• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.536-547
• /
• 1994

본 논문에서는 최적제어기법을 이용한 원자로 출력 제어시스템을 다루었다. 시스템 변수들을 상태변수로 표시하면 관측치 뿐만 아니라 시스템 내부의 모든 상태변수를 동시에 다룰 수 있으므로 설계의 자유도가 증가될 수 있다. 따라서 본 논문에서는 원자로의 동특성식과 열수력학적 에너지 평형식을 사용하여 원자로를 모델링한 후 이를 상태변수로 나타내었다. 다음으로는 LQR 및 LQG 시스템을 설계하여 제어봉 및 출력의 거동을 동시에 만족시킬 수 있는 설계조건을 결정하였다. 또한 서보 시스템의 설계를 위해 보통의 휘드백 시스템과 차수를 증가시킨 레귤레이팅 시스템을 만들어 비교하였으며 그 결과 증가차수 레귤레이팅 시스템이 보통의 휘드백 시스템에 비해 우수한 제어 특성이 있음을 알 수 있었다.

• 한국게임학회 논문지
• /
• 제9권5호
• /
• pp.137-144
• /
• 2009

이 논문은 피하산란의 정도가 다를 것으로 예상되는 얼굴의 6개의 부위를 촬영하여 각각의 산란특성을 추출하고 렌더링에 반영하여 얼굴의 사실감 있는 표현이 가능한 방법을 제안한다. 각 부위별 산란이미지는 프로젝터로부터 피부에 입사된 단위광선이 내부 산란을 거쳐 밖으로 드러나는 모양을 여러 노출로 촬영하여 HDR 이미지로 합성하고, 비선형 최소제곱합의 해법 중 Sequential Quadratic Programming을 이용하여 광선의 입사지점을 지나는 단면이 이루는 곡선에 '가우스 함수의 선형결합'을 적합한다. 가우스 함수는 산란곡선을 잘 근사하면서 필터로서 적용이 쉬운 장점을 가진다. 우리는 최소제곱합의 해가 지역 해에 빠지는 않도록 유전알고리듬을 이용해 초기 값을 설정한다. 근사된 식의 각 가우스 항은 얼굴에 입사되는 복사조도를 렌더링한 텍스처에 가우스 필터로 적용되어 피하산란효과를 표현. 이 논문에서는 최대 12회의 가우스 필터링을 효율적으로 처리하기 위해 쿠다의 병렬처리능력를 활용하였다.

• 대한의용생체공학회:의공학회지
• /
• 제33권2호
• /
• pp.65-71
• /
• 2012

In this paper, the Gaussian Mixture Model(GMM) which is very robust modeling for pattern classification is proposed to classify wrist motions using surface electromyograms(EMG). EMG is widely used to recognize wrist motions such as up, down, left, right, rest, and is obtained from two electrodes placed on the flexor carpi ulnaris and extensor carpi ulnaris of 15 subjects under no strain condition during wrist motions. Also, EMG-based feature is derived from extracted EMG signals in time domain for fast processing. The estimated features based in difference absolute mean value(DAMV) are used for motion classification through GMM. The performance of our approach is evaluated by recognition rates and it is found that the proposed GMM-based method yields better results than conventional schemes including k-Nearest Neighbor(k-NN), Quadratic Discriminant Analysis(QDA) and Linear Discriminant Analysis(LDA).

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.845-851
• /
• 2013

In this paper, a robust optimization approach is applied to the two-axes stage using a piezoelectric actuator for precise motion tracking. Robust control is based on LQG/LTR (linear quadratic Gaussian control with loop transfer recovery) control. Further, an LMI (linear matrix inequality) is used to find the optimal parameter in the loop transfer recovery step, instead of a trial and error method. A decoupler in the shape of FIR filter is added to reduce the coupling effect between the motions of the two axes, and hence, the feedback control loop is designed independently for each axis motion. The experimental result shows that the proposed control scheme can be applied effectively for motion control of the two-axes stage.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.729-735
• /
• 2012

