외부복사 열원(20, 25, 35, 50, $70kW/m^2$)과 산소/질소의 혼합가스의 농도 변화에 따른 페놀폼의 연소 특성을 분석하였다. 산소지수는 KS M ISO 4589-2를 만족하는 산소지수시험기를 사용하였으며, 점화시간, 임계열속, 그리고 질량감소속도는 ISO 5660-1를 만족하는 mass loss calorimeter를 사용하여 측정하였다. 연구결과, 외부 복사열원에서 임계열유속은 $28.99kW/m^2$, 평균질량감소속도는 $0.56{\sim}1.77g/m^2s$로 측정되었으며, 한계산소지수는 45.1%를 나타내었다. 모든 연구결과를 종합한 결과 페놀 폼이 다른 발포 물질에 비해 아주 우수한 화재안정성을 나타낸다는 것을 알 수 있었다.
본 연구에서는 지하공동구 및 트레이에 설치된 케이블의 화재시 화염전파를 막기 위해 사용되고 있는 수성 및 유성계 난연도료의 도포 두께별 연소특성을 파악하기 위해 연기밀도(ASTM E 662)와 산소지수 (ASTM D 2863) 시험법을 이용하여 실험을 수행하였다. 본 연구 결과, 난연도료의 연소특성은 다음과 같다. (a) 난연도료의 최적 두께는 수성계의 경우 1.5∼2mm, 유성계의 경우 0.2mm 것으로 나타났다. (b) 연기밀도는 Non-flaming방식보다 Flaming방식에서 더 높게 나타났다. (c) 연기밀도와 산소지수를 측정한 결과 수성계 난연도료가 유성계 난연도료 보다 연소특성이 우수한 것으로 나타났다. (d)수성 및 유성계 난연도료의 산소지수가 규격(30이상)에 만족함을 알 수 있었다.
According to ISO 4589-2:2001, we studied on the fire characteristics of some gangway materials used as the interior materials of the railroad vehicles. Currently materials of the gangway used in the railroad vehicles tend to alternate PVC coated fabric mostly used in former days with synthetic rubber or silicone. Accordingly, we compared Limited Oxygen Index on them in this study. And we found that the test results of the synthetic rubber or silicone gangway are better than those of the PVC coated fabric gangway largely.
The objective of this work is to evaluate the hypothesis that a good technique for supplying oxygen to the saturated zone in the presence of light nonaqueous phase liquid (LNAPL) pool contamination at the water table is to pass air through the unsaturated zone above the pool. This hypothesis was evaluated in experimental studies performed using a bench-scale, sand-tank reactor, Steady-state abiotic experiments in the sand-tank reactor with air flowing through the reactor headspace demonstrated that oxygen supply through the water table interface into the saturated zone was enhanced when an LNAPL (dodecane) pool was present at the water table. These experimental results confirmed the hypothesis that an LNAPL pool can serve as a high concentration oxygen source to the oxygen-limited area beneath the pool and, as a result, enhance the in situ biodegradation rate.
본 연구에서는 페놀 폼의 난연성을 증가시키기 위하여 널리 사용되고 있는 인계 난연제의 첨가에 따른 페놀 폼과 폴리우레탄 폼의 난연 성능을 비교 평가하였다. 난연제가 첨가된 페놀 폼과 폴리우레탄 폼을 각각 열분석(TGA)을 통하여 열분해 거동을 알아보았고 Cone calorimeter를 이용하여 열방출량(HRR), 연기발생량(TSR) 및 CO 및 $CO_2$ 발생량과 산소한계지수(Limited oxygen index, LOI)를 통하여 난연성능을 평가하였다. 실험 결과 페놀폼이 폴리우레탄 폼에 비해 초기 분해는 빠르지만 $800^{\circ}C$에서 잔존량이 월등히 많았으며 낮은 열방출속도 값을 나타내었다. 또한 질량 감소율, 연기발생량도 폴리우레탄 폼보다 낮아 우수한 난연성능을 가지는 것을 알 수 있다.
In this experiment, blends of ethylene vinyl acetate rubber (EVM) with a vinyl acetate (VA) content greater than 40 wt% and ethylene propylene rubber (EPM) were prepared by mechanical mixing; a number of parameters of the blends, including oil resistance, morphological and dynamic mechanical properties and flame retardancy, were subsequently measured. In the $100^{\circ}C$ oil resistance test, both the ammonium polyphosphate/dipentaerythritol/expandable graphite (APP/DPER/EG) and aluminum hydroxide (ATH) flame retardant systems showed an increase in volume change with increasing EPM content. For the ATH system, the dispersion shape was coarse and aggregation was observed. The results of a dynamic mechanical test showed slightly higher E' and E'' for the APP/DPER/EG flame retardant system when compared to the single ATH system. For both the APP/DPER/EG and ATH systems, the limited oxygen index (LOI) tests performed at increasing content of EPM showed a LOI value higher than 30, indicating excellent flame resistance.
