• 대한의용생체공학회:의공학회지
• /
• 제16권3호
• /
• pp.271-278
• /
• 1995

An ECG data compression algorithM using max-min slope update is proposed and a real time 3 channel ECG transmission system is implemented using the proposed algorithm. In order to effectively compress ECG data, we compare a threshold value with the max-min slope difference (MMSD) which is updated at each sample values. If this MMSD value is smaller than the threshold value, then the data is compressed. Conversely, when the MMSD value is larger than threshold value, the data is transmitted after storing the value and the length between the data which is beyond previous threshold level. As a result, it can accurately compress both the region of QRS, P, and T wave that has fast-changing and the region of the base line that slope is changing slow. Therefore, it Is possible to enhance the compression rate and the percent roms difference. In addition, because of the simplicity, this algorithm is more suitable for real-time implementation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.690-697
• /
• 2000

The objective of this study is to develop a method that is able to realize autonomous traveling for tractor-like robot on the slope terrain. A neural network (NN) and genetic algorithms (GAs) have been used for resolving nonlinear problems in this system. The NN is applied to create a vehicle simulator that is capable to describe the motion of the tractor robot on the slope, while it is impossible by the common dynamics way. Using this vehicle simulator, a control law optimized by GAs was established and installed in the computer to control the steering wheel of tractor robot. The autonomous traveling carried out on a 14-degree slope had initial successful results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.210-220
• /
• 2005

We have analyzed the stability for cut-slopes at main street 3-2 line section in Pa-ju local industrial complex. After studying an additional boring test, laboratory test and face mapping etc., we have determined the extent of reinforcement, slope inclinations and soil strength parameter from the analysis of test results. After changing the inclination of slopes for ground limit and carrying out the analysis of slope stability, we applied the Mass Nailing Method to the site because of need for reinforcement to soil and weathered rock slopes. In slope for soft and hard rock sections, we also reinforced the sections that are difficult to obtain the safety without reinforcement in alteration zone.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권2호
• /
• pp.125-131
• /
• 2001

When the program voltage is applied to a word line, a part of the boosted channel charge in inhibited bit lines is lost due to the coupling between the string select line (SSL) and the adjacent word line. This phenomenon causes the program disturbance in the cells connected to the inhibited bit lines. This program disturbance becomes more serious, as the word line pitch is decreased. To reduce the word line coupling, the rising edge of the word-line voltage waveform was changed from a pulse step into a ramp waveform with a controlled slope. The word-line ramping circuit was composed of a timer, a decoder, a 8 b D/A converter, a comparator, and a high voltage switch pump (HVSP). The ramping voltage was generated by using a stepping waveform. The rising time and the stepping number of the word-line voltage for programming were set to $\mutextrm{m}-$ and 8, respectively,. The ramping circuit was used in a 512Mb NAND flash memory fabricated with a $0.15-\mutextrm{m}$ CMOS technology, reducing the SSL coupling voltage from 1.4V into a value below 0.4V.

• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.439-452
• /
• 2022

A forecast of slope behavior during catastrophic events, such as earthquakes is crucial to recognize the risk of slope failure. This paper endeavors to eliminate the significant supposition of predefined slip surfaces in the slope stability analysis, which questions the relevance of simple conventional methods under seismic conditions. To overcome such limitations, a methodology dependent on the slip line hypothesis, which permits an automatic generation of slip surfaces, is embraced to trace the extreme slope face under static and seismic conditions. The effect of earthquakes is considered using the pseudo-static approach. The current outcomes developed from a parametric study endorse a non-linear slope surface as the extreme profile, which is in accordance with the geomorphological aspect of slopes. The proposed methodology is compared with the finite element limit analysis to ensure credibility. Through the design charts obtained from the current investigation, the stability of slopes can be assessed under seismic conditions. It can be observed that the extreme slope profile demands a flat configuration to endure the condition of the limiting equilibrium at a higher level of seismicity. However, a concurrent enhancement in the shear strength of the slope medium suppresses this tendency by offering greater resistance to the seismic inertial forces induced in the medium. Unlike the traditional linear slopes, the extreme slope profiles mostly exhibit a steeper layout over a significant part of the slope height, thus ensuring a more optimized solution to the slope stability problem. Further, the susceptibility of the Longnan slope failure in the Huining-Wudu seismic belt is predicted using the current plasticity approach, which is found to be in close agreement with a case study reported in the literature. Finally, the concept of equivalent single or multi-tiered planar slopes is explored through an example problem, which exhibits the appropriateness of the proposed non-linear slope geometry under actual field conditions.

