• 제목/요약/키워드: load coefficient

검색결과 1,577건 처리시간 0.032초

친환경 혼합토의 현장적용성 평가 (Field Appliciability Evaluation of Eco-friendly Mixed Soil)

  • 박경식;오세욱;배우석
    • 한국지반환경공학회 논문집
    • /
    • 제15권2호
    • /
    • pp.17-25
    • /
    • 2014
  • 본 연구에서는 토양안정재(SS)를 이용한 흙 포장재의 공학적 특성을 평가하기 위해 일축압축시험과 현장적용성시험을 SS의 혼합비, 원지반 종류, 양생기간에 따라 수행하고 강도 및 변형특성을 분석하였다. 실험결과 SS 혼합토의 경우 양생 초기의 강도발현이 빠르고 28일 강도가 최종강도의 97% 이상을 확보하는 것으로 나타났으며, 세립질의 준설점토(DC) 및 유기질토(OS) 보다 조립질의 준설모래(DS)와 화강풍화토(WGS)가 일축압축강도에 대한 변형계수의 비가 큰 것으로 나타났다. 또한 자연건조와 강제건조의 조건으로 비교시험을 수행한 결과 54~67%의 강도 저하를 확인하였으며, 동결융해시험 결과에서는 55~63%의 강도 저하가 발생하였다. 그리고 반복재하시험 결과, 준설모래의 경우 최대 10,000회의 재하에서 초기강도의 35%까지 강도 저하가 발생하여 반복재하에 대한 저항능력의 확보를 위해서는 적당량의 세립분이 필요함을 확인하였다.

Speed-Power Performance Analysis of an Existing 8,600 TEU Container Ship using SPA(Ship Performance Analysis) Program and Discussion on Wind-Resistance Coefficients

  • Shin, Myung-Soo;Ki, Min Suk;Park, Beom Jin;Lee, Gyeong Joong;Lee, Yeong Yeon;Kim, Yeongseon;Lee, Sang Bong
    • 한국해양공학회지
    • /
    • 제34권5호
    • /
    • pp.294-303
    • /
    • 2020
  • This study discusses data collection, calculation of wind and wave-induced resistance, and speed-power analysis of an 8,600 TEU container ship. Data acquisition system of the ship operator was improved to obtain the data necessary for the analysis, which was accomplished using SPA (Ship Performance Analysis, Park et al., 2019) in conformation with ISO15016:2015. From a previous operation profile of the container, the standard operating conditions of mean draft were 12.5 m and 13.6 m, which were defined with the mean stowage configuration of each condition. Model tests, including the load-variation test, were conducted to validate new ship performance and for the speed-power analysis. The major part of the added resistance of container ship is due to the wind. To check the reliability of wind-resistance calculation results, the resistance coefficients, added resistance, and speed-power analysis results using the Fujiwara regression formula (ISO15016:2015) and Computational fluid dynamics (Ryu et al., 2016; Jeon et al., 2017) analysis were compared. Wind speed and direction measured using an anemometer were used for wind-resistance calculation and the wave resistance was calculated using the wave-height and direction-data from weather information. Also, measured water temperature was used to calculate the increase in resistance owing to the deviation in water density. As a result, the SPA analysis using measured data and weather information was proved to be valid and able to identify the ship's resistance propulsion performance. Even with little difference in the air-resistance coefficient value, both methods provide sufficient accuracy for speed-power analysis. The differences were unnoticeable when the speed-power analysis results using each method were compared. Also, speed-power analysis results of the 8,600 TEU container ship in two draft conditions show acceptable trends when compared with the model test results and are also able to show power increase owing to hull fouling and aging. Thus, results of speed-power analysis of the existing 8,600 TEU container ship using the SPA program appropriately exhibit the characteristics of speed-power performance in deal conditions.

횡방향 철근으로 구속된 철근콘크리트 기둥의 화재 노출조건에 따른 내화성능 (The Fire Resistant Performance of RC Column with Confined Lateral Reinforcement According to Fire Exposure Condition)

