과를 소개하였다. 현재 개발중인 한국형 발사체(누리호)의 페이로드 페어링 음향 하중 저감 해석 및 시험 결과를 소개하였으며 해석 결과가 실험 결과를 잘 예측함을 보였다.