• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.395-399
• /
• 2014

Operation characteristics of the sequencing batch reactor (SBR) process with electro-flotation (EF) as a solid liquid separation method (EF-SBR) were investigated. EF-SBR process showed excellent solid-liquid separation performance which enabled to separate biosolids from liquid phase within 30 min and to extend cyclic reaction time. Although influent organic loading rate was increased stepwise from 5 to 15 g COD/day, food to microorganisms (F/M) ratio could be maintained about 0.3 g COD/g VSS/day in EF-SBR because biomass concentration could be easily controlled at desired level by EF. However, it was impossible to increase biomass concentration at the same level in control SBR (C-SBR) process because solid-liquid separation by gravity settling showed a limitation at higher mixed liquor suspended solids (MLSS) concentration with 60 min of settling time. Total chemical oxygen demand (TCOD) removal efficiency of EF-SBR process was not decreased although influent organic loading rate became 3 times higher than initial value. However, it was seriously deteriorated in C-SBR process after increasing the rate over 10 g COD/day, which was accounted for insufficient organic removal by relatively higher food to microorganisms (F/M) ratio as well as biosolids wash-out by a limitation of gravity sedimentation.

• 식물조직배양학회지
• /
• 제26권4호
• /
• pp.223-227
• /
• 1999

본 연구는 글라디올러스 캘러스로부터의 재분화 조건을 구명함으로써 캘러스 배양시스템을 확립하는데 기여하고자 하였다. 글라디올러스 캘러스로부터의 유식물체 획득은 캘러스를 2,4-D 무첨가 1/2 MS고체배지에 치상한 후 24시간 일장하에서 15$^{\circ}C$로 배양하였을 때 효과적이었다. 캘러스로부터의 기관형성에 미치는 배양방법의 영향을 검토한 결과, 부정근의 형성은 액체진탕배양이 그리고 부정아의 형성은 액채정치배양이 각각 우수한 것으로 확인되었다. 본 실험의 결과를 통해 글라디올러스 ‘Topaz' 캘러스로부터의 재분화를 위한 최적 배양 조건을 선발하는 한편, 액체진탕배양법에 의해 기관-캘러스 혼합체를 유도할 수 있었으며, 이를 이용하여 기내 유식물체를 대량생산할 수 있는 가능성을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.3149-3151
• /
• 2011

• 에너지공학
• /
• 제11권2호
• /
• pp.99-105
• /
• 2002

A finite volume numerical approach is developed and used to simulate convection-dominated melting and solidification problems. The present approach is based on the enthalpy-porosity method that is traditionally used to track the motion of the liquid-solid front and to obtain the temperature and velocity profiles in the liquid-phase. The enthalpy-porosity model treats the solid-phase as the porosity in all computational cells that are located on the solid-liquid interfacial boundary. Concerning the computational cells that are fully located in the solid side of the interfacial boundary, the zero value of the porosity severely suppresses the velocity vector to practically a non-existent value that could be set equal to zero. A comparative analysis with the previous numerical approaches is performed to demonstrate the improved features of the presented model. Results of a melting and solidification experiments are also used to assess and evaluate the performance of the model.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.221-226
• /
• 2008

Numerical simulation is performed for microdroplet deposition on a pre-patterned micro-structure. The level-set method for tracking the liquid-gas interface is extended to treat the immersed (or irregular-shaped) solid surface. The no-slip condition at the fluid-solid interface as well as the matching conditions at the liquid-gas interface is accurately imposed by incorporating the ghost fluid approach based on a sharp-interface representation. The method is further extended to treat the contact angle condition at an immersed solid surface. The present computation of a patterning process using microdroplet ejection demonstrates that the multiphase characteristics between the liquid-gas-solid phases can be used to improve the patterning accuracy.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.221-226
• /
• 2008

Numerical simulation is performed for microdroplet deposition on a pre-patterned micro-structure. The level-set method for tracking the liquid-gas interface is extended to treat the immersed (or irregular-shaped) solid surface. The no-slip condition at the fluid-solid interface as well as the matching conditions at the liquid-gas interface is accurately imposed by incorporating the ghost fluid approach based on a sharp-interface representation. The method is further extended to treat the contact angle condition at an immersed solid surface. The present computation of a patterning process using microdroplet ejection demonstrates that the multiphase characteristics between the liquid-gas-solid phases can be used to improve the patterning accuracy.

• 분석과학
• /
• 제11권6호
• /
• pp.499-504
• /
• 1998

An analytical method for the simultaneous measurement of trace Cu, Sn, and Bi in sea water has been investigated by Inductively Coupled Plasma-Mass Spectrometry. Amberlite IRC-718 resin was used as a solid phase in solid-liquid extraction technique for the removal of matrix interferences such as Na, S, P, and other polyatomic ion species. Recoveries of 99.8% for Cu, 99.6% for Sn, and 97.9% for Bi were obtained for the standard spiked sample. The developed method was applied to analysis of trace metals in sea water.

• 대한화학회지
• /
• 제9권2호
• /
• pp.78-80
• /
• 1965

The organic yields(i.e., fraction of nuclear events resulting in organic compound formation) of the radioactive neutron capture reactions of the halogens in purified aromatic halides have been determined in the liquid and solid state, in the presence of scavenger, elemental halogen for thermal atoms, and in the presence of oxygen. Among the important results are; (1) organic yields of the halides are due in part to hot processes and in part to thermal processes; (2) temperature (from liquid state to solid state); (3) the organic yield of chlorobenzene is the same in the solid phase as in the liquid phase whereas the yields of the bromo-and iodobenzene are higher in the solid.

• 한국식품저장유통학회지
• /
• 제5권2호
• /
• pp.127-132
• /
• 1998

In order to fad out an efficient way of topdressing nitrogen fertilizer in mulch-cropping system of onion(Allium cepa L.), solid, slow-release, and liquid forms of nitrogen fertilizers were allied to cv. 'Changnyungdaego' various number of times at different time, with 5 topdress applications of solid fertilizer serving as a control. Whole basal application of conventional solid fertilizer and 2 slow-release fertilizers were labor-saving and showed improved storage quality of bulbs, but resulted in poor plant growth and considerably low yield due to fertilizer shortage from early April. This suggests that topdress application is necessary. Liquid form of nitrogen fertilizer was more effective for plant growth and yield and saving labor than the solid form. Early applications was effective for increasing yield and storage quality of onion bulbs harvested. Thus two applications of liquid form of nitrogen fertilizer in February and March at rome month interval are recommended in mulch crowing system of onion.

• 한국레이저가공학회지
• /
• 제11권1호
• /
• pp.12-18
• /
• 2008

Laser micromachining is a promising technique to fabricate the micro-scale devices. However, there remains important challenges to reducethe redeposition of ablated materials around the laser irradiated zone and to get a smooth surface, especially for metal and semiconductor materials. To achieve the high-quality micromachined devices, various methods have been developed. Liquid-assisted micromachining can be a good solution to overcome the previously mentioned problems. During the laser ablation process, the liquid around the solid sample dramatically changes the ablation characteristics, such as ablation rate, surface profile, formation of debris, and so on. In this investigation, we conducted the laser micromachining of Si in various liquid environmental conditions, such as liquid types, liquid thickness. In addition, using nanoscale time-resolved shadowgraphy technique, we observed the ablation process in liquid environments to understand the mechanism of liquid-assisted laser micromachining.