• Coupled systems mechanics
• /
• v.1 no.2
• /
• pp.155-163
• /
• 2012

This paper presents analytical approximate solutions for the initial post-buckling deformation of the pipes in oil and gas wells. The governing differential equation with sinusoidal nonlinearity can be reduced to form a third-order-polynomial nonlinear equation, by coupling of the well-known Maclaurin series expansion and orthogonal Chebyshev polynomials. Analytical approximations to the resulting boundary condition problem are established by combining the Newton's method with the method of harmonic balance. The linearization is performed prior to proceeding with harmonic balancing thus resulting in a set of linear algebraic equations instead of one of non-linear algebraic equations, unlike the classical method of harmonic balance. We are hence able to establish analytical approximate solutions. The approximate formulae for load along axis, and periodic solution are established for derivative of the helix angle at the end of the pipe. Illustrative examples are selected and compared to "reference" solution obtained by the shooting method to substantiate the accuracy and correctness of the approximate analytical approach.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1659-1663
• /
• 2006

A many-body master equation is constructed by incorporating stochastic terms responsible for chemical reactions into the many-body Smoluchowski equation. Two forms of Langevin-type of memory equations describing the time evolution of dynamical variables under the influence of time-independent perturbation with an arbitrary intensity are derived. One form is convenient in obtaining the dynamics approaching the steady-state attained by the perturbation and the other in describing the fluctuation dynamics at the steady-state and consequently in obtaining the linear response of the system at the steady-state to time-dependent perturbation. In both cases, the kinetics of statistical averages of variables is found to be obtained by analyzing the dynamics of time-correlation functions of the variables.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.358-360
• /
• 1996

LPM(Linear pulse motor) has made linear motions by itself. And the LPM has higher thrust force ratio to mass and more wide driving speed lunges comparing with the conventional rotating type motors. However, there are the thrust force ripples in the LPM, which are produced by the mechanical structures and nonlinear back emf. It makes to hesitate the practical applications of LPM. Especially, it becomes needed to reduce the thrust force ripples for practical, which needs relative low driving speeds. For reducing the thrust force ripples, in the first place, it was built a new nonlinear linkage flux equations of the LPM. In these equations, the influence of permanent magnetic and variable reluctance thrust force components were considered. In this paper, some experimental results in the modeling of LPM are shown and detent lone and holding force characteristics of LPM are measured.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.387-395
• /
• 1991

Large deflection behavior of cylindrically orthotropic thin circular plates is investigated by the numerical technique of differential quadrature. Governing equations are derived in terms of transverse deflection and stress function and a Newton-Raphson technique is used to solve the nonlinear systems of equations. For small values of degree of differential quadrature (N.leq.13), as the degree of differential quadrature increases, the center deflection converges. However, as N increases further, the center deflection diverges by ill-conditioning in the weighting coefficients. As the orthotropic parameter increases, the center deflection decreases and behaves linear for the loads. At center, the stress is affected mainly by orthotropic parameter, while the stress is affected mainly by boundary condition at edge.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.329-332
• /
• 1991

This paper presents an algorithm to reduce the time to solve Power Equations using a Neural Net. The Neural Net is trained with samples obtained through the conventional AC Load Flow. With these samples, the Neural Net is constructed and has the function of a linear interpolation network. Given arbitrary load level, this Neural Net generates voltage magnitudes and angles which are linear interpolation of real and reactive powers. Obtained voltage magnitudes and angles are substituted to Power Equations, Real and reactive powers are found. Thus, a new sample is generated. This new experience modifies weight matrix. Continuing to modify the weight matrix, the correct solution is achieved. comparing this method with AC Load flow, this method is faster. If we consider parallel processing, this method is far faster than conventional ones.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.178-183
• /
• 2000

An efficient Newton-GMRES algorithm is presented for computing two-dimensional steady compressible viscous flows on unstructured hybrid meshes. The scheme is designed on cell-centered finite volume method which accepts general polygonal meshes. Steady-state solution is obtained with pseudo-transient continuation strategy. The preconditioned, restarted general minimum residual(GMRES) method is employed in matrix-free form to solve the linear system arising at each Newton iteration. The incomplete LU fartorization is employed for the preconditioning of linear system. The Spalart-Allmars one equation turbulence model is fully coupled with the flow equations to simulate turbulence effect. The accuracy, efficiency and robustness of the presently developed method are demonstrated on various test problems including laminar and turbulent flows over flat plate and airfoils.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.99-106
• /
• 2000

A method of two and three dimensional orthogonal grid generation with control of spacing by using the covariant Laplace equation is Presented. An important feature of the methodology is its ability to control effectively the grid spacing especially near the boundaries still maintaining good orthogonality in whole field. The method is based on the concept of decomposition of the global transformation into consecutive transformation of an approximate conformal mapping and au auxiliary orthogonal mapping to have linear and uncoupled equations. Control of cell spacing is based on the concept of reference arc length, and orthogonal correction is performed in the auxiliary domain. It is concluded that the methodology can successfully generate well controlled orthogonal grids around bodies of 2 and 3 dimensional configurations.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.806_807
• /
• 2009

This paper deals with characteristic analysis on the Linear Switched Reluctance Motor with Interior Permanent Magnet (LSRM-IPM) according to the magnetization of permanent magnet. The governing equations and force equations are derived using analytical method for the suggested models. This paper compares the force characteristics in terms of three cases considering the position and size of permanent magnet.

• Journal of the Korean Society of Combustion
• /
• v.17 no.2
• /
• pp.17-23
• /
• 2012

In this study, thermoacoustic analysis model was developed in order to predict both eigenfrequencies and initial growth rate of combustion instabilities for lean premixed gas turbine combustors. As a first step, a model combustor and nozzle were selected and analytical linear equations for thermoacoustic waves were derived for a given combustion system. Then, methods showing how the equations can be used for analysis of the combustion instability were suggested. It was found that the prediction results showed a good agreement with the measurements. However, there were some limitation in growth rate predictions, which were related with over-simplification of flame structure, acoustic boundary conditions, and temperature distribution in the combustor.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.8 no.2
• /
• pp.23-38
• /
• 2004

We consider finite element methods applied to a class of quasi parabolic integro-differential equations in $R^d$. Global strong superconvergence, which only requires that partitions are quasi-uniform, is investigated for the error between the approximate solution and the Sobolev-Volterra projection of the exact solution. Two order superconvergence results are demonstrated in $W^{1,p}(\Omega)\;and\;L_p(\Omega)$, for $2\;{\leq}p\;<\;{\infty}$.