• 제목/요약/키워드: liquid crystal devices

검색결과 205건 처리시간 0.025초

Liquid Crystal Spatial Light Phase Modulator and its Applications

  • Hara, Tsutomu
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.939-942
    • /
    • 2002
  • The optically addressed and electrically addressed spatial phase only light modulators without pixelized structures have been developed. A sufficient phase modulation capability and a high diffraction efficiency of these devices are useful for practical applications.

  • PDF

태양전지용 액상에피텍시얼 실리콘 박막성장을 위한 용매에 관한 계산 (Solvents for liquid phase epitaxial growth of silicon thin film for photovoltaics based on calculation)

  • 이수홍
    • 한국결정성장학회지
    • /
    • 제5권1호
    • /
    • pp.37-43
    • /
    • 1995
  • 실리콘의 용액성장을 위해서는 우선 적절한 용매의 선택이 선행되어야 한다. 이 논문에서는 최소한의 실리콘을 (1 atomic%) 고용할 수 있는 온도를 여러 용매를 대상으로 계산하였다.

  • PDF

The Injection of PDLC Solution Mixture in a Reduced Pressure

  • Kim, Kang-Pil;Yang, Kee-Jeong;Kim, Dae-Hwan;Choi, Byeong-Dae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.524-526
    • /
    • 2007
  • Polymer dispersed liquid crystal (PDLC) films consist of micro-droplets of liquid crystals dispersed in a polymer matrix. To make wide area PDLC filled devices, it is necessary to develop reliable method of vacuum injection of PDLC solution instead of the capillary injection. However, well-known 2-ethylhexylacrylate (EHA), main element of a prepolymer, exhibits the volatility problems, when the PDLC solution is placed under the low pressure. In this study, we developed the vacuum injection process to fill a wide area cell. Experimental results indicate that the $V_{90}$(turn-on voltage) of the PDLC cell made by a vacuum injection method are lower than that of the PDLC cell made by a capillary injection method.

  • PDF

Sound Propagation in 5CB Liquid Crystals Homogeneously Confined in a Planar Cell

  • Ko, Jae-Hyeon;Hwang, Yoon-Hwae;Kim, Jong-Hyun
    • Journal of Information Display
    • /
    • 제10권2호
    • /
    • pp.72-75
    • /
    • 2009
  • The Brillouin spectrum of 4'-n-pentyl-4-cyano-biphenyl (5CB) liquid crystals homogeneously confined in a planar liquid crystal (LC) cell was measured using a 6-pass tandem Fabry-Perot interferometer. By adopting a special right-angle scattering geometry, the sound velocity of 5CB was estimated from the Brillouin shift without knowing the refractive index. The sound velocity of the longitudinal wave propagating along the direction of the directors aligned parallel to the glass plates of the LC cell was 1784${\pm}$7 m/s at 300 K. The attenuation coefficient $\alpha$ was estimated to be approximately $1.9{\times}10^6m^{-1}$, which is about twice as large as that of the longitudinal sound wave propagating along the direction perpendicular to the directors. The present method may be very useful in the evaluation of the elastic properties of the materials used in display devices, whose refractive indices are not known.

Liquid crystal alignment on rubbed self-assembled monolayers with fluorinated alkyl chain

  • Oh, Chan-Woo;Hwang, Seok-Gon;Park, Sang-Geon;Park, Hong-Gyu
    • 한국정보전자통신기술학회논문지
    • /
    • 제11권6호
    • /
    • pp.671-677
    • /
    • 2018
  • In this paper, we investigated the vertical alignment characteristics of liquid crystals (LCs) on fluorinated self-assembled monolayers (FSAMs). For comparison, a commercialized homeotropic polyimide (PI) layer was used as an LC alignment layer. We confirmed the successful deposition of FSAMs and the change of FSAMs before and after rubbing treatment through contact angle measurement and atomic force microscopy. The optical transmittance spectrum of the FSAMs is similar to that of the homeotropic PI layer, which is a superior optical characteristic applicable to LC devices. When FSAMs were applied to the vertically aligned (VA) LC cell, uniform and vertical LC alignments were achieved. In addition, the voltage-transmittance characteristic of VA LC cell with FSAMs was superior to that of VA LC cell with the conventional homeotropic PI layers. These results indicate that the FSAMs are suitable as the homeotropic LC alignment layer for enhanced LC devices.