A LQG/LTR(linear quadratic Gaussian/loop transfer recovery) controller with an integrator is designed to control the electro-hydraulic positioning system. Without considering the nonlinearity in the dead-zone, computer simulations are performed and show good performances and tracking abilities with the feedback controller based on the linear system model. However, the performance of the closed loop hydraulic positioning system shows big steady-state error in real system because of the dead-zone. In this paper, the feedback controller with a nonlinear compensator is introduced to overcome the dead-zone phenomenon in hydraulic systems. The inverse dead-zone as a nonlinear compensator is used to cancel out the dead-zone phenomenon. Experimental tests are performed to verify the performance of the controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.81-84
• /
• 1996

We propose the robust nonlinear controller design methodology, the $H_{\infty}$ constrained quasi - linear quadratic Gaussian control (QLQG/ $H_{\infty}$), for the statistically-linearized multivariable system with hard nonlinearties such as Coulomb friction, deadzone, etc. The $H_{\infty}$ performance constraint is involved in the optimization process by replacing the covariance Lyapunov equation with the Riccati equation whose solution leads to an upper bound of the QLQG performance. Because of the system's nonlinearity, however, one equation among three Riccati equations contain the nonlinear correction terms that are very difficult to solve numerically. To treat this problem, we use simple algebraic techniques. With some analytic transformation for Riccati equations, the nonlinear correction terms can be so eliminated that the set of a linear controller to the different operating points are designed. Synthesizing these via inverse random input describing function (IRIDF) technique, the final nonlinear controller can be designed.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.157-163
• /
• 2014

In this paper, a robust MRAC (model reference adaptive control) scheme is applied to control an electrohydraulic positioning system under various loads. The inverse dead-zone compensator in the control system cancels out the dead-zone response, and an integrator added to the controller provides good position-tracking ability. LQG/LTR (linear quadratic Gaussian control with loop transfer recovery) closed-loop model is used as the reference model for learning the MRAC system. LQG/LTR provides a systematic technique to design the linear controller that optimizes the objective function using some compromise between the control effort and the system performance in the frequency domain. Different external load tests are performed to investigate the effectiveness of the designed MRAC system in real time. The experimental results show that the tracking performance of the proposed system is highly accurate, which offers considerable robustness even with a large change in the load.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.614-619
• /
• 2012

A LQG/LTR(Linear Quadratic Gaussian/Loop Transfer Recovery) controller with an integrator is designed to control the electro-hydraulic positioning system. Without considering the nonlinearity in the dead-zone, computer simulations are performed and show good performances and tracking abilities with the feedback controller based on the linear system model. However, the performance of the closed loop hydraulic positioning system shows big steady-state error in real system because of the dead-zone. In this paper, the feedback controller with a nonlinear compensator is introduced to overcome the dead-zone phenomenon in hydraulic systems. The inverse dead-zone as a nonlinear compensator is used to cancel out the dead-zone phenomenon. Experimental tests are performed to verify the performance of the controller.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.49-58
• /
• 1997

In this paper, a transfer function was obtained for a PWM high speed solenoid valve controlled metal belt CVT system. The transfer function was defined as the ratio of speed ratio to PWM duty ratio and derived in time domain by linear regression analysis from the experimental results. The transfer function obtained showed different dynamic characteristics for the up and down shift. Also, LQG/LTR controller was designed for the CVT system using the transfer function. It is seen from the experimental results that LQG/LTR control showed good performance for the speed ratio tracking and disturbance rejection. The phase difference and relatively slow response are considered due to the inaccuracy os the transfer functions, which resulted from the inherent nonlinearities of the transmission characteristics of the metal belt CVT.

• Earthquakes and Structures
• /
• 제6권3호
• /
• pp.281-300
• /
• 2014

This study proposes a scheme to design control parameters for a data center facility with a vibration controller on its top floor and a secondary isolation device with its own vibration controller designed to protect vibration-sensitive computer equipment. The aim is to reduce the effects of acceleration and drift from an earthquake on computer servers placed on the isolation device that must operate during a seismic event. A linear elastic model is constructed and the evaluation function of the linear quadratic Gaussian (LQG) control is formulated. The relationship between the control parameters and the responses is examined, and based on the observations, a control parameter design scheme is constructed to reduce the responses of both the building and the computer server effectively.