• 제목/요약/키워드: liquid conservation

검색결과 150건 처리시간 0.026초

미세노즐을 통한 액적형성에 관한 수치적 연구 (Numerical Study on Drop Formation Through a Micro Nozzle)

  • 김성일;손기헌
    • 대한기계학회논문집B
    • /
    • 제29권2호
    • /
    • pp.205-213
    • /
    • 2005
  • The drop ejection process from a micro nozzle is investigated by numerically solving the conservation equations for mass and momentum. The liquid-gas interface is tracked by a level set method which is extended for two-fluid flows with irregular solid boundaries. Based on the numerical results, the liquid jet breaking and droplet formation behavior is found to depend strongly on the pulse type of forcing pressure and the contact angle at the gas-liquid-solid interline. The negative pressure forcing can be used to control the formation of satellite droplets. Also, various nozzle shapes are tested to investigate their effect on droplet formation.

Facilitated Transport of Cr(VI) through a Supported Liquid Membrane with a Carrier

  • Park, Sang-Wook;Lee, Jae-Wook;Kim, Sung-Soo;Choi, Byoung-Sik
    • 한국응용과학기술학회지
    • /
    • 제20권2호
    • /
    • pp.154-164
    • /
    • 2003
  • This paper has applied a simple model to the mass transfer mechanism of Cr(VI) with crownether in a batch-type, supported liquid membrane module. Concentration at pH 3 are as follows : 0.012 kmol/$m^3{\le}$18-crown-6${\le}$0.036 kmol/$m^3$ and 20 g/$m^3{\le}$ Cr(VI)${\le}$500 g/$m^3$. The measured values of forward- and backward-reaction rate constants between Cr(VI) and 18-crown-6 were used to simulate the model with the mass conservation equation and associated boundary conditions. Comparison between the experimental and simulated facilitated factor of Cr(VI) transport led to classification of reaction regions.

핵비등에서의 기포거동에 관한 수치해석 (Numerical Simulation of Bubble Motion During Nucleate Boiling)

    • 대한기계학회논문집B
    • /
    • 제25권3호
    • /
    • pp.389-396
    • /
    • 2001
  • Direct numerical simulation of bubble growth and merger process on a single nucleation site during partial nucleate boiling is performed. The equations governing conservation of mass, momentum and energy are solved using a finite difference method combined with a level set method for capturing the vapor-liquid interface. The level set method is modified to include the effects of phase change at the interface and contact angle at the wall. Also, a simplified formulation for predicting the evaporative heat flux in a thin liquid micro-layer is developed and incorporated into the level set formulation. Based on the numerical results, the bubble growth and merger pattern and its effect on the heat transfer are discussed.

수직 벽에서 과열증기의 막응축에 대한 열물성의 영향 (The Influence of Variable Thermophysical Properties for Filmwise Condensation of Superheated Vapor on a Vertical Wall)

  • 김경훈;성현찬
    • 설비공학논문집
    • /
    • 제12권3호
    • /
    • pp.235-243
    • /
    • 2000
  • A theoretical model for laminar filmwise condensation along an isothermal vertical wall at constant pressure has been formulated on the basis of conservation laws and other fundamental physical principles. The model was applied to the prediction of the influences of variable thermophysical properties of liquid and vapor layers in the filmwise condensation of superheated vapor of Rl2, R134a, R142b and R152a. The dimensionless velocity component method was employed in the transformation of the governing equations and their boundary conditions, and the polynomial method was used for treating variable thermophysical properties of liquid and vapor. Physical quantities, such as the dimensionless thickness of the liquid layer, local heat transfer rate and mean heat transfer coefficient, were investigated for different values of the superheated temperature of the stagnant vapor far from the wall. It was found that the value of mean heat transfer coefficient of R134a was higher than other refrigerants for the change of the superheated temperature.

