• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1262-1266
• /
• 2010

In this study, we investigated the use of liquid crystals to selectively detect the activity of enzymes at interfaces decorated with oligopeptide-based membranes. We prepared a mixed monolayer of tetra(ethylene glycol)-terminated lipids and carboxylic acid-terminated lipids at the aqueous-liquid crystal (LC) interface. The 17 amino-acid oligopeptide SNFKTIYDEANQFATYK was then immobilized onto this mixed monolayer through N-hydroxysuccinimide-activation of the carboxylic acid groups. We examined the orientational behavior of nematic 4-cyano-4'-pentylbiphenyl (5CB) after conjugation of the 17 amino-acid oligopeptide with the mixed monolayer assembled at the interface. Immobilization of the oligopeptide caused orientational transitions in 5CB, with a change from homeotropic (perpendicular) to tilted alignment, which was primarily due to the reorganization of the monolayer. The orientation of the 5CB molecules returned to its homeotropic state after contacting the interface containing ${\alpha}$-chymotrypsin, which can cleave the immobilized oligopeptide. Control experiments confirmed that the enzymatic activity of ${\alpha}$-chymotrypsin triggered the ordering transitions in the LC. These results suggest that the LC can provide a facile method for selective detection of enzymatic activity.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1108-1111
• /
• 1999

결정성장 도중 전류에 의해 고/액 계면에서 발생하는 Peltier 열을 이용하면 온도구배의 증가와 이에 따른 성장속도의 증가 및 결정성의 향상에 기여할 것이라 예상되어, 고/액 계면에서 복합적으로 발생하는 Peltier 효과를 조사하였다. 전류 밀도, 극성 및 온도구배의 변화에 따른 고상과 액상 및 그 계면에서의 온도변화로부터 이론적 추론에 의해 Peltier 열, Thomson 열 및 Joule 열만의 영향으로 분류할 수 있었고, 고상/액상 계에 대한 Peltier 계수 및 Thomson 계수도 구할 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.61-62
• /
• 2000

We have studied the molecular orientation by the phase transitions of the chiral smectic liquid crystals, 4-(1-Trifluoromethyl-6-ethoxy-hexyloxycarbonlphenyl)-4-nonyloxybiphenyl-4-carbo-xylate (R-TFMEOHPNBC) to seek the original solution of the zig-zag defect using two different experimental techniques; optical system and x-ray scattering. The phase sequence is gamma ferroelectric $(SmC{\gamma}\;^*)$ ${\rightarrow}$ smectic A (SmA) ${\rightarrow}$ isotropic (I). Existence of two layer spacing at chiral smectic phase gives a possibility of the molecular orientation in two different tilt angles, ${\theta}\;_1$ and ${\theta}\;_2$, which are separated each other to the layer normal at a given temperature. The gamma ferroelectric-like phase is, first, discovered in the single compound.

• 한국재료학회지
• /
• 제18권10호
• /
• pp.521-528
• /
• 2008

We present the structural, optical, and electrical properties of amorphous silicon suboxide (a-$SiO_x$) films grown on indium tin oxide glass substrates with a radio frequency magnetron technique from a polycrystalline silicon oxide target using ambient Ar. For different substrate-target distances (d = 8 cm and 10 cm), the deposition temperature effects were systematically studied. For d = 8cm, oxygen content in a-$SiO_x$ decreased with dissociation of oxygen onto the silicon oxide matrix; temperature increased due to enlargement of kinetic energy. For d = 10 cm, however, the oxygen content had a minimum between $150^{\circ}\;and\;200^{\circ}$. Using simple optical measurements, we can predict a preferred orientation of liquid crystal molecules on a-$SiO_x$ thin film. At higher oxygen content (x > 1.6), liquid crystal molecules on an inorganic liquid crystal alignment layer of a-$SiO_x$ showed homogeneous alignment; however, in the lower case (x < 1.6), liquid crystals showed homeotropic alignment.

