• The Journal of the Acoustical Society of Korea
• /
• v.16 no.6
• /
• pp.100-105
• /
• 1997

To analyze the multipath propagation effects on the source bearing detection of HLA(Horizontal Line Array), the conversion mechanism of the multipath into the bearing is described, and the bearing is estimated from the multipath modeled with typical sound velocity structures of the East and the South Sea of Korea. The erroneous bearing is observed from the beamforming outputs simulated with the modeled multipath, and the erroneous phenomena are analyzed. In case of the East Sea, since the multipath propagation with a high receiving angle occurs due to strong inverse slope of the sound velocity structure, it is possible that the estimated source bearing is different from the real source bearing, and that the number of the source is misrecognized.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.275-283
• /
• 2018

This study created the running water (Bandibooliwon) and lentic water (Sooryunwon) artificial habitats of Luciola lateralis in Hwadamsup, Gwangju-si, Gyunggi-do from April 2014 to February 2016. Through various habitat types, metapopulation was formed, and more sound population was induced to be maintained via interactions between habitats. We investigated coenosite at the habitat creation-target site, and 20 species in the lentic water site and 38 species in running water site were found. After releasing L. lateralis, we checked the status of settlement of L. lateralis larvae through traps and macroscopy, controlled the flow velocity of the habitats in line with the life cycle of L. lateralis (hatching, larva period, landing, pupation, copulation, and oviposition), and shaped gentle slope at water side, and planted moss. We artificially supplied melanian snails (Semisulcospira sp.), the food source, in the running water site and induced stable feeding. Also, We created artificial insectary, bred larvae stably in winter, and secured firefly population for a festival. Through night time observation, the time most suitable for a festival was confirmed to be from 20:30 to 22:00.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.143-147
• /
• 2016

Characteristics of the conventional gold (Au) surface plasmon resonance (SPR) chip, bi-metallic(Au/silver (Ag)) SPR chip, and tri-metallic(Au/Ag/Au) SPR chip were investigated and compared in the intensity measurement mode for the enhancement of SPR image sensor reactivity. Reflectance curves of the Au, bi- and tri-metallic SPR chips were acquired in phosphate-buffered saline (PBS) solution and were compared. The line width of the reflectance curve of the bi-metallic chip was the narrowest among the three different types of the chips. Also, the tangential slope of the bi-metallic chip was steeper than those of the other chips. Various concentrations of bovine serum albumin (BSA) were utilized in the SPR experiment. As a result, among the above three chips reflectance variation value of the bi-metallic chip was the largest.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.308-312
• /
• 1999

Developed the model equations which calculate roll force, roll power during hot rolling in real time. The variables which mainly effect on the roll force, roll power are shape factor, reduction, roll diameter, roll velocity, strip inlet temperature, carbon content of strip and strip-roll contact friction coefficient. Among these variables roll diameter, roll velocity, inlet temperature, carbon content and friction coefficient can be excluded in interpolated model equation by introducing equation of die force(F'), power(p') of the frictionless uniform plane strain compression which can be calculated without iteration. At the case of coulomb friction coefficient of 0.3, we evaluated coefficient of polynomial equations of {{{{ { F} over {F' } }}}}, {{{{ { Pf} over {Pd }, { Pd} over {P' } }}}} from the result of finite element analysis using interpolation. It was found that the change of values of {{{{ { F} over {F' }, { P} over {P' } }}}} with the friction coefficient tend to straight line which slope depend only on shape factor. With these properties, developed model equations could be extended to other values of coulomb friction coefficient. To verify developed roll force, roll power model equation we compared the results from these model equation with the results from these model equation with the results from finite element analysis in factory process condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.824-832
• /
• 1998

The significant additional path loss is caused by scattering, diffraction, and attenuation of propagation. Most of the wave propagation models for rural areas mainly have considered the influence of topography but ignored the effects due to land usage. The goal of this paper is development of the field strength prediction program for Cheju which is used the contour map and the effects due to land usage. In oder to classify the propagation path and divide the environment of land, data of the terrain and the land-cover are formed into a pixel. Two-ray model is transformed into equivalent model by the predicted reflection coefficient and the slope of terrain. For non line of sight, the additional loss is determined by quantitative analysis. The result show good accord and the wave propagation model program can be applied to predicted the service region in rural area of Cheju.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.402-408
• /
• 2016

