• 대한수학회논문집
• /
• 제39권2호
• /
• pp.279-302
• /
• 2024

In this paper, we summarise and present results on involution lengths and commutator lengths of certain linear groups such as special linear groups, projective linear groups, upper triangle matrix groups and Vershik-Kerov groups. Some open problems motivated by these results are also proposed.

• 대한수학회보
• /
• 제35권4호
• /
• pp.719-726
• /
• 1998

In this paper, we consider conjugacy of subgroups of some split metacyclic groups of odd prime power order to determine the numbers of conjugacy classes of subgroups of those groups. The study was motivated by the linear isomorphism problem of metacyclic primitive linear groups.

• Interaction and multiscale mechanics
• /
• 제5권1호
• /
• pp.57-73
• /
• 2012

The paper presents the analysis of two groups of piles subjected to lateral loads incorporating the non-linear behaviour of soil. The finite element method is adopted for carrying out the parametric study of the pile groups. The pile is idealized as a one dimensional beam element, the pile cap as two dimensional plate elements and the soil as non-linear elastic springs using the p-y curves developed by Georgiadis et al. (1992). Two groups of piles, embedded in a cohesive soil, involving two and three piles in series and parallel arrangement thereof are considered. The response of the pile groups is found to be significantly affected by the parameters such as the spacing between the piles, the number of piles in a group and the orientation of the lateral load. The non-linear response of the system is, further, compared with the one by Chore et al. (2012) obtained by the analysis of a system to the present one, except that the soil is assumed to be linear elastic. From the comparison, it is observed that the non-linearity of soil is found to increase the top displacement of the pile group in the range of 66.4%-145.6%, while decreasing the fixed moments in the range of 2% to 20% and the positive moments in the range of 54% to 57%.

• 대한수학회보
• /
• 제58권1호
• /
• pp.225-234
• /
• 2021

Let D be a division ring and n > 1 be an integer. In this paper, it is shown that if D ≠ ��3, then every subpermutable subgroup of the general skew linear group GLn(D) is normal. By applying this result, we show that every subpermutable subgroup of the unit group (ℝG)∗ of the real group algebras RG of finite groups G is normal in (ℝG)∗.

• 응용통계연구
• /
• 제18권2호
• /
• pp.395-410
• /
• 2005

많은 수의 범주형 변수에 의한 대규모 분할표 분석을 위하여 차원축소(collapsibility) 성질을 이용한 분석 방법을 제안하였다. kullback-Leibler의 발산 측도(divergence measure)를 이용한 서로 완전한 연관을 갖는 변수그룹을 결정하는 방법을 제안하였으며, 제안된 방법에 의한 변수그룹은 주변 로그선형모형(marginal log-linear models)에 의하여 변수들간의 연관성을 식별할 수 있다. 제안된 방법의 적용 예로 데이터 마이닝에서 흔히 접할 수 있는 대규모 분할표 자료인 소비자들의 구매행위 분석을 위한 장바구니 자료의 분석 결과를 제시하였다.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제15권3호
• /
• pp.229-243
• /
• 2008

This paper is intended to clarify and verify two representation algorithms computing representations of elements of free groups generated by two linear fractional transformations. Moreover in practice some parts of the two algorithms are modified for computational efficiency. In particular the justification of the algorithms has been rigorously done by showing how both algorithms work correctly and efficiently according to inputs with some properties of the two linear fractional transformations.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.461-472
• /
• 1994