  • PDF

출토 금직물의 강화처리에 관한 연구 (Study of Consolidation of Excavated Fabric with Golden Thread)

  • 홍문경;배순화;이미식
    • 한국의류학회지
    • /
    • 제33권8호
    • /
    • pp.1315-1324
    • /
    • 2009
  • This study is on the consolidation process of the conservation process of fabric with golden thread found in relics. Gold film was glued to pieces of Korean paper and satin using hide glue, which is a natural adhesive and resin Paraloid B-72, which is a liquid type adhesive. This study examines the types and concentration of the adhesives that are appropriate for consolidating gold film on fabric. The advantage of hide glue is that it is harmless to humans and has a high stability. This glue is also believed to be the closest to the adhesive that was used when the relic was originally made. Its weakness is that it is stiff and weaker than chemical glues, but after being washed with water the adhesion level increases. Therefore, hide glue is appropriate in the following instances: a) when washing after consolidation b) when the substrate of gold threads are significantly damaged, and c) when treating greater sized relics that take a longer time to work on. However, Paraloid B-72 has a better adhesion and flexibility than hide glue, but tends to spread out into a greater area, and the area where it is applied tends to absorb less water than before the application. In addition, it is noxious and can be harmful in long-term exposure. Therefore, Paraloid-72 is appropriate in the following instances: a) when consolidating the fabric after washing, and b) when working on smaller relics and consolidating smaller parts of a relic. The necessary concentration levels for consolidants for gold film are 30% for liquid type hide glue and at least 10% for Paraloid B-72 in order for the gold film to stay intact on the fabric during washing, consolidation, exhibition, and conservation.

적외선분광분석과 Py-GC/MS를 이용한 옻칠 및 캐슈칠도막 분석 (Analysis of Lacquer and CNSL Using Infrared Spectrometer and Pyrolysis-GC/MS)

  • 최재완;김수철
    • Journal of the Korean Wood Science and Technology
    • /
    • 제46권1호
    • /
    • pp.1-9
    • /
    • 2018
  • 칠기문화재 보존에 옻칠이 사용되지만 근대화로 인해 캐슈칠과 같은 합성도료가 같이 사용되는 추세이다. 보존윤리에서는 문화재 보존 시 동일 재료가 사용되어야 한다고 명시되어있다. 따라서 칠기문화재 보존에는 옻칠과 같은 천연 도료가 사용되어야 한다. 하지만 옻칠과 캐슈칠의 성분이 유사하여 전문가들도 쉽게 구분하지 못하는 실정이다. 본 연구에서는 IR과 Py-GC/MS를 이용하여 이를 분석하고 식별 키워드를 찾고자 하였다. IR 분석 결과 옻칠은 $720cm^{-1}$ 대에서 피크가 확인되었으며 캐슈칠은 $750cm^{-1}$, $720cm^{-1}$, $700cm^{-1}$ 대에서 피크가 확인되었다. Py-GC/MS 결과 두 종류의 시료에서 Benzene과 Phenol계 화합물과 알킬사슬고리에 기인하는 성분이 검출되었다. 하지만, 캐슈칠에서는 Hexanoic acid라는 성분이 검출되었고 옻칠에서는 검출되지 않았다. 이러한 분석방법을 토대로 진정성 있는 칠기문화재 보존처리 및 복원에 활용될 수 있을 것이라 판단된다.

진동하는 유동장하에서 내부 순환 유동을 고려한 액적의 증발에 관한 수치적 연구 (A numerical study on the vaporization of a droplet considering internal circulating flow in the presence of an oscillating flow)

  • 하만영
    • 대한기계학회논문집B
    • /
    • 제20권5호
    • /
    • pp.1700-1716
    • /
    • 1996
  • The two-dimensional, unsteady, laminar conservation equations for mass, momentum, energy and species transport in the gas phase and mass, momentum and energy in the liquid phase are solved simultaneously in spherical coordinates in order to study heating and vaporization of a droplet entrained in the oscillating flow. The numerical solution gives the velocity and temperature distribution in both gas and liquid phase as a function of time. When the gas flow oscillates around an vaporizing droplet, the liquid flow circulates in the clockwise or counterclockwise direction and the temperature distribution in the liquid phase changes its shapes, depending on the gas fow direction. When the gas flow changes its direction of circulating liquid flow is opposite to the gas flow, forming two vortex circulating in the opposite direction. During the heating period, the difference in the maximum and minimum temperature is large, followed by the almost uniform temperature slightly below the boiling temperature. The mass and heat transfer from the droplet depend on the droplet temperature, droplet diameter and the magnitude of relative velocity, giving the droplet lifetime different from the d$^{2}$-law.

