• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.356-359
• /
• 2007

Writable Cholesteric Liquid Crystal Display and the algorithm used to detect its image were developed. We could use any hard tip, ex: the tip of a forefinger, to directly write an image on the surface of Cholesteric Liquid Crystal Display (CHLCD). By measuring the capacitance of one pixel of test cell (12mm x 15mm/1x1), F-state or P-state could be detected. By measuring the capacitance of one pixel of 4.1" CHLCD (241um x 241um/ 320x320), F-state or Pstate could not be detected, due to the effect of parasitic capacitance. Therefore, high frequency measurement and the algorithm were developed to detect the image on CHLCD.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.195-198
• /
• 2001

We developed the portable blood analysis system, which can be measured pH of the blood. This system is composed to electronic circuit, mechanism, and system software. Electronic circuit is composed to the sensor, pre-amp part, temperature regulation part, fluid sensing part, A/D(analog to digital) conversion part, main and peripheral device processing part. And the mechanism is composed to the flow cell and the liquid flow part. The liquid flow part is consisted of blood and washing control system under the control of the 6-channel solenoid valve and syringe rump. The system software is composed to measurement program, calibration program, washing and diagnostic program. The program of each routine is designed as sequential process for an efficiency. And the portable pH analysis system used two-point calibration method using the two types of corrective liquid. As a result, we obtained the calibration curve and calculated the value of pH. For verifying the system, we confirmed the output voltage of the sensor, and estimated reappearance of system using the standard liquid.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.43-48
• /
• 2013

In this paper, magnetic buoyancy force on nonmagnetic solid object submerged in magnetic liquid was simulated and measured. For the evaluation of the force, a multi-physics approach of hydrostatic equilibrium considering magnetic body force as well as gravity is presented. The magnetic body force should be regarded as an additional forcing term in the momentum equation of hydrodynamics. It is also shown that the virtual air-gap based Kelvin's force formula is a useful method for the calculation of force distribution in the magnetic liquid. The experimental result which was performed by a load-cell measurement system agreed quantitatively well with the numerical one.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.2
• /
• pp.82-85
• /
• 2013

This paper introduces 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) doped liquid crystal (LC) alignment properties on a rubbed polyimide (PI) layer as a function of the doping concentration of TIPS pentacene. Pretilt angles, photomicrographs, and electro-optical properties of TIPS pentacene doped LCs were comparable to those of pure LCs. However, TIPS pentacene in a LC medium supported twisted nematic-liquid crystal displays (TN-LCDs) to improve electro-optical properties. The threshold voltages observed in the TN cells decreased as the TIPS pentacene concentration increased. In addition, suitable response times were observed in TN cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.406-407
• /
• 2007

We report the observed peculiar double four lobe textures in CNT dispersed nematic liquid crystal under vertical field. The electro optic studies in a wide range of applied field showed that the double four lobe texture was observed only in the field range of 120 to 160v. This observed peculiar phenomena is explained in terms field induced movement of CNTs and the subsequent reorientation of Liquid crystal molecules.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.5
• /
• pp.357-360
• /
• 2019

We demonstrate an alignment technology using an imprinting process on an inorganic NiOx film. The aligned nanopattern was fabricated on a silicon wafer by laser interference lithography. The aligned nano pattern was then imprinted onto the sol-gel driven NiOx film using an imprinting process at an annealing temperature of $150^{\circ}C$. After the imprinting process, parallel grooves had been formed on the NiOx film. Atomic force microscopy and water contact angle measurements were performed to confirm the parallel groove on the NiOx film. The grooves caused liquid crystal alignment through geometric restriction, similar to grooves formed by the rubbing process on polyimide. The liquid crystal cell exhibited a pretilt angle of $0.2^{\circ}$, which demonstrated homogeneous alignment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1533-1536
• /
• 2006

A novel single cell gap transflective liquid crystal display was developed. By using the ink jet printing technology, we fabricated a transflective liquid crystal display with the hybrid alignment in the reflective region and the homogeneous alignment in the transmission region. Compared with the traditional technologies, our technology provided the advantages of easy process, high yield, fast throughput, and less material usage. We also applied this technology to the 2.4 inch prototype. This panel could be implemented in the handheld product applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.116-119
• /
• 2004

In this paper, we have improved a novel (ECB) mode using tilt angle in the unique condition by hot-plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot-plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC $({\Delta}n>0)$ on the rubbed homeotropic PI surface by increasing temperature and time was measured. The EO characteristics of the novel ECB mode using control of tilt angle on the homeotropic surface than that of conventional OCB cell can be improved. We suggest that the developed the Novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.2
• /
• pp.37-44
• /
• 2014

The $Li-O_2$ battery has been attracting much attention recently, due to its very high theoretical capacity compared with Li-ion chemistries. Nevertheless, several studies within the last few years revealed that Li-ion derived electrolytes based on alkyl carbonate solvents, which have been commonly used in the last 27 years, are irreversibly consumed at the $O_2$ electrode. Accordingly, more stable electrolytes are required capable to operate with both the Li metal anode and the $O_2$ cathode. Thus, due to their favorable properties such as non volatility, chemical inertia, and favorable behavior toward the Li metal electrode, ionic liquid-based electrolytes have gathered increasing attention from the scientific community for its application in $Li-O_2$ batteries. However, the scale-up of Li-$O_2$ technology to real application requires solving the mass transport limitation, especially for supplying oxygen to the cathode. Hence, the 'LABOHR' project proposes the introduction of a flooded cathode configuration and the circulation of the electrolyte, which is then used as an oxygen carrier from an external $O_2$ harvesting device to the cathode for freeing the system from diffusion limitation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.501-509
• /
• 2003

We have designed transflective liquid crystal display(LCD) associated with in-plane switching of a LC director driven by fringe-field, unlike other LCD mode. Reflective area consists of a λ/2 compensation film and a LC cell with retardation value(dΔn) of λ/4 with their optic axes making an angle of 15$^{\circ}$ and 75$^{\circ}$ against polarizer, respectively. In the transmissive area, top and bottom polarizers are parallel each other, an LC has a dΔn of λ/2, and another λ/2 compensation film is inserted between the LC cell and bottom polarizer. With the configuration, both devices show dark state initially. When an incident light is 550nm, the device shows wide-viewing-angle characteristics such that in the reflective area the contrast ratio target than 5 exists up to 55$^{\circ}$ of polar angle in all directions and in transmissive area it exists about 100$^{\circ}$ in vortical direction and 110$^{\circ}$ in horizontal direction.