• Korean Journal of Veterinary Research
• /
• v.31 no.1
• /
• pp.33-40
• /
• 1991

For the observations of both the membrane properties and the excitability on the unfertilized eggs of female mice, changes of the membrane resistance and the membrane potential by hyerpolarizing current stimulation were recorded. As current-voltage relation was linear over the entire range (-180mV~+60mV), membrane resistance($R_m$) was calculated from the amplitude of electrotonic potential to a given stimulus current. Also the presence of anode-break excitation was confirmed. The results were as follows; 1. There was a linear relation between the membrane resistance and resting membrane potential, the expected input resistance was 61. 4M$\Omega$(resting membrane potential was $-18.9{\pm}8.7mV$, mean${\pm}$SD, n=30). 2. Transient depolarization with overshoot was generated just after hyperpolarizing current stimulus and showed the dependency of stimulus duration. 3. Transient depolarization lasted over 30ms, amplitude of these depolarization was increased by high $Ca^{{+}{+}}$(20mM) and inhibited by $Ca^{{+}{+}}$-antagonist, $Mn^{{+}{+}}$. 4. From the above results, it was suggested that the unfertilized mouse egg showed the characteristics of the excitable cell.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.20 no.1
• /
• pp.47-58
• /
• 1983

A study is made, in the framework of linear potential theory, to investigate the hydrodynamic characteristics of two-dimensional wave-energy absorbers as like the Salter's duck and an oscillating cam with Lewis-form section, which undergo uncoupled heaving and rolling motions in an incident linear gravity wave in deep water. Wave energy is supposed to be extracted by a linearly damped generator with an spring. Some well-known formulae in ship hydrodynamics such as Haskind-Newman relation and Bessho-Newman relation are utilized in forms of Kochin functions to derived expressions for efficiency, breaking effect and drift force of the absorber. Maximum ideal efficiency of 100% can be arrived at an prescribed tuning frequency. Coupling effect is also examined to assess the detrimental effect of sway on efficiency. From numerical calculations for both types of two-dimensional devices it may be concluded that a wave-energy absorber functions at the same time as a wave breaker and that the drift force acting on the device becomes smaller when it absorbs wave energy than as it oscillates freely. Finally the study is extended to an infinite array system, equivalent to a body in a canal, to show that all incident wave energy can be absorbed regardless of the absorber's size, only if the optimum space and the optimum condition of control are realized.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.5
• /
• pp.407-413
• /
• 2005

Ion implantation provides a unique way to modify the mechanical, optical and electrical properties of polymer by depositing the energy of ions in the material on the atomic scale. Implantation of ions into the polymers generally leads to a radiation damage, which, in many cases, modifies the properties of the surface and bulk of the material. These modifications result from the changes of the chemical structure caused in their turn by changing the chemical bonding when the incident ions cut the polymer chains, breaks covalent bonds, promotes cross-linking, and liberates certain volatile species. We studied the relation among the linear energy transfer (LET) and changes of surface microstructure and surface resistivity on PPS material using the high current ion implantation technology The surface resistivity of nitrogen implanted PPS decreased to $10^{7}{\Omega}/cm^{2}$ due to the chain scission, cross linking, ${\pi}$ electron creation and mobility increase. In this case, the surface conductivity depend on the 1-dimensional hopping mechanism.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.286-292
• /
• 1995

Proximate composition, dimension, water uptake and volume increase rates of three cultivars of Korean kidney beans, Pink(PKB), Red(RKB) and White(WKB) were compared. Significant differences in the proximate composition and calorie were not observed among samples. Hull removed samples showed the lowest ash content and the highest calorie. The rates of water uptake increased as the soaking temperature increased from 10~4$0^{\circ}C$. The moisture gain of the kidney beans during soaking showed a similar pattern to volume increase. Water uptake and volume increase rates were in the decreasing order of PKB, RKB and WKB. Moisture and volume gains held a linear relation with the square root of soaking time regardless soaking temperatures. The activation energies of water uptake and volume increase were 3033~3087 and 3077~ 3161 kcal/mole, respectively. The log time to reach a fixed moisture content showed a linear relation with soaking temperature regardless soaking temperatures. The z-values calculated from weight and volume changes decreased in proportions to the increase of hydration. The z-values of weight and volume to reach 50% hydration were 50.5~56.6$^{\circ}C$ and 48.4~61.2$^{\circ}C$, respectively.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.615-625
• /
• 2011