• 한국정보전자통신기술학회논문지
• /
• 제16권2호
• /
• pp.109-115
• /
• 2023

본 논문은 UV(ultraviolet) 처리된 자기 조립 단분자막(fluorinated self-assembled monolayers; FSAM)을 배향막으로 사용한 액정의 배향 특성을 분석하였다. 물리화학적 분석을 사용하여 UV 처리 전후의 ITO(indium-tin-oxide) 유리 기판의 FSAM 특성을 확인하였다. FSAM 표면은 UV 처리에 의해 소수성에서 친수성으로 변화하였다. LC(liquid crystal) 분자는 UV 처리된 FSAM 표면에서 수평방향으로 정렬되었고 선경사각도 90°에서 0°로 변화하였다. UV 처리된 FSAM을 배향막으로 사용하여 제작된 TN(twist nematic) 셀의 전기광학(electro optics; EO) 특성은 기존의 PI(polyimide) 배향막에 비해 응답 시간이 빠른 것을 확인하였다. 이는 UV 처리된 FSAM 이 LCD(liquid crystal display)의 기존 폴리이미드 배향막을 대체할 잠재적인 가능성을 가진다.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.969-976
• /
• 2007

In this thesis, an anchoring energy in the upper and lower substrates of TFT-LCD cell has been modeled and applied in the numerical calculation of the molecular orientation of the TN-LCD. The molecular orientation of liquid crystals defined as tilt and twist angles was simulated using the Newton-Raphson method and the Gaussian integration method. From the results, the tilt and twist angles for the strong anchoring energy were proven to be coincide with those of the conventional results. on the other hand, for the weak anchoring energy, azimuth angles of the molecules were changed abruptly from $0^{\circ}\;to\;90^{\circ}$ near the middle area of the cell due to the balance of the anchoring energy and the elastic energy of the liquid crystals.

• 센서학회지
• /
• 제28권6호
• /
• pp.341-344
• /
• 2019

Liquid crystal (LC) mesophase materials manifest a variety of phase transitions. The optical properties of LCs are highly dependent upon the phase and orientation of the optical axis with respect to the polarization of incoming light. Studying the LC phase transitions is significantly important for a wide range of scientific and industrial applications. In this study, we demonstrate the propagation velocity of the phase boundary between the nematic and isotropic phase of 4-Cyano-4-pentylbiphenyl (5CB) liquid crystal for different electric fields using a polarized optical microscope. The results demonstrate that the propagation velocity of the phase boundary exhibits a peak value for a specific voltage, attributed to the supercooling of the isotropic phase of the LC. The analysis of the propagation velocity for different electric fields also provides a simple optical platform to measure the thermal anisotropy and voltage dependent thermal properties of the homogeneously aligned LC.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.106-113
• /
• 2000

Single crystallization behavior ad high temperature tensile properties of TLP bonded joints of Ni-base single crystal superalloy, CMSX-2 were investigated using MBF-80 and F-24 insert metals. CMSX-2 was bonded at 1523~1548K for 1.5~1.8ks in vacuum. The (100) orientation of bonded specimen was aligned perpendicular to the joint interface. Crystallographic orientation analyzed points over the bonded region possessed the almost same orientation across the joint interface and misorientation $\Delta^{\theta}$ was negligibly small in as-bonded and post-bond heat-treated situations. It was confirmed that single crystallization could be readily achieved during TLP bonding. The tensile strengths of all joints at elevated temperatures were equal to or greater than those of base metal the range of testing temperature between 923K and 1173K. The elongation and reduction of area in values were almost the same as those of base metal. SEM observation of the fracture surfaces of joints after tensile test revealed that the fracture surface indicated the similar morphologies each other, and that the fracture of joints occurred in the base metal in any cases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1088-1091
• /
• 2003

We have studied liquid crystal orientation on rubbed and photoaligned polymer surfaces. The following topics will be presented; (1) visualization of nonuniformity of rubbing, (2) competition between grooves and photoalignment and (3) alignment process of 5CB evaporated on treated surfaces. Through these topics, the importance of the intermolecular liquid crystalline interaction will be emphasized.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.82-87
• /
• 2001

The creep-rupture and low cycle fatigue properties of transient liquid phase bonded joints of Ni-base single crystal superalloy, CMSX-2 was investigated using MBF-80 insert metal. The (100) orientation of bonded specimen was aligned perpendicular to the joint interface. CMSX-2 was bonded at 1523K for 1.8ks in vacuum, optimum bonding condition. The creep rupture strength and rupture lives of the joints were the almost identical to ones of the base metal. SEM observation of the fracture surfaces of joints after creep rupture test revealed that the fracture surfaces classified three types of region, ductile fracture surface, cleavage fracture surface and interfacial fracture surface. The low cycle fatigue properties of the joints were also the same level as those of base metal. The elongation and reduction of area values of joints were comparable to those of base metal while fell down on creep rupture condition of high temperature.