The purpose of this study was to evaluate the sealing ability according to types of spreader and compatibility of accessory cone used in lateral condensation method. 120 plastic blocks with canal preformed were instrumented with K-,H-files and Gates-Gllidden bur. Shaped plastic blocks were divided into six experimental groups according to spreader and accessory cone used in lateral condensation. Then they were obturated by lateral condensation method without -sealer. Six experimental groups were as follows: Group 1 : Filling with #30 spreader & #25 gutta-percha cone Group 2 : Filling with #30 spreader & Fine accessory cone Group 3 : Filling with #3 spreader & #25 gutta-percha cone Group 4 : Filling with #3 spreader & Fine accessory cone Group 5 : Filling with #20,#30 spreader & #25 gutta-percha cone Group 6 : Filling with #2, #3 spreader & Fine accessory cone All the blocks were stored in 100% humidor at room temperature for 2 days. Each block was placed in centrifuged for 20 minutes at 3,000 rpm. Apical leakage was mesured from the apical foramen to the most coronal level of- dye leakage in millimeter under a stereoscope. The data were analysed by ANOVA. The obtained results were as follows; 1. In groups using two spreaders(Group 5,6), the linear leakage was less than one spreader using groups(Group 1-4). 2. Tn groups using two spreaders(Group 5,6), there was no significant difference in linear leakage between standardized -spreader group and non standardized group (p>0.01). 3. When one spreader was used(Group 1-4), standardized-spreader groups showed less linear leakage than nonstandardized spreader groups(P<0.01). 4. In case of using same spreader(Groupl,2 & Group 3,4), there was no significant difference in linear leakage according to accessory cone type. 5. It needs to use one more spreaders to increase apical sealability.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.671-684
• /
• 1995

The purpose of this study was to compare the apical sealing ability, overfilling and obturation of lateral canals using two gutta-percha techniques: Thermafil obturators and cold lateral condensation. Eighty numbered epoxide blocks with one major and five lateral canals were divided into four experimental groups and obturated according to experimental groups. Four experimental groups were as follows: Group 1 : Filling with Thermafil plastic obturators and sealer(ThermaSeal) Group 2 : Filling with Thermafil plastic obturators only, without sealer(ThermaSeal) Group 3 : Fillng using lateral condensation with sealer(AH-26) Group 4 : Fillng using lateral condensation without sealer(AH-26) All the blocks were stored in 100% relative humidor at room temperature for 7 days. Each block was placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. Apical leakage was measured from the apical foramen to the most coronal level of dye penetration in millimeter under a stereoscope. The length of gutta-percha and sealer in each of the lateral canals was measured, too. The presence or absence of overfilling of gutta-percha and sealer was recorded. The data was analyzed by one-way ANOVA. The obtained results were as follows: l. Apical dye leakage was almost: not occurred in Group Willed with Thermafil and sealer) and Group 3(filled using lateral condensation with sealer), and there was no significant difference in linear leakage between two groups(p>0.01). 2. In both Thermafil and lateral condensation groups, linear leakage of Group I, 3(filled with sealer) was less than that of Group 2, 4(filled without sealer), and there was no significant difference in linear leakage between Group 1, 2, 3(p> 0.01). 3. Overfilling during obturation of Group 1, 2(filled with Thermafil) was more than Group 3, 4(filled using lateral condensation), and there was no significant difference between groups(p> 0.05). 4. Groups filled with Thermafil had significantly more gutta-percha than groups filled using lateral condensation in all lateral canals(p <0.01), the total length of gutta-percha and sealer found in all lateral canals were similar in Group 1 and Group 3.

• Journal of applied mathematics & informatics
• /
• 제19권1_2호
• /
• pp.231-240
• /
• 2005

We examine the Fibonacci length of certain centro-polyhedral groups and show that in some cases the lengths depend on tribonacci sequences. Further we obtain specific examples of infinite families of three-generator groups with constant, linear and (3-step) Wall number dependent Fibonacci lengths.

• 대한소아치과학회지
• /
• 제51권3호
• /
• pp.265-278
• /
• 2024

This study investigates the potential of cone-beam computed tomography (CBCT)-generated cephalograms as a replacement for conventional lateral cephalograms (LCs) in children and adolescents. This retrospective study included 60 individuals, equally divided into permanent and mixed dentition groups. Both groups underwent conventional LCs and CBCT scans on the same day. LCs were then derived from CBCT scans. The same examiner performed digital measurements twice, with a week's interval, identifying landmarks and obtaining 7 angular and 5 linear measurements. In the permanent dentition group, significant differences were observed between the two imaging modalities for 6 angular and 2 linear measurements. In the mixed dentition group, significant differences were observed for 3 angular and 2 linear measurements. However, none of these differences exceeded the clinically acceptable limit of 2.0° or 2.0 mm. No significant differences in any measurement were found between the two groups (p < 0.05). CBCT-generated LCs demonstrated comparable results with good reliability in both dentition groups, suggesting their potential as suitable alternatives for children and adolescents who require CBCT for clinical purposes.