• 한국지반환경공학회 논문집
• /
• 제2권1호
• /
• pp.57-65
• /
• 2001

본 연구에서는 증축하천제방의 침투거동과 안정성을 평가하기 위하여, 증축부의 투수계수와 홍수시 강우로 인한 수위상승속도를 3가지 경우로 변화시켜 가면서 평행흐름조건에서 침투모형실험과 유한요소해석을 통한 침윤선 변화와 홍수직후의 수위급상승시 제체사면의 안정성을 분석하여 제체침식에 대한 사면의 불안정성을 검토하였다. 침투모형실험은 평행흐름조건에서 서로 다른 증축재료의 투수계수 $k_1$, $k_2$, $k_3$와 홍수시 발생 가능한 수위상승속도 $v_1$, $v_2$, $v_3$를 각각 변화시키며 수행되었다. 증축체제의 침투거동은 증축부의 투수계수가 클수록 초기 침투거리가 길고, 제체하류사면에 유출점이 점차로 상승하며 시간에 따른 안전율이 감소하면서 국부적인 붕괴로 이어지는 불안정한 침투거동을 보여준다. 또한, 제체사면의 붕괴양상은 수위상승속도가 증가할수록 붕괴발생높이와 붕괴깊이가 증가함을 보여준다.

• 천문학회보
• /
• 제22권
• /
• pp.12.1-12.1
• /
• 1997

• 한국학교수학회논문집
• /
• 제22권4호
• /
• pp.351-367
• /
• 2019

기울기는 직선의 가파른 정도를 나타내는 지표로 기초적인 개념이면서 동시에 고급 수학과 연결되는 중요한 수학적 개념이다. 본 연구는 교과서에서 기울기의 개념이 어떻게 제시되는지 알아보기 위해 교과서에서 제시한 기울기 개념 유형을 분석하였다. 본 연구를 위해 중학교 2학년 교과서 13종 일차함수 단원에서 기울기에 대한 도입 활동, 기울기 정의를 위한 약속, 교과서 예제에서 사용된 기울기 개념을 Stump(1999, 2001), Moore-Russo, Connor, & Rugg(2011)의 기울기 개념 유형에 따라 분석하였다. 연구 결과 중학교 2학년 교과서에서 기울기를 설명하거나 기울기 문제를 제시할 때 기울기의 개념 유형이 편향되어 사용하고 있는 것으로 나타났다. 또한 기울기에 대한 실생활 맥락이 빈약하게 제시되고 있으며, 기울기 개념의 도입시 그 유형이 시각적 측면에서 분석적 측면으로 변화가 나타났다. 본 연구는 향후 교육과정과 교과서에서 기울기 개념을 제시하는 방법에 대한 시사점을 제공하고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.18.1-18.9
• /
• 2016

Background: The aim of this study was to examine the relationship between improvements in lip asymmetry at rest and while smiling after orthognathic surgery in patients with skeletal class III malocclusion. Methods: This study included 21 patients with skeletal class III malocclusion and facial asymmetry. We used preoperative and postoperative CT data and photographs to measure the vertical distance of the lips when smiling. The photographs were calibrated based on these distances and the CT image. We compared preoperative and postoperative results with the t test and correlations between measurements at rest and when smiling by regression analyses. Results: There were significant correlations between the postoperative changes in canting of the mouth corners at rest, canting of the canines, canting of the first molars, the slope of the line connecting the canines, and the slope of the line connecting first molars. The magnitude of the postoperative lip line improvement while smiling was not significantly correlated with changes in the canting and slopes of the canines, molars, and lip lines at rest. Conclusions: It remains difficult to predict lip line changes while smiling compared with at rest after orthognathic surgery in patients with mandibular prognathism, accompanied by facial asymmetry.

• Journal of Astronomy and Space Sciences
• /
• 제16권1호
• /
• pp.1-10
• /
• 1999

The archival long-slit spectra, covering the wavelength range 4050 ~ 5150 $\AA$, have been used to investigate the radial behavior of absorption line fea-tures (G4300, Fe4383, Ca4455, Fe4531, and $H{\beta}$) of an elliptical galaxy NGC 5846A. The heliocentric recession velocity of NGC 5846 has been derived as $1949{\pm}87\;kms^{-1}$. Fe absorption lines of NGC 5846A show significant radial gradients with the mean slope of $\Delta/Delta(r")=-0.863\pm0.202$. There is also a significant radial gradient of G band with a slope of $-1.109{\pm}0.098$. On the other hand, no radial gradients has been detected on the Ca4455 and $H{\beta}$ absorptions of NGC 5846A. A metallicity gradient, which is derived from the Fe line gradients, is similar to the abundance gradient predicted by Larson's (1975) dissipative models for the formation of elliptical galaxies. We also note that a galaxy-galaxy interaction could affect the line gradients of NGC 5864A.