• 한국통신학회논문지
• /
• 제34권7C호
• /
• pp.640-648
• /
• 2009

합산수열 발생기는 간단한 하드웨어 또는 소프트웨어로 구현될 수 있고, 주기와 선형복잡도가 높은 특정이 있어 유비쿼터스 시대의 이동환경 보안장치에 적합하다. 하지만 Dawson의 각개공격과 Golic의 상관성공격 및 Meier의 고속 상관성공격에 의해 취약성이 노출되었다. 본 논문에서는 CCC-NSG를 제안한다. CCC-NSG에서는 합산수열 발생기 형태의 $E_0 $알고리즘을 개선하여 선형 LFSR 중 일부를 비션형 NFSR로 교체하였고, 클럭을 랜덤화해서 순환 클럭 조절함으로서 출력되는 키 수열의 안전성 ($2^{128}$보안 레벨)을 높였다. 또한, 제안 알고리즘에 대한 안전성 분석 및 성능을 분석하였다.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.904-911
• /
• 2006

A modified energy method for the fretting wear of the steam generator tube is proposed to calculate the wear-out depth between the nuclear steam generator tube and its support. Estimation of fretting-wear damage typically requires a non-linear dynamic analysis with the information of the gap velocity and the flow density around the tube. This analysis is very complex and time consuming. The basic concept of the energy method is that the volume wear rate due to the fretting-wear phenomena Is related to work rate which is time rate of the product of normal contact force and sliding distance. The wearing motion is due to dynamic interaction between vibrating tube and its support structure, such as tube support plate and anti-vibration bar. It can be assumed that the absorbed work rate would come from turbulent flow energy around the vibrating tube. This study also numerically obtains the wear-out depth with various wear topologies. A new dissection method is applied to the multi-span tubes to represent the vibrational mode. It turns out that both the secondary side density and the normal gap velocity are important parameters for the fretting-wear phenomena of the steam generator tube.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.104-108
• /
• 2006

항공기나 위성에 탑재되어 지표면의 영상을 획득하기 위한 합성 개구 레이더의 영상 분해능은 거리 방향 분해능(Range Resolution)과 이에 수직한 방향의 분해능(Azimuth Resolution)으로 구분할 수 있다. 레이더 센서를 이용한 영상의 해상도를 향상시키기 위해서는 신호처리를 위한 첩 펄스를 광대역화 할 필요가 있으며, 본 논문에서는 고해상도의 영상을 획득 할 수 있는 디지털 첩 펄스 발생기를 설계하였다. 디지털 첩 펄스 발생기는 크게 AWG방식과 DDS방식으로 구분할 수 있으며 본 연구에서는 DDS방식의 첩 펄스 발생기로 선형 주파수 변조(LFM) 파를 발생시키는 300MHz 대역의 광대역 디지털 첩 펄스 발생기를 개발하였다. 개발된 첩 펄스 발생기는 거리 방향 분해능이 50cm 이상 되는 고해상도 영상 레이더 시스템을 구현할 수 있는 성능을 가진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1614-1616
• /
• 2000

The purpose of this study is to manufacture and test a thermoelectric generator which converts unused energy from close-at-hand sources, such as garbage incineration heat and industrial exhaust, to electricity. A manufacturing process and the properties of a thermoelectric generator are discussed before simulating the thermal stress and thermal properties of a thermoelectric module located between an aluminum tube and alumina plate. We can design the thermoelectric modules having the good properties of thermoelectric generation. Resistivity of thermoelectric module for thermoelectric generation consisting of 62 cells was $0.15{\sim}0.4{\Omega}$. The maximum power of thermoelectric generator using thermoelectric generating modules can be defined as temperature function, and in this case it can be analogized the linear relation between current and voltage characteristics as function of temperature. The thermoelectric generator using 128 generating modules was assembled with 4 parallel connected modules sets composed with 32 directly connected modules.

• Nuclear Engineering and Technology
• /
• 제41권6호
• /
• pp.841-848
• /
• 2009

A simple model to analyze non-linear density-wave instability in a sodium-cooled helically coiled steam generator is developed. The model is formulated with three regions with moving boundaries. The homogeneous equilibrium flow model is used for the two-phase region and the shell-side energy conservation is also considered for the heat flux variation in each region. The proposed model is applied to the analysis of two-phase instability in a JAEA (Japan Atomic Energy Agency) 50MWt No.2 steam generator. The steady state results show that the proposed model accurately predicts the six cases of operating temperatures on the primary and secondary sides. The sizes of three regions, the secondary side pressure drop according to the flow rate, and the temperature variation in the vertical direction are also predicted well. The temporal variations of the inlet flow rate according to the throttling coefficient, the boiling and superheating boundaries and the pressure drop in the two-phase and superheating regions are obtained from the unsteady analysis.

