• Membrane Journal
• /
• v.28 no.3
• /
• pp.214-219
• /
• 2018

In the present study, superflux nickel capillary supports for gas and vapor separation membranes were prepared by a combined process of NIPS and sintering. Nickel capillary precursors were prepared by NIPS process from PSf-Ni-DMAC-PEG400 dope solution and was sintered at various temperatures in $H_2$ atmosphere to reliably produce Ni capillary support. The optimized Ni capillary support has an outer and inner diameters of 722 and $550{\mu}m$, and its thickness was $94{\mu}m$. It has 3-dimensional pore channel network and its porosity and mean pore diameter was 26% and $4{\mu}m$, respectively. Also, its mechanical strength was tested in tensile mode: its fracture load was 2.84 kgf and the fracture elongation was 13%. Finally, its single gas permeance was measured: He, $N_2$, $O_2$, and $CO_2$ permeance was 432,327, 281,119, 264,259, and 193,143 GPU, respectively. The superflux behavior could be explained from viscous flow through the macropores having a diameter of $4{\mu}m$ and narrow thickness. It could be concluded that the superflux behavior of the Ni capillary support was from the 3-D pore channel network and the small thickness.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.519-525
• /
• 2008

Biodegradation of toluene, styrene and hydrogen sulfide as model compounds of volatile organic compounds and odor from waste gas was investigated experimentally in a biotrickling filter. This study focussed on the description of experimental results with regard to operating conditions. The effect of varying $H_2S$ load rate and inlet concentration was investigated under autotropic and mixotropic environmental conditions. The $H_2S$ removal efficiencies of greater than 99% were achieved at $H_2S$ loads below $10g/m^3{\cdot}hr$ for each environment. It was observed that the maximum elimination capacity of mixotrophic filter was achieved a little greater than the one of autotrophic filter. The biofiltration of toluene and styrene in trickling bed was examined under different gas flow rates, load rates, and inlet concentrations. Below $40g/m^3{\cdot}hr$ of toluene loading, the elimination capacity and loading were identical and it was completely destroyed. In high loading of toluene, the biotrickling filter was operated at its maximum elimination capacity. In the inlet concentration of 0.2, 0.5, and $1.0g/m^3$, the maximum elimination capacity of toluene showed 40, 45, and $60g/m^3{\cdot}hr$, respectively. After a short adaptation period, it was demonstrated that the results of styrene in originally toluene adapted bioreactor was similar with the ones of toluene. However, the performance of filer for styrene is generally a little lower than for toluene. The operating conditions (including liquid flow rate etc.) allowing the highest removal efficiency should be determined experimentally for each specific case.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.799-806
• /
• 1995

The steady shear and small amplitude oscillatory dynamic rheological properties of citrus pectin $([\eta]=3.75\;dL/g)$ were characterized for a wide range of pectin concentrations $({\sim}6%)$. The typical power-law flow was observed above 2.0% concentration, and the shear rate dependence of viscosity increased with pectin concentration. The transition from dilute to concentrated regime, determined from the double logarithmic plot of ${\eta_{sp.o}}\;vs\;C[\eta]$, occurred at a critical coil overlap parameter $C^{*}[\eta]\approx4.0$, at which ${\eta_{sp.o}}$ corresponded to approximately 10.0. The slopes of ${\eta_{sp.o}}\;vs\;C[\eta]$, at $C[\eta]\;at\;C[\eta]C^{*}[\eta]$were 1.1 and 4.5, respectively. The steady viscosity $(\eta)$ displayed a good superposition at ${\eta}/{\eta}_o\;vs\;{\gamma}/{\gamma}_{0.8}$ relation with an exception of high concentration (6%), which arised from the significant deviation of flow behavior index (n values of $\eta_{a}=K\gamma^{n-1}$) at high concentration. Dynamic measurements showed that the loss modulus $(G^{\prime\prime})$ was much higher than the storage modulus $(G^\prime)$for all concentrations studied, indicating predominant viscoelastic liquid-like behavior of pectin solutions. The frequency dependence of $G^\prime$ was higher than that of $G^\prime\prime$ at the same concentration, whose trend was more pronounced with decreasing pectin concentration. The shear viscosity $(\eta)$ was almost identical to the complex viscosity $(\eta^{*})$ at low concentration, following the Cox-Merz rule, but they became increasingly different at high concentration.