양면에서 부분적으로 유체와 접하는 사각평판의 고유진동 (Free Vibration of a Rectangular Plate Partially in Contact with a Liquid at Both Sides)

  • 정경훈;이규만;김태완;박근배
    • 한국소음진동공학회논문집
    • /
    • 제18권1호
    • /
    • pp.123-130
    • /
    • 2008
  • An analytical method for the free vibration of a flexible rectangular plate in contact with water is developed by the Rayleigh-Ritz method. The plate clamped along the edges is partially contacted with water at both sides. It is assumed that the contained water is incompressible and inviscid. The wet mode shape of the plate is assumed as a combination of the dry mode shapes of a clamped beam. The liquid motion is described by using the liquid displacement potential and determined by using the compatibility conditions along the liquid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict excellently the fluid-coupled natural frequencies comparing with the finite element analysis result.

눈꽃동충하초 및 번데기동충하초균의 적정 병원력 유지조건 구명 (Study of optimal pathogenicity condition on cordyceps)

  • 정이연;남성희;홍인표;유승헌
    • 한국잠사곤충학회지
    • /
    • 제45권1호
    • /
    • pp.31-33
    • /
    • 2003
  • 본 연구는 눈꽃동충하초속균과 번데기동충하초균의 적정 보관온도 및 모균주 보존기간에 따른 동충하초속균의 활성을 검정하기 위해 수행하였다. 보급종균(액체종균)의 보관온도 및 보관일수별 활성 검정에서 4$^{\circ}C$에서 10일간 보관시 누에 감염율 및 자실체 형성율이 각각 88.0%, 96.2%로 대조구와 비슷한 높은 활성을 나타냈으나, $25^{\circ}C$ 보관시에는 감염율이 급격히 저하(5% 이하)하였다. 또한 모균주 보존기간별 조사에서 4$^{\circ}C$ 보존구가 냉동보존(-2$0^{\circ}C$, -7$0^{\circ}C$) 및 동결건조보존법에 비하여 우수하였고 대조구와 비교시에도 유의성이 없었으며 12개월 보존시에도 감염율 90% 이상이었다. 따라서 본 시험 결과로 볼 때 눈꽃동충하초(Paecilomyces tenuipes) 및 번데기동충하초균(Cordyceps militaris)을 냉장보존(4$^{\circ}C$)이 가장 적당하다고 생각된다.

초임계 상태에서의 LOx 스월 인젝터에 대한 동적 수치 모델링 (Dynamic Numerical Modeling for LOx Swirl Injector at Supercritical Conditions)

  • 김국진;허준영;김종찬;성홍계
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 제33회 추계학술대회논문집
    • /
    • pp.42-46
    • /
    • 2009
  • 고압 조건에서 작동하는 고성능 액체 로켓 엔진에 대한 이해를 위해 초임계 조건의 스월 인젝터에서 액체 산소의 동적 특성이 수치적으로 연구되었다. 난류 수치 모델은 large eddy simulation을 기반으로 하였으며 보존 방정식과 SRK 상태 방정식, Chung의 기법을 포함하고 있다. 또한 수렴 속도의 증가를 위해 예조건화 기법이 적용되었다. 수치 해석 결과는 이상 기체 상태 방정식을 적용한 결과와 비교 되었으며 인젝터 내부와 연소실에서 액상이 존재하는 영역에서의 상태량과 동적 특성의 차이가 관찰되었다.

  • PDF