• International Journal of Control, Automation, and Systems
• /
• v.4 no.4
• /
• pp.456-465
• /
• 2006

The problem of recursive filtering far linear discrete-time systems with uncertainties is considered. A new suboptimal filtering algorithm is herein proposed. It is based on the fusion formula, which represents an optimal mean-square linear combination of local Kalman estimates with weights depending on cross-covariances between local filtering errors. In contrast to the optimal weights, the suboptimal weights do not depend on current measurements, and thus the proposed algorithm can easily be implemented in real-time. High accuracy and efficiency of the suboptimal filtering algorithm are demonstrated on the following examples: damper harmonic oscillator motion and vehicle motion constrained to a plane.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.314-316
• /
• 2001

This paper present the position control method for the application of permanent magnet linear synchronous motor. Controller is designed as a conventional P-PI controller, but the extra information is used such as velocity and acceleration from motion profiles. The profiles comes from S-Curve which is an optimized point-to-point motion profiles to achieve fast motions with minimum vibration[2]. In this application, the targets of the position control are maximum 10um position error within 10msec after respective ending point of position profiles. The implementation of the controller has been done in full digital way. All the controller is designed on the DSP TMS320VC33 control board. To prove performance of the controller, the experiment was performed with a servo linear motor.

• Journal of Power Electronics
• /
• v.11 no.5
• /
• pp.697-703
• /
• 2011

In this paper a control system with a high performance dynamic response for linear induction motors (LIMs) is proposed which takes into account the end-effect in both the machine model and the control system. Primary flux oriented control has two major drawbacks i.e. a lack of decoupling of the thrust and the flux and a possibility of system instability due to the end-effect. Both of these drawbacks have been dealt with in this paper. A flux estimation method is proposed to correct the flux orientation error caused by the end effect. Extensive motor performance evaluations under the proposed control system prove its superiority over conventional vector control.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.759-767
• /
• 2006

The level-of-detail (LoD), which is a method of reducing polygons on mesh, is one of the most fundamental techniques in real-time rendering. In this paper, we propose a novel level-of-detail technique applied to the virtual character's motion (Motion LoD). The movement of a virtual character can be defined as the transformation of each joint and it's relation to the mesh. The basic idea of the proposed 'Motion LoD' method is to reduce number of joints in an articulated figure and minimize the error between original and simplified motion. For the motion optimization, we propose an error estimation method and a linear system reconstructed from this error estimation for a fast optimization. The proposed motion simplification method is effectively useful for motion editing and real-time crowd animation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.314-320
• /
• 2012

This paper proposes a new robust motion deblurring filter using the inertial sensor measurements for strapdown image IR applications. With taking the PSF measurement error into account, the motion blurred image is modeled by the linear uncertain state space equation with the noise corrupted measurement matrix and the stochastic parameter uncertainty. This motivates us to solve the motion deblurring problem based on the recently developed robust least squares estimation theory. In order to suppress the ringing effect on the deblurred image, the robust least squares estimator is slightly modified by adoping the ridge-regression concept. Through the computer simulations using the actual IR scenes, it is demonstrated that the proposed algorithm shows superior and reliable motion deblurring performance even in the presence of time-varying motion artifact.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.190-193
• /
• 2001

This paper describes the reduction of vibration and position error of Linear Pulse Motor(LPM) with the control method of PWM duty ratio by using Motion Controller in LPM. The LPM is operated on micro-stepping drive, that the linear scale is sequently returned the position signals of a micro-meter And next micro-step is controlled with the scale factor when position error is occurred. The scale factor is experimently acquired.

• Structural Engineering and Mechanics
• /
• v.67 no.6
• /
• pp.603-616
• /
• 2018

In this study, the acceleration vector in each time step is assumed to be a mth order time polynomial. By using the initial conditions, satisfying the equation of motion at both ends of the time step and minimizing the square of the residual vector, the m+3 unknown coefficients are determined. The order of accuracy for this approach is m+1, and it has a very low dispersion error. Moreover, the period error of the new technique is almost zero, and it is considerably smaller than the members of the Newmark method. The proposed scheme has an appropriate domain of stability, which is greater than that of the central difference and linear acceleration techniques. The numerical tests highlight the improved performance of the new algorithm over the fourth-order Runge-Kutta, central difference, linear and average acceleration methods.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.562-572
• /
• 1992

In this paper, we propose software algorithms which provide acceleration/deceleration characteristics essential to high dynamic performance at the transient states where industrial robots or CNC machine tools start and stop. Software acceleration/deceleration methods are derived from the mathematical analyses of typical hardware systems controlling acceleration/deceleration. These methods make servo motors, which drive axes of motion, start and stop smoothly without vibration in the repeated tools. The path error, which is one of the most significant factors in the performance evaluation of industrial robots or CNC machine tools, is analyzed for linear, exponential, and parabolic acceleration/deceleration algorithms in case of circular interpolation. The analyses show that path error consists of the distance between the required path and generated one through acceleration/deceleration, and that between the generated one through acceleration/deceleration algorithm and the actual one of the end effector of the industrial robot or tool of the CNC equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.79-86
• /
• 2012

This paper proposes PID and RIC (Robust Internal-loop Compensator) based motion controller using dual learning algorithm for position control of linear synchronous motor respectively. Its gains are auto-tuned by using two learning algorithms, reinforcement learning and neural network. The feedback controller gains are tuned by reinforcement learning, and then the feedforward controller gains are tuned by neural network. Experiments prove the validity of dual learning algorithm. The RIC controller has better performance than does the PID-feedforward controller in reducing tracking error and disturbance rejection. Neural network shows its ability to decrease tracking error and to reject disturbance in the stop range of the target position and home.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.21-29
• /
• 2010

The main purpose of this study is to obtain linear models for the design of automatic flight controller in order to operate the Light Sport Aircraft as unmanned air vehicle. Flight test equipments installed on the aircraft to acquire flight test data are described and maneuvers for practical speed calibration are introduced. Parameters for the linear models of lateral and longitudinal motion are estimated by the Output error method as well as trim data analysis using the flight test data. Simulated data using the estimated parameters is shown to agree well with the measurement data. Estimated parameters obtained for several flight conditions can be used to improve the aerodynamic database of the simulation program.