• KSBB Journal
• /
• v.24 no.4
• /
• pp.367-376
• /
• 2009

In this study, two supercritical extraction systems of different scale, analytical-scale and lab-scale, were employed to investigate the extraction efficiency of canola oil from canola seeds using supercritical carbon dioxide ($SCCO_2$) as an extraction solvent. The effects of various parameters such as extraction temperature ($40{\sim}80^{\circ}C$), pressure (200~500 bar), particle size, and $SCCO_2$ flow direction on the extraction rate and yield were examined in detail. Triglycerides and fatty acids in the extracted canola oil were analyzed quantitatively by high-performance liquid chromatography and gas chromatography. The solubility values of canola oil in $SCCO_2$ could be calculated from the experimental results. Similar extraction yields were obtained from both analytical-scale and lab-scale extraction systems. The extraction rates obtained under solvent ($SCCO_2$ ) upflow conditions were found to be higher than those of solvent downflow extraction. However, the effect of $SCCO_2$ flow direction on the extraction yield was observed to be relatively insignificant.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.3-10
• /
• 1998

Simulated waste liquid containing 50 ppm cobalt ion was treated by adsorbing colloidal flotation using Fe(III) or Al(IlI) as flocclant and a sodium lamyl sulfate as a collector. Parameters such as pH, surfactant concentration, Fe(III) or Al(III) concentration, gas flow rate, etc., W앙e considered. The flotation with Fe(III) showed 99.8% removal efficiency of cohalt on the conditions of initial cobalt ion concentration 50 ppm, pH 9.5, gas flow rate 70 ml/min, and flotation time 30 min. When the waste solution, was treated with 35% $H_2O_2$ prior to adsorbing colloidal flotation, the optimal pH for removing cobalt shifted m to weak alkaline range and flotation could be applied in wider range of pH as compared to non-use of $H_2O_2$. Additional use of 20 ppm Al(III) after precipitation of 50 ppm Co(II) with 50 ppm Fe(III) made the optimal pH range for preferable flotation w wider. Foreign ions such as, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$ were adopted and their effects were observed. Of which sulfate ion was f found to be detrimental to removal of cob퍼t ion by flotation. Coprecipitation of Co ion with Fe(III) and Al(III) resulted in b better removal efficiency of cobalt IOn 피 the presence of sulfate ion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.100-106
• /
• 2019

Ground and high altitude simulated combustion experiments were conducted using a liquid rocket engine with hydrogen peroxide and kerosene as the propellant. A ground and high altitude simulated combustion test facility was constructed by installing a high altitude model diffuser and TMS (Thrust Measuring System) on a vertical combustion test bench. The thrust characteristics according to altitude were investigated using the combustion test equipment. The diffuser was designed on a 1:4.8 scale to verify the characteristics of the high diffusing diffuser and starting pressure. The cold flow tests were conducted using nitrogen gas, and the performance characteristics and starting characteristics of the scale down diffuser were verified. A diffuser and TMS were installed on the vertical combustion test bench, and the thrust correction equations for the system resistance were derived. The thrust correction equations were derived from the step test and vacuum step test before the actual hot firing test. Nozzles with an operating altitude of 10km were designed. Hot firing tests were conducted to analyze the thrust characteristics according to the operating altitude changes. The actual thrust was calculated using each correction equation with the thrust value measured by the TMS.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.31-42
• /
• 2020

Horse fat is known to be an effective ingredient in Asia, and the horse fat itself, which is mixed with other ingredients at the additive level, is often sold as a finished product. In this case, physical properties of the horse fat raw material are important. Many horse fats produced in Korea (Jeju) have low temperature stability, so if not stored at low temperatures, segregation may occur. In the case of Japanese horse fat, it is partially hydrogenated or is used the solid phase as the horse fat by separating the liquid phase and the solid phase that is harder and more stable than the horse fat of Jeju. In this study, the physical properties were tested to improve the temperature stability even without the partial hydrogenation process of Jeju horse fat. Various oil gelling agents were used in the study. Results confirmed that the physical properties of the hydroxystearic acid added Jeju horse fat were improved. In addition, stability evaluations at temperatures of 25 ℃, 40 ℃, 45 ℃ and flow behavior evaluations at temperatures of 25 ℃, 30 ℃, 40 ℃ were performed for Jeju horse fat with hydroxystearic acid, 100% Jeju horse fat, and 100% Japanese horse fat. Results showed that the Jeju horse fat improved in flow behavior by adding hydroxystearic acid similar to that of Japanese horse fat. In addition, when the crystal state was observed under a microscope, the thermal stability was improved by decreasing the size of the needle-type crystals with the addition of hydroxystearic acid. Jeju horse fat containing hydroxystearic acid was found to have no physical problems even when stored at room temperature for a long time.

• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2008

In the process of continuous hot-dip galvanizing, it is well known that the gas wiping through an air knife system is most effective because of its uniformity in coating thickness, possibility of thin coating, workability in high speed, and simplicity of control. However, gas wiping used in the galvanizing process brings about a problem of splashing at the strip edge above a certain high speed of process. It is also known that the problem of edge splashing is more harmful than that at the mid strip surface. For a given liquid(of a certain viscosity and surface tension), the onset of splashing mainly depends upon the strip velocity, the gas-jet pressure, and the nozzle's stand-off distance. In these connections in the present study, we proposed three kinds of air knife system having nozzles of constant expansion rate, and compared the jet structures issuing from newly proposed nozzle systems with the result by a conventional one. In numerical analysis, the governing equations are consisted of two-dimensional time dependent Navier-Stokes equations, and the standard k-${\varepsilon}$ turbulence model is employed to solve turbulence stress and so on. As the result, it is found that we had better use the constant expansion-rate nozzle which can be interpreted from the point view of the energy saving for the same coating thickness. Also, we better reduce the size of separation bubble and enhance the cutting ability at the strip surface, by using an air-knife having constant expansion-rate nozzle.

• The Journal of Korean Medicine
• /
• v.25 no.4
• /
• pp.1-7
• /
• 2004

Objective : This study was designed to examine the effects of orally administered Prunus persica water extract (PPE), which is used as herbal medicine, for treatment of Yu Xue (stasis of blood) and tacrine on the basal concentration of extracellular acetylcholine in the hippocampus of rats. Methods: To investigate the effects of PPE and tacrine on concentration of extracellular acetylcholine in the hippocampus of rats, the microdialysis technique, under the same experimental conditions, was used. And we used male Wistar rats which were 7 weeks of age and 210-290 g. PPE was extracted with boiling water, and the rats were anesthetized with pentobarbital Na. Their skulls were exposed and a hole was drilled for implantation of a microdialysis probe. In order to increase the recovery of acetylcholine, a probe with a long membrane was used. One day after surgery, the microdialysis probe was perfused with Ringer's solution at a flow rate of 1.5 l/min. The acetylcholine concentration in dialysis samples was measured by high-performance liquid chromatography (HPLC) with electrochemical detection. AChE activity was measured using the radiometric method, as described by Sherman. Results : The comparative effects of PPE and tacrine on hippocampal extracellular acetylcholine concentration was that these cholinesterase inhibitors produced dose-dependent increases in the extracellular acetylcholine concentration. And the effect of PPE and tacrine on rat brain AChE activity was that PPE produced maximal inhibition at 1 h after administration, when AChE activity was 44% of the intact level. AChE activity gradually recovered thereafter, and reached 78% of the intact level at 12 h after administration. Conclusion : In this study, PPE has a potent activity and a long-lasting effect on the central cholinergic system, in terms of the basal concentration of extracellular acetylcholine in the hippocampus and the AChE activity in the brain of rats. And oral administration of PPE increased dose-dependently the basal concentration of extracellular acetylcholine in the hippocampus of rats. PPE may be one of the more useful cholinesterase inhibitors for the treatment of Alzheimer's disease.

• Journal of Sasang Constitutional Medicine
• /
• v.18 no.1
• /
• pp.147-154
• /
• 2006

1. Objectives This study was aimed to evaluate marker substances in Gamijowi-tang by high performance liquid chromatography(HPLC) 2. Methods The seperation was performed an AquasilC18(4.6X250mm)column by gradient elution with 0.1N H3PO4 in H2O - acetonitrile(0min 100:10,20min60:40, 40min 80:20, 60min 100:0) as the mobile phase at a flow-rate of 1.0 ml/min with detection at 190-800nm 3. Results Ephedrine and schizandrin were established as marker substances in Gamijowi-tang and its qualitative analysis was carried out. Analyzed was similarity of marker substances between in standard article and in Gamijowi-tang. The result of the analysis was that ephedrine and schizadrin showed 0.9999 of similarity, which meant they were really ephedrine and schizadrin. In addition, ephedrin content was 12.16mg, pseudoephedrine conrenr was 5.09mg, and schizandrin content was 26.6mg in 76g of Gamijowi-tang. 4. Conclusions Qualitative and quantitative analyses of ephedrine and schizandrin in Gamijowi-tang were conducted, and it was identified thar they could be used as marker substances in standardizing quality of Gamijowi-rang.