  • 최광호
    • 한국건설순환자원학회논문집
    • /
    • 제6권4호
    • /
    • pp.311-318
    • /
    • 2018
  • 이 연구에서는, 기둥 횡방향 철근의 화재 후 잔존 역학적 특성 규명 연구의 일환으로, 횡철근비와 기둥의 고온 노출면 수 차이에 따른 횡방향 철근의 손실강도 보상효과를 잔존 압축강도, 변형률 및 탄성계수와 하중-변위 곡선의 상대적 비교분석을 통해 규명하였다. 실험변수로 띠철근의 간격과 고온 노출면 수를 변수로 한 실험체를 제작하여 가열실험을 수행하였다. 이때 전기로 온도를 $400^{\circ}C$, $600^{\circ}C$$800^{\circ}C$로 설정하여 $13.33^{\circ}C$/분의 속도로 가열하고 2시간동안 그 온도를 유지시켰다. 냉각된 실험체에 대해 응력-변형률 곡선을 구하기 위한 압축실험을 수행하고, 이로부터 탄성계수, 잔존 내력 및 변형률 등의 잔존 역학적 특성을 분석하였다. 실험결과, 고온 노출 면이 많은 기둥이 수열온도 증가에 따라 탄성계수 감소율이 크게 나타나고, 횡철근비가 크면 수열온도 증가에 따라 탄성계수 감소율이 작게 나타났는데, 이로부터 기둥위치와 횡철근비 등이 내화설계나 화재 안전진단 시 고려되어 합리적인 내화성능 평가가 이루어져야 할 것으로 여겨진다.

새만금 간척지 첨단온실 에너지 설계를 위한 풍환경 및 온실 피복재의 영향 분석 (Analysis on Insulation of Wind Environment and Greenhouse Cover Materials Insulation for Advanced Greenhouse Energy Design in Saemangeum Reclaimed Land)

  • 서효재;서일환;노득하;이학성
    • 생물환경조절학회지
    • /
    • 제32권1호
    • /
    • pp.57-63
    • /
    • 2023
  • 본 연구에서는 새만금과 같은 간척지를 활용하여 대규모 첨단온실단지를 조성하는 경우 간척지의 환경적 특수성 중 높은 풍속에 따른 유리 단열재의 에너지 효율을 평가하였다. 현장에서 주로 사용되는 온실 단열재 중 4가지에 대한 평가 결과, 최대 37.4%의 에너지 차이를 보여, 온실 피복재의 선정이 중요함을 제시하였다. 이를 바탕으로 일반적인 내륙에서의 온실을 설계하는 것과 달리, 간척지에서는 내재해성 온실규격을 따라 시설을 설계하여야 하며, 에너지 소비량은 높아진 풍속과 재질을 고려하여 산정되어야 한다. 본 연구의 결과는 에너지 효율성을 온실 피복재의 종류와 풍속에 따라서 제시하고 있으며, 이는 대규모 첨단온실 조성 시 에너지 소비량을 예측하고, 이를 바탕으로 신재생에너지원을 포함하는 에너지 설계에 활용될 수 있다

Reliability of mortar filling layer void length in in-service ballastless track-bridge system of HSR

  • Binbin He;Sheng Wen;Yulin Feng;Lizhong Jiang;Wangbao Zhou
    • Steel and Composite Structures
    • /
    • 제47권1호
    • /
    • pp.91-102
    • /
    • 2023
  • To study the evaluation standard and control limit of mortar filling layer void length, in this paper, the train sub-model was developed by MATLAB and the track-bridge sub-model considering the mortar filling layer void was established by ANSYS. The two sub-models were assembled into a train-track-bridge coupling dynamic model through the wheel-rail contact relationship, and the validity was corroborated by the coupling dynamic model with the literature model. Considering the randomness of fastening stiffness, mortar elastic modulus, length of mortar filling layer void, and pier settlement, the test points were designed by the Box-Behnken method based on Design-Expert software. The coupled dynamic model was calculated, and the support vector regression (SVR) nonlinear mapping model of the wheel-rail system was established. The learning, prediction, and verification were carried out. Finally, the reliable probability of the amplification coefficient distribution of the response index of the train and structure in different ranges was obtained based on the SVR nonlinear mapping model and Latin hypercube sampling method. The limit of the length of the mortar filling layer void was, thus, obtained. The results show that the SVR nonlinear mapping model developed in this paper has a high fitting accuracy of 0.993, and the computational efficiency is significantly improved by 99.86%. It can be used to calculate the dynamic response of the wheel-rail system. The length of the mortar filling layer void significantly affects the wheel-rail vertical force, wheel weight load reduction ratio, rail vertical displacement, and track plate vertical displacement. The dynamic response of the track structure has a more significant effect on the limit value of the length of the mortar filling layer void than the dynamic response of the vehicle, and the rail vertical displacement is the most obvious. At 250 km/h - 350 km/h train running speed, the limit values of grade I, II, and III of the lengths of the mortar filling layer void are 3.932 m, 4.337 m, and 4.766 m, respectively. The results can provide some reference for the long-term service performance reliability of the ballastless track-bridge system of HRS.