In this paper, a new approach to the terminal sliding mode control using adaptive fuzzy sliding surfaces is proposed. The idea behind this approach is to utilize an adaptive sliding surface, in which the slope of the surface is updated on line using a SISO fuzzy logic inference system. We expanded the concepts of terminal sliding mode controller and proposed the terminal sliding mode control input with continuous reaching laws. The computer simulation results have shown the improved performance of the proposed control approach in terms of a decrease in the reaching and settling times and chattering free as compared to the conventional terminal sliding mode control with a fixed sliding surface. The proposed controller has also an advantage that has less computational burden to the conventional terminal sliding mode control using one-directional fuzzy rules.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.451-454
• /
• 1990

Room temperature cw operations of a standing wave and a unidirectional Ti:Sapphire laser pumped by a $Ar^+$ laser have been demonstrated in the same pumping cavity configuration. Laser emission at 790 nm was excited with all-line $Ar^+$ laser pump for both cavities. The maximum output power was found to be 600 mW in the standing wave cavity and 210 mW in the ring cavity. Values of (83 ${\pm}$ 10) % for the internal quantum efficiency and (3.0 ${\pm}$ 0.5) % for the round-trip cavity loss for standing wave cavity are obtained from the thresholds and slope efficiencies measured with 2.4 and 11.2 % optput couplers. The measured cavity-loss value at 790 nm gives a meterial figure of merit (FOM) to be 146. Unidirectional operation of the ring Ti:Sapphire laser will be discussed.

• 한국해양학회지
• /
• v.4 no.1
• /
• pp.17-35
• /
• 1969

This work concerns morphological studies of the Japaness jack mackerel, Trachurus japonicus(Temminck & Schlegel). A total of 48 random samples consisting of 2669 fish is examined, representing three geographic regions, namely, Kamakura, Nagasaki, and Tottori. Preservation affects length and weight of fish considerably, but the variability after 10 days is shown to be negligible. The variability in measuring the morphometric characters due to different measures and orders is found to be significant. They are relatively small, however, compared to the variability in mean length to be expected in samples drawn from the population. Two meristic characters, namely, anal and second dorsal fin rays and three morphometric characters, namely, head length, first and second dorsal insertion distances are chosen for the study. Results of the statistical analysis reveal that differences in the selected meristic characters among samples within and between regions are found to be significant. In general, it is reasonable to state that the jack mackerel collected in Nagasaki region, on the average, have greatest number of anal fin ray and second dorsal fin ray followed by Kamakura, and Tottori regions in that order. It is found that although no significant differences in the slope of regression line are noticed, the mean differences of the selected morphometric measurements in relation to fish length are found to be significant among samples within each region. Differences in the regression coefficients as well as the adjusted sample means are found to be significant between regions. The analysis suggests that samples from Nagasaki region, on the average, have longest head length and greatest distances from snout to the insertion of first dorsal and second dorsal fins followed by Kamakura, and Tottori regions in that order.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.823-830
• /
• 2008

We present a high-accuracy digital-to-analog (DA) actuator using a load spring, specially designed to compensate the output displacement errors caused by fabrication errors. The compensated linear DA actuator is capable to change the slope of input-output modulation line in order to compensate fabrication errors. We design, fabricate, and characterize three different prototypes: one uncompensated design and two compensated designs respectively for a specific value and for a given range of fabrication error. The compensated linear DA actuators show the output displacement errors of $-0.20{\pm}0.23{\mu}m\;and\;-0.13{\pm}0.18{\mu}m$, respectively, reduced by 64.3% and 76.8% of the output displacement error, $0.56{\pm}0.20{\mu}m$, produced by the conventional uncompensated linear DA actuator. We experimentally verify the fabrication error compensation capability of the present compensated linear DA actuators, thus demonstrating high-accuracy actuation performance immune to fabrication errors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.42-49
• /
• 2005

A new blockage correction method has been developed for the wall interference correction of closed test-section subsonic wind tunnels based on the nonlinear relationship between separation blockage and separation drag. This method can be applied continuously from the linear lift-slope region to the highly nonlinear post-stall region by on-line processing. The present method was validated by comparing the results with a classical method based on the test results of a bluff body and a measured-boundary-condition method. It was shown that the present method is in good agreement with the measured-boundary-condition method, enabling better wall corrections than the bluff body method in both near-stall and post-stall regions.