• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1186-1191
• /
• 1999

By using a liquid-mix precursor, we prepared the hollow glass spheres(HGS) as an additive of polymer compound which are used in the field of modifier, promoter, filler, and reinforcement. Liquid-mix precursor is a mixture of 40% sodium silicate aqueous solution, boric acid as a insolubilizing agent, and urea as a blowing agent. To obtain the precursor particles which are fed into a gas flame furnae, the above liquid-mix precursor was dried in oven and crushed with ball mill. We assumed the size of precursor particles ($53{\sim}63{\mu}m$, $63{\sim}180{\mu}m$), temperature of furnace($800{\sim}1200^{\circ}C$), and amount of urea(0~30 g) as the parameters affecting on the properties of HGS. As a result mean particle size of HGS increases with increasing the temperature of furnace and the amount of urea and with decreasing the size of precursor particles. Also, we found that incresing the amount of urea is related to a decrease of the crush strength of HGS.

• Composites Research
• /
• v.25 no.4
• /
• pp.93-97
• /
• 2012

Carbon nano fibers (CNFs) reinforced magnesium alloy (AZ91) matrix composites have been fabricated by liquid pressing process. In order to improve the dispersibility of CNFs and the wettability with magnesium alloy melt, CNFs were mixed with submicron sized SiC particles ($SiC_p$). Also, the mixture of CNFs and $SiC_p$ were coated with Ni by electroless plating. In liquid pressing process, AZ91 melts have been pressed hydrostatically and infiltrated into three reinforcement preforms of only CNFs, the mixture of CNFs and $SiC_p$ (CNF+$SiC_p$), and Ni coated CNFs and $SiC_p$ ((CNF+$SiC_p$)/Ni). Some CNFs agglomerates were observed in only CNFs reinforced composite. In cases of the composites reinforce with CNF+$SiC_p$ and (CNF+$SiC_p$)/Ni, CNFs were dispersed homogeneously in the matrix, which resulted in the improvement of mechanical properties. The compressive strengths of CNF+$SiC_p$ and (CNF+$SiC_p$)/Ni reinforced composites were 38% and 28% higher than that of only CNFs composite.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.77-80
• /
• 2018

Silver nanoparticles with various sizes were synthesized using ionic liquids. In order to conduct more efficient research, experimental methods and results were analyzed statistically. First, effects of five different parameters including the reaction time, temperature, NaOH concentration, reducing agent and ionic liquid amount on the size of silver particles were investigated. As a result, the effects of time and temperature were negligible. The experimental conditions for the other three factors were then statistically constructed. From XRD analyses, the particles synthesized under all conditions had a pure silver crystal structure. Sizes of the synthesized silver particles were also analyzed by HR-SEM. In the three synthetic conditions, NaOH concentration had the greatest influence on determining the size of silver particles and the reducing agent concentration was relatively minute. Synthesis conditions of silver particles with various sizes were presented by using statistical methods with respect to NaOH and ionic liquids. In addition, the sizes of silver particles according to three experimental conditions were derived by the mixture method.

• Journal of ILASS-Korea
• /
• v.10 no.1
• /
• pp.43-52
• /
• 2005

The effect of fuel injection spray on engine performance has been known as one of the major concerns for improving fuel economy and reducing emissions. In general, reducing the spray droplet size could prevent HC emission in gasoline engine. As far as PFI (Port Fuel Injection) gasoline engine is concerned, the mixture of air and fuel may not be uniform under a certain condition, because breakup and production of spray droplets are made in a short distance between the fuel injector and intake valve. This study, by constituting PFI gasoline spray system, was performed to study the transient spray characteristics and dynamic behavior of droplets from 2hole 2spray type injector used in DOHC gasoline engine. Mean droplet size and optical concentration in accordance with various conditions were measured by LDPA and CCD camera. Through this study, the variation of drop size and optical concentration could be used for understanding the behavior of unsteady spray was declared and the existing the small droplets between each pulse spray could be estimated caused to the development of wall film was conformed.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.758-763
• /
• 2001

This paper presents twin spray characteristics of two impinging F-O-O-F type injectors in which fuel and oxidizer impinge on each other to atomize under the various conditions. The droplet size and velocity in the impinging spray flow field were measured using a PDPA. The droplet size and velocity were investigated at mixture ratios of 1.5, 2.0, 2.47 and 3.0 for four injectors in which two single F-O-O-F injectors were arranged at intervals of 20.8, 31.2, 41.6 and 62.4mm respectively. In general, the arithmetic mean diameter, SMD and standard deviation of droplet size in the interaction area (X=0 and Y=0mm) were smaller. The axial velocity in the interaction area was slightly higher. Considering the behavior of impinged droplets using the We number calculated by using the axial velocity instead of the relative velocity in line C in Fig. 1(b) for four injectors, it is consumed that the We number over 500 had the possibility to disintegrate, and the We number below 500 had it to cohere after impingement of twin spray. The results of this study can be used for the design of a nozzle for liquid propellant rockets.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.19-23
• /
• 2019