온실 내외부 공기열의 선택적 축열에 의한 히트펌프 난방성능 개선 (Improvement of Heat Pump Heating Performance by Selective Heat Storage Using Air Heat of Inside and Outside Greenhouse)

  • 권진경;김승희;전종길;강연구;장갑열
    • 생물환경조절학회지
    • /
    • 제26권4호
    • /
    • pp.353-360
    • /
    • 2017
  • 본 연구에서는 장미 재배온실을 대상으로 온실 내부의 태양잉여열과 외부의 공기열을 선택적 열원으로 이용하여 온실난방용 온수를 생산할 수 있는 공기 대 물 히트펌프의 설계와 성능시험을 수행하였다. 태양잉여열 이용 축열운전과 외기열 이용 축열운전은 작물의 생육적온을 고려한 온실내부의 설정온도에 따라 자동전환 되도록 설계하였다. 제어반에 12개의 기준온도를 설정함으로써 축열운전 전환, 난방, 환기를 자동제어하며, 태양잉여열-외기열 선택적 축열운전에서 축열조의 온도는 축열능력과 난방부하에 대응하여 $35{\sim}52^{\circ}C$로 3단계 변온제어 하였다. 태양잉여열-외기열 선택적 축열에서 태양잉여열 이용 축열은 전체 시간의 23.1%, 외기열 이용 축열은 30.7%, 히트펌프 휴지시간은 46.2%를 차지하였으며, 난방성능계수는 태양잉여열 이용 축열 시 3.83, 외기열 이용 축열시 2.77, 전체 3.24로 평가되었다. 비교시험을 위해 축열조 온도를 $50{\sim}52^{\circ}C$로 항온제어 하는 조건에서 외기열 단독 이용 축열 시험을 수행하였으며 이때의 난방성능계수는 2.33으로 분석되었다. 결과적으로 공기 대 물 히트 펌프의 열원으로 온실내부 태양잉여열과 외부 공기열을 병용하고, 축열조 온도를 변온제어 한 결과 일반적인 외기열 이용 축열운전과 축열조 항온제어에 비해 난방성능 계수가 39% 향상됨을 확인하였다.

시화호 산업지역 강우유출수 내 중금속 유출특성 및 위해성 평가 (Characteristics and Risk Assessment of Heavy Metals in the Stormwater Runoffs from Industrial Region Discharged into Shihwa Lake)

  • 나공태;김종근;이정무;이승용;김은수;김경태
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제17권4호
    • /
    • pp.283-296
    • /
    • 2014
  • 본 연구에서는 연안오염총량관리가 시행되고 있는 시화호 유역에서 비점오염 형태로 유입되는 중금속 유출 특성, 오염도 및 위해성을 평가하기 위하여 반월 스마트 허브(산업단지)에 위치한 강우유출수 내 용존성과 입자성 중금속(Co, Ni, Cu, Zn, Cd 및 Pb)을 조사하였다. 용존성 Co와 Ni은 강우초반에 농도가 높고 이후 감소하는 경향을 보였으나, 나머지 용존성 중금속과 입자성 중금속은 강우량 증가에 따라 농도가 큰 폭으로 증가하는 경향을 보였다. 총 중금속 중 입자성 중금속이 차지하는 상대적인 비율은 Pb이 97.2%로 가장 높고 Cu>Cd>Co>Zn>Ni순이었으며, 입자-용존 분배계수($K_d$) 결과는 강우유출수 내 존재하는 Pb는 다른 중금속에 비해 빠르게 입자형태로 제거되는 것으로 나타났다. 본 연구를 통해 1일의 강우 이벤트 동안 2개의 토구를 통해 유출되는 총 중금속의 유출량은 Co 2.21 kg, Ni 30.5 kg, Cu 278.3 kg, Zn 398.3 kg, Cd 0.39 kg 및 Pb 40.0 kg로 나타났다. 연안오염총량관리제도가 시행되고 있는 시화호의 유역면적, 연간 강우량 등을 고려할 때 막대한 양의 중금속이 비점오염의 형태로 시화호로 유입되고 있음을 알 수 있었다. 무엇보다 강우유출수 내 용존성 Ni, Cu 및 Zn의 평균농도는 급성 독성을 나타내는 수질기준(급성 단기기준)를 초과하고 있으며, 입자성 중금속 역시 모든 원소가 배경농도에 비해 농축도(오염도)가 매우 높고, 국내 퇴적물 관리기준(PEL)을 큰 폭으로 초과하고 있어, 주변 해역 환경 및 생태계에 악영향을 미칠 것으로 판단된다.

