• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.786-791
• /
• 2000

The purpose of this study is to investigate quantitatively the effects of drawbead dimensions to the weld line movements for the deep drawing of the tailor welded blanks. Square blanks have been used and five different circular drawbeads were installed in experimental apparatus. The differences in the weld-line movements and the tendencies of the strain distributions in thickness were investigated by experimental and analytical methods. The results of the weldline movement show that the smaller the radius of drawbead installed, the larger the values of movements. Also it is shown for thickness strain in central and diagonal direction that the larger the dimension of drawbead, the larger the values of maximum thickness strain. The drawbead adds the additional restraining forces to the blank, hence the movement of weld line could be controlled by the adequate drawbead installation

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.121-130
• /
• 1998

In order to analyze the forming characteristics of laser welded tailored blanks, laser welded blanks of different thickness and strength combinations were prepared and tensile, stretching, stretch flanging and deep drawing tests were done. The tensile elongation perpendicular to the weld line, stretching and stretch flanging formability decreased with increasing the deformation restraining force (strength ${\times}$ thickness) ratio between two welded sheets. The tensile elongation along weld line reached a value above 90% of the single sheet's elongation. Stretch flanging formability was reduced to approximately 10% of the single sheet value when the deformation restraining force ratio between two welded sheets was increased to two. Weld line movement of deep drawing test specimens was also affected by the strength ratio of the combined sheets, the weld line location and forming conditions. In all forming modes of tailored blanks, excessive weld line movement resulted from strain concentrations at the weaker sheet and resulted in fracture of the weaker side.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.146-151
• /
• 2009

현대 설치 예술 분야에서 피지컬 컴퓨팅(physical computing)을 이용한 작품의 사례가 많아지고 있다. 하지만 인터랙션(interaction)을 위한 로봇 사용이 아닌 인터페이스(interface)가 장착된 드로잉(drawing)의 도구로 로봇을 사용하여 작업한 예는 쉽게 찾아 볼 수가 없다. 본 논문에서는 사용자와 통신할 수 있는 드로잉 작업용 시스템 설계와 개발 과정에 대해 언급하고자 한다. 작업 환경을 구성하는 로봇으로는 레고(Lego) 사(社)에서 나온 마인드스톰(Mindstorm) 지능형 로봇 NXT 시스템을 이용하였고, 현실에서의 실제 드로잉 환경과 이를 예측하여 운동을 시뮬레이트(simulate)하는 가상 환경으로 구분하였다. 실제 환경에서 드로잉을 하기 위하여 NXT 시스템을 제어할 수 있도록 하는 아이커맨드(Icommand) 라이브러리(library)를 이용하였고, 가상 환경을 표현하기 위하여 이미지 표현이 쉬운 프로세싱(processing) 라이브러리를 이용하였다. 라인(line) 드로잉을 위하여 벡터(vector) 방식 SVG(Scalable Vector Graphics) 파일을 기반으로 이미지 정보를 얻어 표현하였다. 이 시스템은 블루투스(bluetooth) 연동으로 실시간 통신이 가능하여 사용자의 요구에 따라 원하는 이미지를 만들어 낼 수 있다. 이러한 모습은 이미지의 결과에 그치는 것이 아니라 드로잉을 하는 과정에서 하나의 퍼포먼스(performance)로 작용할 수가 있다.

• 패션비즈니스
• /
• 제1권1호
• /
• pp.84-98
• /
• 1997

This study is to develop a fashion drawing education program which is based on the theory of 'Split-brain' by Roger W. Sperry and 'Drawing on the Right Side of the Brain' by Betty Edwards. Students in Fashion Design start their training by developing a foundation in drawing and studing the tools, materials and methods of the Industry. Ideas are then developed on paper, later translated into three-dimensional shapes and finally into finished garments. Fashion drawing and design techniques train the hand and eye to all the nuances of fashion design and illustration. Fashion drawing course deals with the sketching of fashion models for the purpose of understanding the model figure, basic anatomy, movement and figure attitudes. Having mastered the basic skills, students take advanced drawing course which is developing awareness of design, needs, of fashion market' using various media for the purpose of developing a designer's sketch, with emphasis on the drawing and designs. Featured aspects of this study include the following; 1. Drawing the negative space; basic visual concepts 2. Contour drawing; constructs, visual measurement, movement 3. Model drawing; the classical method, proportion, symmetry. The primary aim of this study is to develop a sensitive, animated line based on observed form. It is important to let the students Imagine that they are actually touching the model, for in this way they can benefit from simulating the child's learning process. Instead of actually touching the model they are using their eyes as an extension of their sense of touch.

