• KSBB Journal
• /
• v.22 no.4
• /
• pp.255-259
• /
• 2007

Liquid calcium fertilizer evenly dispersed has been prepared using calcium carbonate powder and several surfactants. The calcium contents of nine fruits and vegetables were compared after spraying the liquid fertilizer onto the leaf of them six times for 2 months. The calcium contents of cabbage and potato increased to 155% and 154%, respectively. In addition, by virtue of the relatively high contents of calcium, rigidities of the texture were also increased, which would result in higher value-added vegetables. Kimchi was prepared using a Korean cabbage sprayed with the liquid calcium fertilizer and its fermentation characteristics were analyzed. A sensory evaluation has been performed to give the best result for a calcium Kimchi fermented for 14 days.

• Preventive Nutrition and Food Science
• /
• v.15 no.4
• /
• pp.282-286
• /
• 2010

To isolate a calcium-binding peptide from chlorella protein hydrolysates, chlorella protein was extracted and hydrolyzed using Flavourzyme, a commercial protease. The degree of hydrolysis and calcium-binding capacity were determined using trinitrobenzenesulfonic acid and orthophenanthroline methods, respectively. The enzymatic hydrolysis of chlorella protein for 6 hr was sufficient for the preparation of chlorella protein hydrolysates. The hydrolysates of chlorella protein were then ultra-filtered under 5 kDa as molecular weight. The membrane-filtered solution was fractionated using ion exchange, reverse phase, normal phase chromatography, and fast protein liquid chromatography to identify a calcium-binding peptide. The purified calcium-binding peptide had a calcium binding activity of 0.166 mM and was determined to be 700.48 Da as molecular weight, and partially identified as a peptide containing Asn-Ser-Gly-Cys based on liquid chromatography/electrospray ionization tandem mass spectrum.

• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.235-238
• /
• 1997

Basic properties of new cement pastes based on the system $CaO-Al_2O_3-P_O_5-H_2O$were studied Phosphoric acid solutions and calcium dialuminate clinkers synthesized by the hydration-burning method were used for liquid and powder components of the paste, respectively Variation in the compositions of the paste was achieved by changing the liquid/powder ratio and the concentration of phosphoric acid solution. The hardening rate of the paste was so largely affected by the amount of phosphoric acid that hardening was inhibited with the low-concentrated solution but was explosively accelerated with the high-concentrated solution. The phosphoric acid solutions of concentration of 45~50% and the liquid/powder ratio of 0.5~1.5 were favoured for the high early-strength cement paste with the reasonable hardening rate and high strength. The binding phase of hardened paste was the dense amorphous gel of the system $CaO-Al_2O_3-P_O_5-H_2O$. in which the unreacted calcium dialuminate grains were embeded.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.715-720
• /
• 2005

This study was carried out to investigate the effect of chitosan-liquid calcium (CLC) on the high-calcium kimchi fermentation. The $0.5\%$ of CLC retarded the decreasing rate of pH and the increasing rate of titratable acidity, and these effects were more conspicuous with liquid calcium. Total microbes and lactic acid bacteria counts were lower in CLC $(0.5\%)$ added kimchi during fermentation. The a-value of kimchi juice was gradually increased but the L- and b-values were decreased. The calcium content of the kimchi supplemented with $0.5\%$ of CLC was maintained in the range of $207\~228\;mg\%$. In sensory evaluation test of $0.5\%$ CLC-added kimchi, the staled flavor was decreased, the crispness was maintained and the overall taste was increased to highest level after 15-day fermentation.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.232-238
• /
• 2016

In this study, a liquid carbonation method was applied for producing precipitate calcium carbonate by liquid-liquid reaction. Also a shuttle mechanism of wet chemical absorption using MEA was utilized. The high concentration $CO_2$(A) and exhaust gas(B) was used for collecting carbon dioxide in the 30% MEA aqueous solution, and $CO_2$ was fixed with rate of 0.35 mg of $CO_2$ per mg of sludge through the liquid carbonation process. It was found from SEM data that calcium carbonate was mainly made up with spherical vaerite with the mixing of a small quantity of calcite.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.45.1-45.1
• /
• 2009

In this study, we investigated a calcium phosphate-calcium sulfate injectable bone substitute (IBS) with organic reinforcement of chitosan, citric acid and hydroxypropyl-methyl-cellulose (HPMC). The powder component of IBS consisted of tetra calcium phosphate (TTCP), dicalcium phosphate dihydrate (DCPD) and calcium sulfate dihydrate (CSD). The liquid component was a solution of citric acid and chitosan. The effect of HPMC in terms of setting time, compressive strength and apatite forming ability on this IBS was investigated. The mass content of HPMC in liquid phase was varied in array of 0%, 2%, 3% and 4%. The setting times obtained between 20 and 45 minutes. Compressive strength was achieved over 20 MPa after incubation at 370C and in 100% humidity for 28 days. Porosities were evaluated in relation with compressive strength. Elastic moduli of the 28 days after-incubation IBS were obtained around 4GPa

