• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.733-738
• /
• 2006

As the film transistor-liquid crystal display (TFTLCD) panels become larger and provide higher resolution, the propagation delay of row and column lines, the voltage modulation of Vcom, and the response time of liquid crystal affect the display images now more than in the past. It is more important to understand the electrical characteristic of TFT-LCD panels these days. This paper describes the electrical model of a 15-inch XGA ($1024{\times}768$) TFT-LCD panel. The parasitic resistance and capacitance of its panel are obtained by 3D simulation of a sub pixel. The accuracy of these data is verified by the measured values in an actual panel [1]. The developed panel simulation platform, the equivalent circuit of a 15-inch XGA panel, is simulated by HSPICE. The results of simulation are compared with those of experiment, according to changing the width of signal. Especially, the proposed simulation platform for modeling TFTLCD panels can be applied to large size LCD TVs. It can help panel and circuit designers to verify their ideas without making actual panels and circuits.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.524-528
• /
• 2002

Conventional hybrid aligned nematic liquid crystal display (HAN-LCD) has several advantages on low operating voltage, fast response time and rubbing free on one substrate. We have fabricated a new hybrid aligned nematic display driven by fringe field. The new device exhibits much wider viewing: angle than that of the conventional HAN mode, owing to almost in-plane rotation of the LC director. Furthermore, we have developed the device that reveals more efficient electro-optic characteristics by placing common electrode on top and bottom substrates. In this paper, the electro-optic characteristics of the novel cell are investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1473-1475
• /
• 2006

The electro-optic properties of an active-matrix polymer network liquid crystal display (AM-PNLCD) with crossed polarizer films to improve its contrast ratio were evaluated. By using crossed polarizer films, it shows good contrast ratio as well as wide viewing angle and adequate response time at normal TFT-twisted nematic (TN) LCD driving voltage (2.8V).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.357-360
• /
• 2005

A novel wide viewing angle flexible liquid crystal display will be demonstrated. The crossed matrix-type micro-cell structure was adopted in this design. The LC domains were divided into four different tilted directions by the combination effect of pixel fringe field and crossed matrix type micro-cell. It can create four domains without rubbing process and form the cell gap without spacer. For flexible color fabrication, a novel inkjet printing technology is adopted. This cost effective wide viewing angle color flexible LCD technology can be a good solution for high performance flexible LCD.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.54-57
• /
• 2005

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field, in which the +LC (${\Delta}{\varepsilon}$=7.4, rubbing angle= $80^{\circ}$) is homogeneously aligned in the initial state. This device is a problem that the voltage-dependent transmittance and reflectance curves do not match each other. Thus a dual driving circuit is required. This study shows that optimization of the rubbing angle in the transmissive and reflective regions solves this problem so that the transflective display with a single cell gap and single gamma curve for reflective and transmissive region is possible.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.381-384
• /
• 2005

Driver IC is one of the key components on the LCD monitor and LCD/TV. The function of the driver IC is to transfer and forward the input signals to LCD panel module. Inside driver IC, there are several operating units which process the input signals and generate the appropriate size and resolution to the LCD panel module. LCD panel module will display these input signals. However, there are some difficulties which driver IC designer, LCD monitor and LCD/TV maker will face. Thus, this article addresses the function and difficulties on driver IC.

• 한국조명전기설비학회지:조명전기설비
• /
• 제18권4호
• /
• pp.47-53
• /
• 2004

미국, 일본 및 유럽을 중심으로 오랫동안 검토가 진행되어 왔던 HDTV(High Definition TV)가 2005년을 본격적인 상용화의 원년으로 하여 각국에서 많은 활동이 이루어지고 있다. HDTV 보급에 있어서, 핵심적인 부문을 차지하고 있는 Display는 지난 백 여년간 그 명맥을 유지하여 오던 CRT(Cathode Ray Tube)가 Display의 Size 및 해상도면에서 그 한계를 드러냄에 따라 그 퇴조를 선언하고, 대체 Device의 출현을 기대하고 있다. 특히 기술 개발의 중심이 되고 있는 플라즈마 디스플레이(PDP, Plasma Display) 및 LCD(Liquid Crystal Display)는 평판 디스플레이로서의 장점으로 차별화 되어 그 발전가능성에 많은 관심을 받고 있으며, 그로 인한 약진이 두각을 나타내고 있다. (중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.204-204
• /
• 2004

현재 정보통신의 강국으로 손꼽히고 있는 국내에서도 FPD(Flat Panel Display) 장치를 첨단산업 핵심 기술로 보고 기업 간에 치열한 기술경쟁을 벌이고 있는 실정이다. 현재 양산단계까지 접어든 TFT-LCD(Tin Film Transistor Liquid Crystal Display)와 PDP(Plasma Display Panel)는 경량화, 박형화 등의 장점으로 전자업계에서 최고의 캐시카우(Cash Cow)로 부각되고 있으며, 특히 소비자들의 대화면 선호도의 증가 추세에 힘입어 LCD보다는 콘트라스트 비(Contrast Ratio)와 시야각(View Angle) 측면에 있어 FPD 장치의 대면적화 관점에서 유리한 PDP가 다소 우위를 보이고 있는 추세이다.(중략)

• 상하수도학회지
• /
• 제24권4호
• /
• pp.369-376
• /
• 2010

The purpose of this study is to reprocess Waste-LCD(Liquid Crystal Display), to widely increase specific surface-area by foaming agent in the process of reprocessing and to use as a substrate of water treatment which is increased the ability of biological treatment, as well as to control non-point source pollutants produced by surface run off during rainfall with using this substrate, and to improve water quality of public watershed as developing substrate for water treatment to be able to purify second treated water which is exhausted at the wastewater treatment plant. The average removal efficiency of Waste-LCD that using the foaming technology was SS 71.2%, BOD 55.7%, COD 58.4%, T-N 29.5% and T-P was 50.3%. Almost Media, early stage showed low removal efficiency of SS and BOD. However, it became high when the microorganism adhered the Media. The variation of SS removal efficiency was high by inflow concentration of SS. The reason for the Media 4 showed high SS removal efficiency is that it has wide specific surface-area, and also it has a pore. All in all, it shows floating matter treatment ability not only inside but it also works outside of the substrate.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.72-80
• /
• 2001

본 논문에서는 ELA(excimer laser annealing) 및 SMC(silicide mediated crystallization) 공정으로 제작된 다결정 실리콘 TFT-LCD(Thin Film Transistor-Liquid Crystal Display) 화소의 전기적 특성을 Spice회로 시뮬레이션을 통해 비교 분석하였다. 복잡한 TFT-LCD 어레이 (array) 회로의 전기적 특성 분석을 위하여 GUI(Graphic User Interface) 방식으로 손쉽게 복잡한 회로를 구성할 수 있는 PSpice에 AIM-Spice의 다결정 실리콘 박막 트랜지스터 소자 모델을 이식하고, AIM-Spice의 변수 추출법을 개선 체계화하였으며 ELA 및 SMC공정으로 각기 제작된 다결정 실리콘 박막트랜지스터에 적용하여 단위 화소 및 라인 RC 지연을 고려한 화소 특성을 비교 분석하였다. 비교 결과 ELA 다결정 실리콘 박막 트랜지스터 소자가 SMC에 비해 TFT-LCD의 화소 충전 시간 및 킥백(kickback) 전압 특성이 모두 우수하게 나타남을 확인하였다.