(고분자/액정) 복합막의 상분리구조와 전기광학 특성 (Phase Separated Structure and Electro-optical Properties of the (Polymer/Liquid Crystal) Composite Films)

  • 박관선;노창호;사공동식;남기대;카지야마
    • 한국응용과학기술학회지
    • /
    • 제12권2호
    • /
    • pp.29-39
    • /
    • 1995
  • The phase separated structure and the electro-optical properties of the (polymer/liquid) crystal : LC) composite film strongly depended on the weight fraction of LC in it. The continuous LC phase was formed in a three-dimensional polymer network when the LC weight fraction was above 40wt%. The aggregation structure of the composite film could be controlled by controlling the solvent evaporation velocity during the film preparation process. The smaller LC domains or channels were formed in the case of the faster solvent evaporation velocity. The composite film exhibited reversible light scattering-light transmission switching upon electric field -OFF and -ON states, respectiverly. The light scattering properties of the composite film strongly depended on the spatial distortion of the nematic directors as well as the mismatch in refractive indices between matrix polymer and LC.

전기적 편광 조절형 카메라를 위한 수직 배향형 액정 소자 연구 (A study on vertical alignment liquid crystal devices for electrically polarization controlled camera)

  • 이나경;안현식;김성민;김민상;박승서;최윤석
    • 전기전자학회논문지
    • /
    • 제27권4호
    • /
    • pp.512-517
    • /
    • 2023
  • 본 연구에서는 액정에 인가되는 전압을 조절하여 편광을 조절할 수 있는 액정 기반 편광 조절 기술을 폐쇄회로 텔레비전(CCTV)에 적용하여 사용자가 원하는 각도의 편광만을 투과시킬 수 있는 시스템을 제안한다. 기존의 편광필름이 적용된 CCTV는 역광 보정 기능에 치중되어 있기 때문에 편광을 제어할 수 없어 수면에서 반사된 빛이나 차량에서 반사된 하이라이트가 피사체 식별을 방해한다. 그러나 Vertical Alignment 모드를 사용하면 전기적으로 편광을 조절할 수 있기 때문에 사용자가 원하는 각도의 편광만 투과시켜 반사되는 하이라이트를 제거할 수 있다. 이 기술을 사용하여 얻은 이미지들은 컴퓨터 소프트웨어에 의해 최적의 이미지로 도출하였다. 편광 각도와 투과율, 편광 속도를 전기적으로 제어할 수 있는 액정 편광 패널을 편광 폐쇄회로 텔레비전에 적용하여 기존 CCTV에서의 피사체 식별을 개선하였다.

Biphenyl thioester 계열 강유전성액정의 합성 및 물성에 관한 연구 (Synthesis and mesomorphic properties of biphenly thioester series in ferroelectric liguke crystal)

  • 전영재
    • 한국재료학회지
    • /
    • 제3권1호
    • /
    • pp.72-83
    • /
    • 1993
  • 비페닐 티오에스터 계열 강유전성 액정물질에 대한 새로운 합성방법이 논의되었다. 합성된 많은 액정물질들은 강유전성 스메틱 C상 뿐만 아니라 키랄네마틱과 스메틱 A상을 나타내었으며, $10^{-8}$C/c$m^2$ 이상의 큰 자발분극을 나타내었다. 이 계열들로써 우리는 비대칭 탄소에 붙은 치환체의 크기와 분극도가 자발분극에 미치는 영향을 조사하였으며 치환체의 크기에 대한 Sc*상의 안정도를 결정할 수 있었다.

  • PDF

Fabrication of Organic Nanowire Electronics by Direct Printing Method

  • 박경선;성명모
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.563-563
    • /
    • 2012
  • We report a one-step fabrication of single-crystal organic nanowire arrays on substrates using a new direct printing method (liquid-bridge-mediated nanotransfer moulding, LB-nTM), which can simultaneously enable the synthesis, alignment and patterning of the nanowires using molecular ink solutions. Two- or three-dimensional complex structures of various single-crystal organic nanowires were directly fabricated over a large area with a successive process. The position of the nanowires can be aligned easily on complex structures because the mold is movable on substrates before drying the polar liquid layer, which acts as an adhesive lubricant. This efficient manufacturing method can produce a wide range of optoelectronic devices and integrated circuits with single-crystal organic nanowires.

  • PDF