• 정보보호학회논문지
• /
• 제7권3호
• /
• pp.11-22
• /
• 1997

출력 수열의 수가 스트림암호의 새로운 평가요소로서 제안된 바 있으나 일반적으로 발표된 대부분의 이진 수열 발생기는 출력 수열이 1개 뿐인 것으로 알려졌다. 본 논문에서는 출력 수열의 수가 여러 개인 다수열 출력 이진 수열 발생기를 2가지 유형으로 제안하였다. 첫 번째는 여러개의 feedback tap중 하나를 초기키에 따라 선택하는 Switched-Tap LESR(STLFSR)과 이를 이용한 일반형 모델 및 Geffe 발생기의 적용 예를 제안하였다. 나머지는 다수열 출력 수열로 이미 알려진 golic의 메모리 수열발생기(MEM-BSG)를 개선하여 대용량 메모리 사용이 가능하도록 일반화시킨 대용량 메모리형 다수열 출력 발생기(GMEM-BSG)를 제안하고, 이 발생기의 주기, 선형복잡도 및 출력 수열의 수를 분석하였다.

• 대한방사성의약품학회지
• /
• 제7권2호
• /
• pp.119-125
• /
• 2021

⁸²Sr for ⁸²Rb generator was produced through the irradiation of the proton beam on the ^nat.RbCI target at the target irradiation facility installed at the end of the Rl-dedicated beamline of the 100 MeV proton linear accelerator of KOMAC (Korea Multi-purpose Accelerator Complex). The average current of the proton beam was 1.2 µA for irradiation time of 150 min. For the separation and purification of the ⁸²Sr from ^nat.RbCI irradiated, Chelex-100 resin was used. The activities of ⁸²Sr in the irradiated ^nat.RbCI target solution and after purification were 45.29 µCi and 43.4 µCi, respectively. The separation and purification yield was 95.8%. As an adsorbent to be filled in the generator for ⁸²Sr adsorption hydrous tin oxide was selected. The adsorption yield of ⁸²Sr into the generator adsorbent was > 99 %, and the total amount of ⁸²Sr adsorbed to the generator was 21.6 µCi as of the day of the ⁸²Rb elution experiment. When the elution amount was 22 mL, the maximum⁸²Rb elution yield was 93.3%, and the elution yield increased as the flow rate increased. After the eluted ⁸²Rb was filled in the correction phantom of the small PET for animals, a PET image was taken. The image scan time was set to 5 min, and the phantom PET image was successfully obtained. As results of impurity analysis on eluted ⁸²Rb using ICP-MS, ^nat.Rb stable isotopes that compete in vivo of ⁸²Rb were identified as undetected levels and were determined to be No-Carrier-Added (NCA).

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.21-28
• /
• 2006

Vibration of a non-linear system with multiple degrees of freedom under random parametric excitations was evaluated by probabilistic method. The non-linear characteristic terms of system structure were quasi-linearized and excitation terms were remained as they were. An analytical method where the expectation values of square mean of error was minimized was used. The numerical results were compared with those obtained by Monte Carlo simulation. A linear congruential generator and Box-Muller method were used in Monte Carlo simulation. The comparison showed the results by probabilistic method agreed well with those by Monte Carlo simulation.

• 경영과학
• /
• 제25권1호
• /
• pp.43-53
• /
• 2008

This paper considers a profit-based unit commitment problem with fuel consumption constraint and maintenance cost, which is one of the key decision problems in electricity industry. The nature of non-linearity inherent in the constraints and objective functions makes the problem intractable which have led many researches to focus on Lagrangian based heuristics. To solve the problem more effectively, we propose mixed integer programming based solution algorithm linearizing the complex non-linear constraints and objectives functions. The computational experiments using the real-world operation data taken from a domestic electricity power generator show that the proposed algorithm solves the given problem effectively.

• 한국통신학회논문지
• /
• 제29권7C호
• /
• pp.915-920
• /
• 2004

본 논문에서는 비주기 자기상관 특성의 중요한 지표가 되는 merit factor의 관점에서 가장 우수한 비주기 자기상관 특성을 갖는 새로운 다중 위상 부호열(polyphase sequence)을 제안한다. 또한, 정수 환(integer residue ring)에서 LFSR(Linear Feedback Shift Register)을 이용한 일반적인 다중 위상 부호열 생성기를 제안하고 제안된 생성기에 기반한 다중 위상 부호열의 선형 복잡도를 분석한다.