• 전기전자학회논문지
• /
• 제5권2호
• /
• pp.146-152
• /
• 2001

본 논문에서는 배전 계통에서 전압 파형 개선을 위하여 배전용 정지형 보상기(DSTATCOM)의 제어 기법 2가지를 보였다. 1선 지락 사고 시에 제시한 방법을 이용한 시뮬레이션을 통해 선로 전압 파형이 개선됨을 알 수 있다. 또한 비제어 및 PI 제어와 LQR 제어를 비교하였다. 요구되는 응답 특성 및 제어 효과에서 LQR 제어가 우수함을 보이고 PSCAD/EMTDC을 이용하여 검증하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.125-128
• /
• 2004

Q-learning은 강화학습의 한 방법으로서, 여러 분야에 널리 응용되고 있는 기법이다. 최근에는 Linear Quadratic Regulation (이하 LQR) 문제에 성공적으로 적용된 바 있다. 특히 시스템 모델의 파라미터에 대한 구체적인 정보가 없는 상태에서 적절한 입력과 출력만을 가지고, 학습을 통해 문제를 해결할 수 있어서 상황에 따라서 매우 실용적인 대안이 될 수 있다. 이에 따라 본 논문에서는 이러한 일반적인 LQR Q-learning(이하 LQRQL) 학습방법에 퍼지 모델을 이용하여 제어기를 설계하는 방법을 고려하고, 일반적인 LQROL 기법과 본 논문에서 제시한 방법의 결과를 비교하여 응용 가능성을 살펴보았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2240-2242
• /
• 2001

A rotary double inverted pendulum, the nonlinear system has a regulation problem. In this paper, we linearize the nonlinear system at the upright equilibrium position. The linearized system can be expressed in state space. To maintain the upright position, we design a feedback controller using LQR(Linear Quadratic Regulator) algorithm. Then we simulate the system with third-order Adams Bashforth Moulton Method. The simulated result shows that the applied algorithm is effective for the regulation problem.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1024-1031
• /
• 2013

This paper addresses linear quadratic regulation (LQR) for variable speed variable pitch wind turbines. Because of the inherent nonlinearity of wind turbines, a set of operating conditions is identified and then a LQR controller is designed for each of the operating points. The feedback controller gains are then interpolated linearly to get a control law for the entire operating region. In addition, the aerodynamic torque and effective wind speed are estimated online to get the gain-scheduling variable for implementing the controller. The potential of this method is verified through simulation with the help of MATLAB/Simulink and GH Bladed. The performance and mechanical load when using LQR are also compared with those obtained when using a PI controller.

• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.147-168
• /
• 2011

To ensure safety and long term performance, structural control has rapidly matured over the past decade into a viable means of limiting structural responses to strong winds and earthquakes. Nonlinear response history analysis requires rigorous procedure to compute seismic demands. Therefore the simplified nonlinear analysis procedures are useful to determine performance of the structure. In this investigation, application of improved capacity demand diagram method in the control of structural system is presented for the first time. Developed pole assignment method (DPAM) in structural systems control is introduced. Genetic algorithm (GA) is employed as an optimization tool for minimizing a target function that defines values of coefficient matrices providing the placement of actuators and optimal control forces. The ground acceleration is modified under induced control forces. Due to this, performance of structure based on improved nonlinear demand diagram is selected to threshold of nonlinear behavior of structure. With small energy consumption characteristics, semi-active devices are especially attractive solutions for limiting earthquake effects. To illustrate the efficiency of DPAM, a 30-story steel moment frame structure employing the semi-active control devices is applied. In comparison to the widely used linear quadratic regulation (LQR), the DPAM controller was shown to be just as effective and better in the reduction of structural responses during large earthquakes.

• 한국항공우주학회지
• /
• 제50권2호
• /
• pp.103-110
• /
• 2022

악천후나 기계적 결함에 의한 비행성(Handling Qualities) 저하는 그 상황에 익숙하지 못한 조종사에게 치명적인 위험을 줄 수 있다. 특히 결빙의 경우에는 실제로 사고가 빈번하게 일어나는 원인인 만큼 중요하게 고려해야 할 사안이다. 대다수의 기존 연구들은 결빙에 따른 공기역학적 성능 변화와 그에 따른 모델링 방법을 제시하거나 결빙을 방지하는 방법을 주로 다루었으나, 본 연구에서는 전기체(full-scale) 헬리콥터에 발생하는 결빙으로 인한 비행 성능 저하를 능동적으로 보상하는 비행제어기를 설계하고자 한다. 본 연구에서는 먼저 UH-60 헬리콥터에 발생하는 결빙으로 인한 비행성 저하를 CONDUIT이라는 프로그램을 통해 보이고, 이러한 비행성 저하를 보상하기 위해 RS-LQR(Robust Servomechanism Linear Quadratic Regulation) 기법을 사용한 강인 제어기를 설계하였다. 시뮬레이션을 통해 제안한 강인 제어기가 헬리콥터가 결빙된 상황에서도 Level 1 비행성을 유지하는 것을 보였다.

• 풍력에너지저널
• /
• 제2권1호
• /
• pp.74-81
• /
• 2011

This paper deals with the application of LQ control to the power curve tracking control of wind turbine. However, two more additional tasks are required to apply the LQR theory to wind turbine control. One is the tracking problem instead of regulation, because the wind turbine is controlled as variable speed and variable pitch. The other is LQ integral control., because the rotor speed should be tightly controlled without any steady state error. Starting from the analysis of wind characteristics, design requirement of a wind turbine control system is defined. A design procedure of LQ tracking with integral control is introduced. The performance of LQ tracking system is analyzed and evaluated by numeric simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2170-2172
• /
• 2003

This paper presents the position tracking control of an inverted pendulum on an inclined railway. In general, inclining the railway leads to errors in the pendulum angle even though the pendulum is stabilized, which results in errors in the cart position. To solve this problem, a linear quadratic regulation (LQR) controller with an integrator is used for compensating the resulting error in the cart position. The proposed method is evaluated by comparing LQR controllers with and without an integrator. Experimental results show that the LQR controller with an integrator is better in performance than one without an integrator.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.99-107
• /
• 2003

In a winding process, important control specifications include regulation of web tension and velocity. In this research, an adaptive controller has been developed for controlling web tension and velocity in winding processes. For the controller design, the linear quadratic regulator theory has been adopted and a gain-scheduling scheme has been incorporated. A prototype winding system has been constructed, and the controller has been implemented in a real-time PC-based environment. The performance of the closed loop system has been evaluated via simulation and experiments, and it was observed that both the web tension and velocity could be regulated within a small tolerance.

• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.557-572
• /
• 2004

Control systems are used to limit structural lateral deflections during large external loads such as winds and earthquakes. Most recently, the semi-active control approach has grown in popularity due to inexpensive control devices that consume little power. As a result, recently designed control systems have employed many semi-active control devices for the control of a structure. In the future, it is envisioned that structural control systems will be large-scale systems defined by high actuation and sensor densities. Decentralized control approaches have been used to control large-scale systems that are too complex for a traditional centralized approach, such as linear quadratic regulation (LQR). This paper describes the derivation of energy market-based control (EMBC), a decentralized approach that models the structural control system as a competitive marketplace. The interaction of free-market buyers and sellers result in an optimal allocation of limited control system resources such as control energy. The Kajima-Shizuoka Building and a 20-story benchmark structure are selected as illustrative examples to be used for comparison of the EMBC and centralized LQR approaches.