• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.841-846
• /
• 2002

We applies a seasonal ARIMA model to the timely forecasting in a line utilization and its confidence interval on the base of the past data of the line utilization that QoS of the network is greatly influenced by. And this paper proposes the learning algorithm of dynamic threshold in line utilization using the SARIMA model. We can find the proper dynamic threshold in timely line utilization on the various network environments and provide the confidence based on probability. Also, we have evaluated the validity of the proposed model and estimated the value of a proper threshold on real network. Network manager can overcome a shortcoming of original threshold method and maximize the performance of this algorithm.

• Korean Journal of Remote Sensing
• /
• v.19 no.5
• /
• pp.403-409
• /
• 2003

Since SPOT4 satellite contained VEGETATION 1 sensor launched, the noise in VEGETATION data was occasionally arisen a difficulty for the data traitement. Blind line noise types were studied in VEGETATION-l short wave infrared channel(SWIR). In order to provide a precis product, the procedure for removing this noise is strongly recommended. In the case that the blind values are clearly distinguished from contamination-free values a simple threshold method was applied, while a changeable threshold method was used for the blind value mixed with contamination-free values. New algorithm presented in this study is consists of two method for each type of SWIR blind. After removing blind line, there were again some residual pixels of blind, because the threshold is not determinated sufficiently low. Lower threshold could remove the blind line as well as the contamination-free pixels. Nevertheless, the results showed a good qualitative improvement as compared with other algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1153-1159
• /
• 2000

This paper applies a seasonal ARIMA model to the timely forecasting in a line utilization and its confidence interval on the base of the past data of the lido utilization that QoS of the network is greatly influenced by and proposes the prediction algorithm of threshold violation in line utilization using the seasonal ARIMA model. We can predict the time of threshold violation in line utilization and provide the confidence based on probability. Also, we have evaluated the validity of the proposed model and estimated the value of a proper threshold and a detection probability, it thus appears that we have maximized the performance of this algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.273-276
• /
• 1996

We propose a new method to extract valid lines from a visual image. Unsupervised clustering method is used to assign each line to any of the line groups according to its orientation. During the low-level image processing we use an adaptive threshold method to reduce human supervision and to automate the processing sequence. To reduce the misclassification rate and to suppress the superiors line support regions at the clustering stage, the adaptive threshold method is consistently applied. Performing principal component analysis on each line support region provides an efficient method of obtaining line equation. Finally we adopt the theory of robust statistics to guarantee the quality of each extracted line and to eliminate the lines of poor quality. We present the experimental results to verify our method. With the proposed method, one can extract the lines according to the internal orientation similarities and integrate the whole process into one adaptive procedure.

• The KIPS Transactions:PartB
• /
• v.13B no.4 s.107
• /
• pp.401-408
• /
• 2006

In this paper, we propose a new class of segmentation technique for feature extraction based on the statistical and regional classification at each vertical or horizontal line of digital image data. Data is processed and clustered at each line, different from the point or space process. They are designed to segment gray-scale sectional images using a horizontal and vertical line process due to their statistical and property differences, and to extract the feature. The techniques presented here show efficient results in case of the gray level overlap and not having threshold image. Such images are also not easy to be segmented by the global or local threshold methods. Line pixels inform us the sectionable data, and can be set according to cluster quality due to the differences of histogram and statistical data. The total segmentation on line clusters can be obtained by adaptive extension onto the horizontal axis. Each processed region has its own pixel value, resulting in feature extraction. The advantage and effectiveness of the line-cluster approach are both shown theoretically and demonstrated through the region-segmental carotid artery medical image processing.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.361-366
• /
• 2009

We propose the performance enhancing method optimization of an asynchronous 2.5 Gbps/1.25 Gbps optical subscriber network with inverse RZ (Return to Zero) coded downstream and NRZ (Non Return to Zero) upstream re-modulation by adjusting threshold level control of a receiver. We theoretically analyze the BER (Bit Error Rate) performance by modeling the occurrence of BER by simulation with MATLAB according to the types of downstream data. The results have shown that the normalized threshold level in an optical receiver could be saturated at 1/3 as the SNR (Signal to Noise Ratio) increases. The needed SNR for obtaining the BER $10^{-9}$ can be reduced by $\sim$5 dB by optimizing the normalized threshold level at 1/3 instead of by using the conventional receiver with threshold level of 0.5. The proposed system can be a useful technology for asynchronous optical access networks with asymmetric upstream and downstream data rates, because the improved minimum receiving power could replace a light source with a source with lower power and lower cost in an OLT (Optical Line Termination).