• 한국측량학회지
• /
• 제27권1호
• /
• pp.657-666
• /
• 2009

GIS 분야에서 다양하고 복잡한 원시 선형데이터로부터 수치지도 형태의 건물데이터를 형성하기 위한 일반화 기법 중 선형 단순화기 법에 대한 연구가 활발하게 진행되고 있으나 국내의 수치지도 작성내규를 고려한 단순화기 법은 연구사례가 많지 않다. 본 연구에서는 건물 준공 시 이용되는 CAD 도면자료로부터 건물 외곽선을 추출하여 수치지도 건물데이터를 생성 또는 갱신하기 위해 방법론으로 수치지도 작성내규에 근거한 선형단순화 기법을 제안하였다. 제안된 기법의 효용성을 검증하기 위하여 Douglas-Peucker 알고리듬 등 가장 효율적이고 일반적으로 사용되는 4개의 선형 단순화기법과 본 기법을 동일한 건물 외곽선에 적용하여 수치지도 작성내규 만족도 형상유사도 절점수, 선길이, 면적에 대해 비교, 분석하였다. 분석 결과, 제안된 알고리듬의 경우 수치지도 내규 만족도 면에서 100%에 가까운 만족도를 보였으며 형상유사도, 절점수, 선길이, 면적의 측면에서도 다른 알고리듬들에 비해 거의 손실이 발생하지 않아 추후 건설도면을 이용한 수치지도의 갱신 시에 유용하게 사용될 것으로 판단된다.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.23-29
• /
• 2012

A single line diagram is a graphic user interface to represent electrical connectivity between power equipments in distribution automation systems. This paper proposes a new single line auto-drawing technique based on the service oriented architecture. Web service, CIM(Common Information Model) and SVG(Scalable Vector Graphics) are adopted to implement SOA concept. A web service demo system was established which is configured with the service provider, consumer and broker to verify the feasibility of this study.

• 폴리머
• /
• 제31권3호
• /
• pp.228-232
• /
• 2007

본 연구에서는 의료용 흡수성 재료 및 환경적합성 재료의 개발을 목적으로 생체흡수성의 poly(glycolic acid)(PGA)를 심선(芯線)에 제작하고, 환경분해성의 poly(butylene succinate-co-L-lactate)(PBSL) 및 poly [(R)-3-hydroxybutylate] (PHB)를 외층(外層)에 지닌 복합섬유를 제작하여, PGA의 가수분해에 의해 발생되는 glycolic acid에 의한 PBSL 및 PHB의 가수분해성의 향상을 도모하고자 하였다. 그 결과 PBSL/PGA 복합섬유에 대한 연신은 $65^{\circ}C$에서 실시함에 의해 결정배향이 잘 배열된 섬유를 얻었다. 그러나 PHB/PGA 복합섬유는 $50^{\circ}C$에서는 결정배향이 양호한 섬유를 얻을 수 없었기 때문에 $50^{\circ}C$ 이상의 온도에서 연신을 실시해야 양호한 복합섬유를 얻을 수 있음을 알았다. 또한 in-line 연신에서는 섬유표면에 요철이 발생되기 때문에 on-line 연신을 실시하는 것이 매끄러운 표면을 얻을 수 있음을 알았다.

• 소성∙가공
• /
• 제15권6호
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• Journal of applied mathematics & informatics
• /
• 제28권5_6호
• /
• pp.1347-1358
• /
• 2010

An upright drawing of a planar graph G on k layers is a planar straight-line drawing of G, where the vertices of G are placed on a set of k horizontal lines, called layers and no two adjacent vertices are placed on the same layer. There is a previously known algorithm that decides in linear time whether a planar graph admits an upright drawing on k layers for a fixed value of k. However, the constant factor in the running time of the algorithm increases exponentially with k and makes it impractical even for k = 3. In this paper, we give a linear-time algorithm to examine whether a biconnected planar graph G admits an upright drawing on three layers and to obtain such a drawing if it exists. We also give a necessary and sufficient condition for a tree to have an upright drawing on three layers. Our algorithms in both the cases are much simpler and easier to implement than the previously known algorithms.

• 복식문화연구
• /
• 제12권1호
• /
• pp.28-40
• /
• 2004

The purpose of this study was (1) to identify the experimental bias which could appear person perception as results of development methods (2) to find out the most desirable method in developments of stimulus. The research was a quasi experiment and the subjects were 358 male and female undergraduate students by convenient sampling. The experimental instruments consisted of a set of stimulus and semantic differential scales of 7-point bi-polar adjectives. The collected data were analyzed by Principle Component Analysis, ANOVA(analysis of variance), Scheffe's multiple range test. The independent variables were developing methods of stimulus(live person, photography of real person, 2 kinds of black and white line drawing, 2 kinds of color drawing). The results were as follows. First, five factors which were potency, sociality, appearance, evaluation, activity impressional dimensions emerged to account for the methods of development of stimulus. Second, the methods of development of stimulus had significant effects on potency, sociality, appearance, activity factors. In sociality factors, the impression of photographic stimulus was the closest to the live person's impression. However in the appearance and activity impressions, significant difference existed between live person and other developing stimulus. In the potency impression, black and white line-drawing gave the highest impressional bias. In the sociability and appearance impressions, color-drawing stimulus gave the highest impressional bias. Result: On conclusion the developments of stimulus can effect on stimulus person's impressions and these effects can produce experimental biases, the photographic stimulus gave the least impressional bias. The study shows that photography of real person will produce minimize measurement error.