• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 춘계총회 및 학술발표회
• /
• pp.3-3
• /
• 2002

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 춘계총회 및 학술발표회
• /
• pp.3-3
• /
• 2003

• Bulletin of the Korean Chemical Society
• /
• 제18권2호
• /
• pp.224-226
• /
• 1997

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.285-287
• /
• 1995

• 한국전기전자재료학회논문지
• /
• 제11권9호
• /
• pp.727-732
• /
• 1998

Ag-deposited graphite powder was prepared by a chemical reduction method of metal particles onto graphite powder. X-ray diffraction observation of Ag-deposited graphite powder revealed that silver existed in a metallic state, but not in an oxidized one. From SEM measurement, ultrafine silver particles were highly dispersed on the surface of graphite particles. Cylindrical lithium ion secondary battery was manufactured using Ag-deposited graphite anodes and $LiCoO_2$ cathodes. The cycleability of lithium ion secondary battery using Ag-deposited graphite anodes was superior to that of original graphite powder. The improved cycleability may be due to both the reduction of electric resistance between electrodes and the highly durable Ag-graphite anode.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.612-617
• /
• 2021

In the case of a metal sulfide electrode, it is used as an anode or cathode active material in a lithium battery. The reason is that the voltage exists between 0.8 and 2.0 V via lithium electrode and the discharge and charge capacity is high. In order to manufacture nickel sulfide for electrode, which are widely used, nano-nickel powder was sulfided using ammonium polysulfide, and single-phase NiS electrodes were manufactured through heat treatment. The prepared NiS electrode had a high initial capacity of 500 mAh/g or more, and was stabilized after 20 cycles to maintain a capacity of 400 mAh/g or more until 100 cycles.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.45-50
• /
• 1995

In order to densify LAS(Lithuim Aluminosilicate)system compounds, we used metal alkoxides as precursors. Also Mg was added by sol-gel method using metal alkoxides to the LAS system for improving the sinterability, thermal and mechanical properties. The result was that the synthesizing temperature was lowered about 10$0^{\circ}C$, the sintering temperature was lowered by over 10$0^{\circ}C$ and MOR of samples from metal alkoxides was two times larger than that of sample form oxide.

• 자원리싸이클링
• /
• 제31권1호
• /
• pp.12-20
• /
• 2022

폐리튬이온전지를 용융환원시키면 구리, 코발트, 철, 망간, 니켈 및 규소를 함유한 금속합금을 얻는다. 금속합금의 황산침출용액에서 상기 금속을 분리하기 위한 공정을 개발하여 발표하였다. 이 공정에서는 철(III)과 구리(II)를 분리하기 위해 이온성액체를 사용하였다. 본 연구에서는 이온성액체를 대체하기 위해 D2EHPA와 Cyanex 301을 추출제로 사용했다. 철(III)과 구리(II)는 황산침출액으로부터 0.5 M의 D2EHPA에 의한 3단의 교차추출 및 0.3 M의 Cyanex 301로 분리하는 것이 가능했다. 유기상으로부터 철(III)과 구리(II)의 탈거는 각각 50%와 60%의 왕수로 가능했다. 연속실험의 물질수지로부터 금속의 회수율과 순도는 99%이상으로 확인되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.159-162
• /
• 1999

All solid state thin film micro-batteries consisting of lithium metal anode, an amorphous LiPON electrolyte and cathode of vanadium oxide have been fabricated and characterized, which were fabricated with cell structure of Li/LiPON/V$_2$O$\sub$5/Pt. The vanadium oxide thin films were formed by d.c. reactive sputtering on Pt current collector. After deposition of vanadium oxide films, in-situ growths of lithium phosphorus oxynitride film were conducted by r.f. sputtering of Li$_3$PO$_4$ target in mixture gas of N$_2$ and O$_2$. The pure metal lithium film was deposited by thermal evaporation on thin film LiPON electrolyte. The cell capacity was about 45${\mu}$Ah/$\textrm{cm}^2$ $\mu\textrm{m}$ after 200 cycle. No appreciable degradation of the cell capacity could be observed after 50 cycles .

• Composites Research
• /
• 제32권5호
• /
• pp.296-300
• /
• 2019

2D 전이금속 탄화물(MXenes) 가운데, 타이타늄 기반의 $Ti_3C_2$는 뛰어난 전기전도성과 전기화학적 특성 및 표면작용기의 영향으로 이차 전지와 슈퍼캐패시터와 같은 에너지저장장치의 유망한 전극 물질로 각광받고 있다. 전극으로서 $Ti_3C_2$의 사용은 이온이 반응할 수 있는 표면적을 넓혀줄 뿐만 아니라, 이온의 확산 거리를 줄여주고, 전하의 운동을 향상시켜준다. 이 연구에서, 효율적으로 MAX phase로부터 $Ti_3C_2$를 합성하는 방법을 통해 리튬이온배터리에서 MXene기반의 전극 물질을 위한 새로운 방향을 제시하고자 한다.