• Laser Solutions
• /
• v.2 no.3
• /
• pp.52-61
• /
• 1999

The laser induced forward transfer(LIFT) technique employs a pulsed laser to transfer parts of a thin metal film from an optically transparent target onto an arbitrary substrate in close proximity to the metal film on the target. In this work, a two-step method, the combination of LIFT process, in which a Au film deposited on the $Al_2$O$_3$ substrate by Nd:YAG laser and subsequent Au electroless metal plating on the by LIFT process generated Au seed, was presented. The influence of laser parameters, wavelength, laser power, film thickness and overlap ratio of pulse tracks, on the shapes of deposit and conductor line after electroless plating is experimentally studied. As a results, the threshold power densities for ablation, deposition and metallization were determined and comparison of threshold value between the wave length 1064nm and the second harmonic generated 532nm. In odor to determine a possible application in the electronic industry, a smallest conduct spot size, line width and isolated line space were generated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.1
• /
• pp.44-49
• /
• 2018

This study analyzed the Vulnerability of Network Communication devices when IEMI is coupled with the Network System. An Ultra Wide Band Generator (180 kV, 700 MHz) was used as the IEMI source. The EUTs are the Switch Hub and Workstation, which are used to configure the network system. The network system was monitored through the LAN system configuration, to confirm a malfunction of the network device. The results of the experiment indicate that a malfunction of the network occurs as the electric field increases. The data loss rate increases proportionally with increasing radiating time. In the case of the Switch Hub, the threshold electric field value was 10 kV/m for all conditions used in this experiment. The threshold point causing malfunction was influenced only by the electric field value. The correlation between the threshold point and pulse repetition rate was not found. However, in case of the Workstation, it was found that as the pulse repetition rate increases, the equipment responds weakly and the threshold value decreases. To verify the electrical coupling of the EUT by IEMI, current sensors were used to measure the PCB line inside the EUT and network line coupling current. As a result of the measurement, it can be inferred that when the coupling current due to IEMI exceeds the threshold value, it flows through the internal equipment line, causing a malfunction and subsequent failure. The results of this study can be applied to basic data for equipment protection, and effect analysis of intentional electromagnetic interference.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.23-27
• /
• 2008

Wireless sensor networks are emerging as a solution for a wide range of data gathering applications. The most difficult challenge for the design of sensor nodes is the need for significant reductions in energy consumption. The threshold methods which filter redundant and similar data can be used to save energy. In this paper, we propose the adaptive threshold method to effectively manage the energy in wireless sensor nodes. In the adaptive threshold method, wireless sensor nodes can change the thresholds dynamically as the sensing environments vary. The simulation results show that the adaptive threshold method works very effectively even when we experience the significant volatility in the data. This scheme can be used in order to monitor the malfunction in the equipment of semiconductor manufacturing line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.971-976
• /
• 2000

The main objective of this paper is to present the rain cell size distribution observed during squall line episodes in the Sudano-Sahelian region. The used data were collected during the EPSAT Program [Etude des Precipitation par SATellite (Satellites Study of Precipitation)] which has been developed since 1958, on an experimental area located near Niamey, Niger (2 10′32"E, 13 28′38"N). The data were obtained with a C-band radar and a network composed of approximately 100 raingages over a 10,000 $\textrm{km}^2$. In this work a culling of the squall line episodes was made for the 1992 rainy season. After radar data calibration using the raingage network a number of PPI (Plan Position Indicator) images were generated. Each image was then treated in order to obtain a series of radar reflectivity (Z) maps. To describe the cell distribution, a contouring program was used to analyze the areas with rain rate greater than or equal to the contour threshold (R$\geq$$\tau$). 24700 contours were generated, where each iso-pleth belongs to a predefined threshold. Computing each cell surface and relating its area to an equi-circle (a circle having the same area as the cell), a statistical analysis was made. The results show that the number of rain cells having a given size is an inverse exponential function of the equivalent radius. The average and median equivalent radii ate 1.4 and 0.69 In respectively. Implications of these results for the precipitation estimation using threshold methods are discussed.