• The Journal of Engineering Research
• /
• v.5 no.1
• /
• pp.73-87
• /
• 2004

The synthesis and crystallization of amorphous calcium carbonate($CaCO_3$.$nH_2 O$) obtained from gas-liquid reaction between aqueous solution of calcium hydroxide and carbon dioxide at 15~$50^{\circ}C$ are investigated by electrical conductometry, XRD and TEM. The results are as follows: The initial reaction products prior to the formation of precipitated calcium carbonate is amorphous calcium carbonate. The electrical conductivity values in the slurry are decreased during the formation of amorphous calcium carbonate which covers particle surface of calcium hydroxide and retard the dissolution of calcium hydroxide into the solution. that amorphous calcium carbonate is unstable in the aqueous solution and crystallizes finally to calcite by the through-solution reaction. While amorphous calcium carbonate crystallizes into chain-like calcite, the conductivity values are recovered rapidly and the apparent viscosity of slurry containing higher concentration of calcium hydroxide increase. At below pH 9.5, chain-like calcite separates into individual particles to form precipitated calcium carbonate. The formation and synthetic temperature range of amorphous calcium carbonate is most suitable a primary decreasing step(a-step) at $15^{\circ}C$ in the electrical conductometry.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.113-120
• /
• 2011

Precipitated calcium carbonate(PCC), particularly calcite crystal, is extensively used as a pigment, filler or extender in various industries such as paper, paint, textile, detergents, adhesives, rubber and plastics, food, cosmetics, and biomaterials. PCC is conventionally produced through the gas-liquid carbonation process, which consists on bubbling gaseous $CO_2$ through a concentrated calcium hydroxide slurry. This study is aimed to find some factors for controlling the morphology of engineered PCC in lab-scaled mixing batch. The experimental designs were based on temperature variables, $Ca(OH)_2$ concentration, $CO_2$ flow rate, and electrical conductivity. The model of engineered PCC morphology was finally controlled by adjustment of electrical conductivity(6.0~7.0 mS/cm) and $Ca(OH)_2$ concentration(10 g/L). Orthorhombic calcite crystals were mostly created at high concentration and electrical conductivity conditions because the increased ratio of $Ca^{2+}$ and $CO{_3}^{2-}$ ions affects the growth rate of orthorhombic faces. Excess calcium spices were contributed to the growth of faces in calcium carbonate crystal, and the non-stoichiometric reaction was occurred between $Ca^{2+}$ and $CO{_3}^{2-}$ ions during carbonation process.

• Korean Journal of Metals and Materials
• /
• v.46 no.2
• /
• pp.105-110
• /
• 2008

Process of the hydroxyapatite (HA) formation on bioactive titanium metal prepared by NaOH treatment in a modified-simulated body fluid (mSBF) containing bovine serum albumin (BSA) was investigated by high resolution transmission electron microscope attached with energy dispersive X-ray spectrometer (EDX). The amorphous titanate, which was formed on titanium surface by NaOH treatment, combined with the calcium ions in the liquid to form an amorphous calcium titanite. With increasing of soaking time in the liquid, an amorphous calcium titanite combined with the phosphate ions to form an amorphous calcium phosphate with low Ca/P atomic ratio, and it grows as aggregates of plate (or needle)-like substance on titanium surface. The crystalline apatite layers, which are needle-shaped with the c axis parallel to the long axis, are formed in an amorphous calcium phosphate with further increase in soaking time. The formation of needle-shaped apatite layers can be explained by electrostatic effects and difference of concentration between calcium, phosphate, and albumin ions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.969-974
• /
• 2013

In this study, liquid calcium was used to develop a calcium-fortified soy sauce-based seasoning for meat and the quality characteristics of the seasoning and cooked meat were investigated. All seasonings with different amount of liquid calcium (0, 2, 4, or 8%) showed no significant changes in pH and titratable acidity at $4^{\circ}C$ for 9 days; however, the control seasoning and seasoning with 2% liquid calcium (Ca-2%) showed significant decreases in pH and increases in titratable acidity during storage at $20^{\circ}C$ for 9 days, compared to the seasoning with 4% (Ca-4%) and 8% (Ca-8%) liquid calcium. We also observed that during storage at $20^{\circ}C$, the numbers of total aerobic bacteria, lactic acid bacteria, and yeast were significantly lower in Ca-4% and Ca-8% seasoning compared to the control or Ca-2%. The calcium contents in cooked meat seasoned with the control, Ca-2%, Ca-4%, or Ca-8% were 2.16, 33.47, 54.72, and 58.23 mg/100 g, respectively. Sensory evaluations demonstrated no significant differences in flavor, taste, juiciness, texture, and overall acceptability between the cooked meat samples. These results suggest that soy sauce seasoning supplemented with liquid calcium (2~8%) effectively increases the calcium content in cooked meat without adversely affecting its taste, flavor, and juiciness. Thus, this type of calcium-fortified seasoning may be helpful in combating the lack of calcium in modern diets.