직장인의 직무만족도 관련요인 분석 - NIOSH의 직무스트레스 모형을 적용하여 - (Factors Related with Job Satisfaction in Workers - Through the Application of NIOSH Job Stress Model -)

  • 김순례;이복임;이종은;이경용;정혜선
    • 지역사회간호학회지
    • /
    • 제14권2호
    • /
    • pp.190-199
    • /
    • 2003
  • This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

  • PDF

임진강 유역 오염물질 총량관리를 위한 유량-수질 자료의 통계분석 (Statistical Analysis of Water Flow and Water Quality Data in the Imjin River Basin for Total Pollutant Load Management)

  • 조용철;최현미;이영준;류인구;이명구;구동회;최경완;유순주
    • 환경영향평가
    • /
    • 제27권4호
    • /
    • pp.353-366
    • /
    • 2018
  • 본 연구의 목적은 임진강 수질오염총량관리제도를 위한 단위유역의 2012년 1월부터 2016년 12월까지 유량과 수질자료를 통계분석기법에 이용하여 수질특성을 평가하는 것이다. 유량과 수질은 평균 8일 간격으로 측정하였으며 11개 항목을 상관분석, 주성분 분석, 요인분석, 군집분석에 사용하였다. 군집분석의 결과 공간변화에 따라 자연형 하천, 도시형 하천, 점오염원 영향이 큰 지점 등으로 3개의 그룹으로 분류되었으며, 오염원의 종류와 수질 유사성이 군집 분류에 영향을 미치는 것으로 나타났다. 일원 분산분석과 사후검정을 이용하여 군집간의 평균사이에는 통계적으로 유의한 수준의 차이가 있는 것으로 나타났다. 상관분석에서 $COD_{Mn}$와 TOC의 상관계수가 0.951(p<0.01)로 상관성이 통계적으로 유의하게 높게 나타났다. 주성분 분석 결과 3개의 주성분으로 전체 수질특성의 72%를 설명할 수 있으며 요인분석에서 주요 요인은 EC, $BOD_5$, $COD_{Mn}$, TN, TP, TOC 항목으로 나타나 유기물과 영양염류 간접지표가 수질에 영향을 미치는 것으로 나타났다. 본 연구에서 요인점수를 다중 선형회귀분석에 적용하여 회귀 방정식을 제시하고 임진강 유역 수질관리에 유기물 및 영양염류 간접지표 항목의 관리가 중요하다고 판단된다.

식물공장형육묘시스템 내 광량에 따른 오이와 토마토 접수 및 대목의 증발산량 및 생육 변화 (Changes in Transpiration Rates and Growth of Cucumber and Tomato Scions and Rootstocks Grown Under Different Light Intensity Conditions in a Closed Transplant Production System)

  • 박선우;안세웅;곽유리나
    • 생물환경조절학회지
    • /
    • 제29권4호
    • /
    • pp.399-405
    • /
    • 2020
  • 최근 이상 기후 및 노동력 문제를 해결하기 위하여 재배 환경의 정밀 제어가 가능한 식물공장형육묘시스템을 이용한 균일한 묘소질의 접수 및 대목 생산과 접목 로봇의 작업성 향상을 연계시키는 규격묘 생산 자동화시스템 구축의 필요성이 증가하고 있다. 본 연구에서는 식물공장형육묘시스템에서 저면관수 시 오이와 토마토 접수 및 대목의 관수 시기 및 관수량 등 관수 계획 수립을 위해 광량에 따른 증발산량과 묘소질을 조사하였다. 저면 관수 시 연속 중량 측정이 가능하도록 행잉형 로드셀을 설치하고 육안으로 초기 위조가 시작되는 시점을 확인하여 관수 개시 시점을 배지수분함량 50% 이상으로 설정하였다. 오이 접수 및 대목의 관수 시기는 파종 후 7일 및 6일이었고, 토마토 접수 및 대목의 관수 시기는 강광(300 μmol·m-2·s-1) 처리구 기준으로, 파종 후 5, 8, 11, 13일이었다. 오이와 토마토 모두 광량 증가에 따라서 증발산 속도가 증가하였으며, 토마토에서 광량에 따른 증발산 속도 차이가 크게 나타났다. 오이와 토마토 묘의 생육은 광량이 증가할수록 촉진되었는데, 광량 증가는 하배축장의 신장을 억제시키고 경경을 증가시켰다. 오이 및 토마토 묘개체군의 누적 증발산량은 광량이 증가할수록 증가하였고, 개체당 일(24h) 증발산량과 광량은 1차 선형 형태로 높은 정의 상관관계를 보였다. 묘개체군의 연속 중량 측정을 통한 오이와 토마토 접수 및 대목의 증발산량 추정은 식물공장형육묘시스템의 정밀 관수 제어를 위한 관수 시기 및 관수량 결정을 위한 지표로 사용할 수 있을 것이다.