• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.169-171
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer(MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we simulated such potential phase errors in the optimized MTI.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.88-96
• /
• 1997

This paper suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteresis nonlinear element which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. A proper Lyapunov function is selected and the Lyapunov direct method is used to prove the asymptotic stability of the suggested control.

• Journal of the Optical Society of Korea
• /
• 제11권1호
• /
• pp.10-17
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer (MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we analyzed such potential phase errors in the optimized MTI.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.987-993
• /
• 1996

This report suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteric nonlinear clement which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. The Lyapunov direct method is used to prove the asymtotic stability of the suggested control, and the stability and the effectiveness are verified analytically and experimentally on a single axis servo driving system.

• Journal of the Optical Society of Korea
• /
• 제9권4호
• /
• pp.145-150
• /
• 2005

The method to obtain four speckle patterns with relative phase shift of $\pi$/2 by passive devices such as two waveplates and a linear polarizer, and to calculate the phase at each point of the speckle pattern in shearography with a Wollaston prism is described. In this paper, we analyze its potential error sources caused by wave plates.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.850-855
• /
• 2008

This paper suggests a new linear motor which is able to levitate as well as move its mover without any linear bearing or even additive windings. Its structure is very similar to a well-known both-sided linear motor which consists of two stators and a common mover. And the movement principle is the same with that of conventional linear motor. But unlike the conventional one, the amplitudes of phase currents are controlled to levitate the mover. In this paper, the structure and principle of the suggested bearingless linear motor are introduced in detail and its feasibility is experimentally investigated. Using the prototype and a very simple controller, we succeeded in the levitation and linear movement of the mover at a time.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.257-262
• /
• 2001

In this paper, a linear ultrasonic motor using piezoelectric ceramics was fabricated, and its operation characteristics were investigated. A linear ultrasonic motor using L$_1$-B$_4$model was composed of a stator and a rotor, and a stator was composed of piezoelectric ceramics and a elastic body. When applied frequency and voltage were 58.4kHz and 56V respectively, the feeding speed of the motor was 19.8 cm/s. A linear ultrasonic motor could be moved in left and right directions by the phase difference. Feeding speed and feeding force of a linear ultrasonic motor could be controlled by applied voltage. A linear ultrasonic motor had a droping torque-speed characteristic. The maximum efficiency of linear ultrasonic motor was 2.14%. Therefore, this linear ultrasonic motor can be expected to be used for a card-forwarding device, such as a card reader device and so on.

• 열처리공학회지
• /
• 제14권5호
• /
• pp.286-291
• /
• 2001

This study was carried out to investigate the influence of ${\sigma}$ phase on the microstructure and mechanical properties in super duplex stainless steel. The precipitation of ${\sigma}$ phase during isothermal heat treatment showed the type S curves with a certain incubation period. The precipitation of ${\sigma}$ phase was precipitated at ferrite phase and interface of ferrite and austenite. Under the state of isothermal transformation, the precipitation of ${\sigma}$ phase was stimulated by applied stress. With increasing of volume fraction of precipitated ${\sigma}$ phase, tensile strength was increased and elongation was decreased with linear relationship, while in case of precipitated ${\sigma}$ phase was 5% over, impact value was rapidly decreased.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.5-18
• /
• 1997

일반적으로 포화지반의 동적거동을 정확히 예편하기 위해서는 다공성(multi-phase) 재료모델과 그 모델을 이용하는 수치해석 프로그램의 개발이 필요하다. 본 논문에서는 높은 동하중을 받는 다공질 재료의 이론적인 거동해석 연구결과와 함께 기존 MPDAP(multi-phase dynamic analysis program)에 JWL(Jones-Withins-Lee) 모델을 삽입시켜 개발한 MPDAP에 대해 다루었다. JWL모델은 기존 모델과는 달리 폭약의 종류 및 특성 등을 고려할 수 있는 모델이다. 또한 본 논문에서는 개발된 프로그램의 적합성을 조사하기 위하여 몇몇 예제에 대한 검증해석을 수행하였다. 검증결과, 단일매체 (single-phase medium)에서의 탄성구형파의 전파특성 해석의 경우 해석결과와 이론해는 거의 일치하는 결과를 나타내었고, 일차원 선형 압밀해석의 경우과잉 간극수압은 Terzaghi의 이론해와 해석된 결과가 비교적 일치하는 경향성을 보여 주었다. 또한 포화지반에서의 평면 압축파 해석의 경우도 해석결과와 이미 검증된 프로그램 또는 완전해의 해석결과는 거의 유사하게 나타나는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.263-265
• /
• 2007

An ultrasonic linear motor using lambda shape vibrators has been designed and fabricated. The multiway ultrasonic motors mainly consist of an lambda shape ultrasonic vibrator which generates elliptical motions in beat. The lambda shape ultrasonic linear motor use longitudinal and bending vibration mode. In order to high precision motion control and multiway moving, piezoceramics were adhered to lambda shape brass elastic material. The finite element method was used to optimize dimension of ultrasonic vibrator and direction of vibratory displacement. As a result of estimating the characteristics of the ultrasonic linear motor, The results have shown that the lambda shape ultrasonic linear motor can be moved multiwav by using the phase control. Close agreement between the FEM results and experimental results obtained for the lambda shape ultrasonic linear motor.