본 연구에서는 범용 열가소성 수지인 폴리프로필렌 (virgin polypropylene, VPP)과 폴리프로필렌을 주성분으로 하는 재생플라스틱의 난연성을 향상시키기 위하여, 난연제 decabromodiphenyl oxide (DBDPO)와 chlorinated paraffin wax (CPW)를 혼합하여 이것들의 난연 특성을 정량적으로 비교 분석 연구하였다. 난연성 평가 측정으로 콘 칼로리미터 (cone calorimeter, ASTM E1354, ISO 5660), 한계산소지수 측정 (LOI, ASTM D2863, ISO 4589) 등을 사용하였고, 콘 칼로리미터를 이용하여 DBDPO와 CPW의 난연효율을 정량적으로 측정하였다. 콘 칼로리미터의 결과로 난연제의 난연효율을 측정한 결과, DBDPO가 CPW보다는 약 2배의 난연효율을 가지고 있다는 것을 확인하였고, 한계산소지수 측정 결과와 유사한 난연효율을 보임을 확인하였다. 열중량 분석 (TGA) 측정결과 난연제 DBDPO를 첨가하였을 때 약 30~5$0^{\circ}C$의 열분해 온도의 상승을 확인할 수 있었다.
본 연구에서는 새로운 비할로겐-인계 난연제를 포함하는 경질 폴리우레탄 폼[BHP-RPUF]과 할로겐-인계 난연제를 포함하는 경질 폴리우레탄 폼[TCPP-RPUF] 그리고 난연제를 포함하고 있지 않은 폴리우레탄 폼[Pure-RPUF]의 기계적 물성 및 난연 특성에 대해 비교 분석하였다. 새로운 비할로겐-인계 난연제인 bis(3-(3-hydroxypropoxy)propyl) phenyl phosphate [BHP]는 disodium phenyl phosphate와 3-chloro-1-propanol의 반응을 통해 합성하였다. BHP-RPUF, TCPP-RPUF, 그리고 Pure-RPUF의 압축강도는 BHP-RPUF와 TCPP-RPUF가 비슷한 압축강도를 나타내었고, 열전도도에서는 BHP-RPUF가 TCPP-RPUF보다 낮은 값인 $0.023W/m{\cdot}K$를 갖는 것을 확인하였다. 반응속도와 SEM을 통해 기공의 크기를 측정하여 열전도도에 미치는 영향에 대하여 분석하였고, TGA 분석을 통해 내열성을 확인하였다. 난연성은 한계산소지수(Limited Oxygen Index) 측정 실험을 통하여, Pure-RPUF보다 BHP-RPUF에서 난연성이 향상됨을 확인하였다.
본 연구는 에폭시의 난연 특성을 향상시키기 위하여 친환경, 저가, 고종횡비(high aspect ratio)를 갖는 무기계 난연첨가재인 일라이트를 사용하였고, 친수성 일라이트의 소수성 에폭시 내 분산 문제점을 개선하기 위하여 불소화 반응을 이용하여 인의 소수화 개질을 실시하였다. 일라이트의 불소화 개질에 의하여 경화 전 에폭시 용액 내에서 일라이트의 분산성 및 경화 후 형성된 복합체 내에서의 일라이트 분산성도 향상되었다. 이러한 분산성의 향상은 일라이트 불소화 개질로 인하여 소수화된 일라이트의 에폭시 용액에 대한 친화성 향상과 복합체 형성 시 에폭시 고분자의 일라이트 층간 삽입 혹은 에폭시에 의한 일라이트의 박리현상 등에 의하여 나타난 현상으로 판단된다. 따라서, 한계 산소 지수(limited oxygen index, LOI)는 일라이트의 불소화 영향으로 에폭시만의 값에 비해 약 24% 정도 증가한 것으로 보아 불소화 일라이트/에폭시 복합제의 제조로 에폭시의 난연 특성을 향상시킬 수 있음을 알 수 있었다.
열가소성 수지인 폴리프로필렌 (PP)과 무기나노입자인 몬모릴로나이트 (MMT)의 나노복합재료에 할로젠 계열의 난연제 데카브로모다이페닐옥사이드 (DBDPO)와 클로로파라핀 왁스 (CPW)를 철가하였을 때의 난연특성 향상에 대해 실험하였다. 고분자 수지의 난연특성은 난연제의 첨가뿐만 아니라 나노복합화를 통해서도 향상될 수 있는데, 콘 칼로리미터와 한계산소지수 (LOI)의 측정을 통하여 난연제와 무기나노입자의 함량에 따른 폴리프로필렌/몬모릴로나이트 나노복합재료의 난연특성을 정량적으로 측정하였다. 폴리프로필렌에 난연제 DBDPO와 CPW를 첨가하였을 때, 난연특성이 2배 이상 향상되는 것을 관찰하였으며, CPW가 DBDPO보다 약간 우수한 난연특성을 보였다. 한계산소지수 측정결과 폴리프로필렌에 난연제를 첨가하면 폴리프로필렌의 연소특성이 가연성 영역 (LOI<19)에서 난연성 영역 (LOI>20)으로 전이됨을 확인하였다. 특히, 폴리프로필렌에 몬모릴로나이트를 첨가하여 나노복합화를 하였을 때의 난연특성이 3배 이상 향상되었는데, 이로부터 난연제를 단순히 혼합하는 것보다 몬모릴로나이트를 나노복합화한 후 난연제를 첨가하는 것이 난연특성의 향상에 휠씬 유리하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.