A large grain YBCO bulk superconductor is fabricated by the top-seeded melt growth (TSMG) method. In the TSMG process, the seed crystal is placed on the top surface of a partially melted compact and therefore the seed crystal is frequently tilted during the melt process due to intrinsic unstable nature of Y211 particle +liquid phase mixture. In this work, we report the successful growth of single-domain YBCO bulk superconductors by a bottom-seeded melt growth (BSMG) method. Investigations on the trapped magnetic field and the microstructures of the synthesized specimens show that a bottom-seeded melt growth method has hardly affected on the crystal growth behavior, the microstructure development and the magnetic properties of the large grain YBCO bulk superconductors. The bottom-seeded melt growth method is clearly beneficial for the stable control of seed orientation through the melt process for the fabrication of a large grain YBCO bulk superconductor.

• Journal of ILASS-Korea
• /
• v.3 no.4
• /
• pp.8-15
• /
• 1998

The spray characteristics of emulsified fuel of W/O type has been experimentally investigated. The mixture of light oil and water by using ultrasonic energy adding system is used as the emulsified fuel. The SMD of sprayed droplet of emulsified fuel is measured by using the particle size analyzer. Major parameters of the present experimental study are the volume fraction of water in emulsified fuel, $0\sim30%$ by 5%, injection pressure, $10kg_f/cm^2\sim18kg_f/cm^2$ by $2kg_f/cm^2$, and the measurement distance, $10\sim100mm$, between injection nozzle tip and analyzer beam. Compared with light oil, the SMD of emulsified fuel is larger gradually by increasing the volume fraction of water in emulsified fuel, heightening injection pressure and increasing the spray distance. Also, In considering the fact that the pattern of drop size distribution of emulsified fuel is alike that of light oil, the real time spray in coincidence with making emulsified fuel by adding ultrasonic energy can stabilize spray pattern without modificating the injection system used by now.

• Korean Journal of Optics and Photonics
• /
• v.24 no.6
• /
• pp.338-341
• /
• 2013

Prothrombin Time (PT) is used as a measure of blood coagulation time. An optical analysis of the signal generating mechanism is described here for the reflection-type arrangement. Thromboplastin added into serum or whole blood initiates the coagulation process. We added a sufficient amount of magnetic particles into the sample before adding thromboplastin and subjected the mixture to a rotating magnetic field. The laser light gets reflected in a periodically modulated fashion with respect to the magnetic field rotation. Analysis of this decaying modulation could produce a reasonable coagulation time. We also introduce a simulation model to explain the signal generating mechanism using LightTools.$^{TM}$

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.135-139
• /
• 2011

In order to make high-purity ferro-manganese from $Mn_3O_4$ waste dust, the application of aluminothermite process to the reduction of the waste dust was investigated. The mixture from $Mn_3O_4$ dust as metallic source and Al metal powder as the reductant ignited, and reduced with an extremely intense exothermic reaction. The rapid propagation of the aluminothermite reaction occurred spontaneously and stably by ignition of the mixture. The Manganese having some alloy elements emerged as liquids due to the high temperatures reached up to about $2,500^{\circ}C$ and separated from the liquid by their differences of specific gravity. The result of thermite reaction showed the fact that can be obtained high purity ferro-manganese which have over about 90% of manganese content and lower impurities such as C, P, S than those of KS D3712 specification. The recovery of manganese from $Mn_3O_4$ dust was lower level of about 65% than about 75% from manganese ore by electric furnace process, that is due to spatter loss because of its extremely intense thermite reaction. But it will be improved by the process designed to provide CaO as the cooler or to use the Al metal powder having larger particle size distribution.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.40-45
• /
• 2010

Entrapment of hydrophobic flavonoid luteolin into ethosome was carried out for improving its stability and making practical application in the field of drug and cosmetics. The formation of liquid crystalline phase and its thermal properties were investigated by polarized optical microscopy and DSC. The phase inversion from W/O to W/O/W was detected by conductivity change with the addition of PBS buffer solution into the ethanol-dissolved lecithin mixture. The particle size change of ethosome with constituent composition was examined, which showed that the incorporation of luteolin into lecithin up to 10% had little effect on the size of ethosome. Enhancement of stability of luteolin by entrapment into ethosome was verified through DPPH test. The stabilization efficacy of ethosome was improved further by the addition of tocopherol.