This study presents a descriptive statistical analysis on grade characteristics and employment rates of three ocean-related departments at a university. The ocean-related departments belong to the same college along with the other six departments. To obtain the correlation between the grade characteristics and employment rates, we carried out the followings. Firstly, four-year employment rates and six-semester GPAs (grade point averages) were obtained from the nine departments. Secondly, the box-and-whisker plots were constructed for each data set to capture the grade characteristics (mean, the first quartile, median, third quartile, whisker+, and Q3 box). Finally, the grade characteristics and employment rates were correlated. It is shown from the correlation analysis that the employment rate has a positive linear relation with the mean or third quartile, while the rate has a negative linear relation with the whisker+ or Q3 box, for the ocean-related departments possibly because these departments have higher regular employment rates than those of the other six departments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.111-114
• /
• 2008

Explicit solutions of the wave dispersion equation are developed using the recursive relation in terms of the relative water depth. We use the solutions of Eckart (1951), Hunt (1979), and the deep-water and shallow-water solutions for initial values of the solution. All the recursive solutions converge to the exact one except that with the initial value of deep-water solution. The solution with the initial value by Hunt converged much faster than the others. The recursive solutions may be obtained quickly and simply by a hand calculator. For the transformation of linear water waves in whole water depth, the use of the recursive solutions will yield more accurate analytical solutions than use of previously developed explicit solutions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.7 s.250
• /
• pp.757-764
• /
• 2006

Isothermal cyclic stress-strain deformation and thermomechanical deformation (TMD) of 429EM stainless steel were analyzed using a rheological model employing a bi-linear model. The proposed model was composed of three parameters: elastic modulus, yield stress and tangent modulus. Monotonic stress-strain curves at various temperatures were used to construct the model. The yield stress in the model was nearly same as 0.2% offset yield stress. Hardening relation factor, m, was proposed to relate cyclic hardening to kinematic hardening. Isothermal cyclic stress-strain deformation could be described well by the proposed model. The model was extended to describe TMD. The results revealed that the hi-linear thermomechanical model overestimates the experimental data under both in-phase and out-of-phase conditions in the temperature range of $350-500^{\circ}C$ and it was due to the enhanced dynamic recovery effect.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.206-211
• /
• 2004

This paper deals with the flexural strengthening of reinforced concrete beams by means of thin fiber reinforced plastic(FRP) laminas. This study focuses on modeling of structural of concrete bonded FRP laminate in flexural bending members. Used computational equation is derived by relation of stress and strain. The section analysis is based on experimental observations of a linear strain distribution in the cross section until failure, and a multi-linear moment-deflection curve that is divided into four regions, each terminated by a similarly numbered point. The load-deflection relationship in each region is assumed to be linear. The present model is validated to compare wit the experiment of 4-point bending tests of R/C rectangular beams strengthened with CFRP laminates, and has well predicted the moment-displacement relationships of members.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.29-43
• /
• 1997

An integrated optimal control modelhas been formulated to address dynamic freeway diversion control process. The purpose of this paper is to develop an effective and efficient approach for simultaneous]v solving optimal control measures, including on-ramp metering rates, off-ramp diversion rates, and g/C ratios for traffic signals, on a real-time basis. By approximating the flow-density relation with a two-segment linear function, the non-linear optimal control problem can be simplified into a set of piece-wised linear programming models and solved with the proposed SLP algorithm. consequently, an effective on-line feedback method has been developed for integrated freeway corridor control in the framework of the ITS

• Kyungpook Mathematical Journal
• /
• v.47 no.3
• /
• pp.381-392
• /
• 2007

In 1906, da Rios, a student of Leivi-Civita, wrote a master's thesis modeling the motion of a vortex in a viscous fluid by the motion of a curve propagating in $R^3$, in the direction of its binormal with a speed equal to its curvature. Much later, in 1971 Hasimoto showed the equivalence of this system with the non-linear Schr$\ddot{o}$dinger equation (NLS) $$q_t=i(q_{ss}+\frac{1}{2}{\mid}q{\mid}^2q$$. In this paper, we use the same idea as Terng used in her lecture notes but different technique to extend the above relation to the case of $R^3$, and obtained an analogous equation that $$q_t=i[q_{ss}+(\frac{1}{2}{\mid}q{\mid}^2+1)q]$$.