• Journal of Powder Materials
• /
• v.1 no.1
• /
• pp.15-20
• /
• 1994

The effect of SiC addition on sintering behaviors and microstructures of TiB2 ceramics were studied. The sintering of TiB2 was limited due to the surface diffusion and rapid grain growth at high temperature. However the addition of SiC to TiB2 ceramics improved the densification to above 99% of the theoretical density. The sintering of TiB2-SiC composite starts at 120$0^{\circ}C$ with the melting of the oxides in particle surface as impurities. After the reduction of the oxide by additional cabon at above 140$0^{\circ}C$, the grain boundary diffusion through the interface of TiB2-SiC play an important role. TEM observation showed neither chemical reactions nor other phases formed at the TiB2-SiC interfaces but the microcracks were observed due to the mismatch of thermal expansion between TiB2-SiC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.489-489
• /
• 2000

Recently, Reinforcement Learning(RL) methods have been used far teaming problems in Partially Observable Markov Decision Process(POMDP) environments. Conventional RL-methods, however, have limited applicability to POMDP To overcome the partial observability, several algorithms were proposed [5], [7]. The aim of this paper is to extend our previous algorithm for POMDP, called Labeling Q-learning(LQ-learning), which reinforces incomplete information of perception with labeling. Namely, in the LQ-learning, the agent percepts the current states by pair of observation and its label, and the agent can distinguish states, which look as same, more exactly. Labeling is carried out by a hash-like function, which we call Labeling Function(LF). Numerous labeling functions can be considered, but in this paper, we will introduce several labeling functions based on only 2 or 3 immediate past sequential observations. We introduce the basic idea of LQ-learning briefly, apply it to maze problems, simple POMDP environments, and show its availability with empirical results, look better than conventional RL algorithms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.129-129
• /
• 1998

Most of the surface/interface analysis tools have limited depth profiling c capability in terms of the profiling range and the depth resolution. However, M MEIS can profile the surface and subsurface composition and structure q quantitatively and non-destructively with atomic layer depth resolution. I In this presentation, the MEIS system developed at KRISS will be briefly d described with an introduction on the principle of MEIS. Recent MEIS r results on the surface and interface composition and structural change due to i ion bombardment will be presented for preferential sputtering of T:없Os and d damage depth profiles of SHooD, Pt(l11), and Cu(l1D due to Ar+ ion b bombardment. Direct observation of strained Si lattices and its distribution i in the SHool)-SiCh interface and the initial stage of Co growth on Pt(l11) w will be reported. H surfactant effects on epitaxial growth of Ge on Si(ooD w will be discussed with STM results from SND.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.35-41
• /
• 2009

We present a method to improve the RV (radial velocity) measurements accuracy by using telluric lines. Telluric lines are used to estimate the wavelength scale drift over the detector of the spectrograph. In the case of BOES, the Echelle spectrograph at BOAO (Bohyunsan Optical Astronomical Observatory), the wavelength scale drift can be several hundreds m/s over 24 hours. Due to the wavelength scale drift, the RV measurements accuracy of BOES is limited to several hundreds m/s. By estimating the wavelength scale drift by telluric lines, we can remove its effect to improve the RV measurements accuracy to about 40 m/s.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.10 no.1
• /
• pp.349-356
• /
• 1997

an acute, unilateral, self-limited inflammatory disease of cerebral ganglia and the ganglia of posterior nerve roots and peripheral nerves in a segmented distribution, caused by the chickenpox virus, and characterized by groups of small vesicles in the cutaneous areas along the course of affected nerves, and associated with neuralgic pain. three case of herpes zoster has severe post herpetic neuralgia. these patients has been treated with westernmedicine. But they could not expect to improve condition. We exprienced three cases of herpes zoster that have a result of effect with oriental treatment and lazer threaphy.

• The Journal of Korean Medicine
• /
• v.20 no.4
• /
• pp.106-114
• /
• 2000

The herpes zoster infecting ophthalmic branch of trigeminal Nerve that is similar to migraine at first stage symptom has been treated with oriental medication at Dept. of Internal Medicine, Semyung University Oriental Hospital. The fIrst symptom of roster is burning pain, tingling or extreme sensitivity in one area of the skin, usually limited to one side of the body. This may be present for one to three days before a red rash appears at that site. There may also be a fever or headache. The rash soon turns into groups of blisters. The blisters start out clear but then pus or dark blood collects in the blisters before they crust over (scab) and begin to disappear. The pain may last longer. In this case, the severe pain was present for five days, the blisters and scabsdisappeared entirely on the seventeenth day, but postherpetic neuralgia, the most common complication and is observed most frequently in the ophthalmic branch of trigeminal nerve, was not prevented entirely. We have observed this case and report to help treatment on this disease at oriental medicine clinic.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.555-560
• /
• 2006

A PIN photodiode having a low dark current of 1.35 nA and a high external quantum efficiency of 95.3% fabricated for a passive optical network receiver. As the current was increased under a high voltage of 38 V and a temperature of $190^{\circ}C$, it was observed that there is a threshold current at 11 mA which induces a junction failure. Experimental data suggest that the junction failure occurs due to the crystal breaking at the end facet as a result of thermal heat or energetic carriers. This threshold behavior of junction failure is a valuable observation for the safe treatment of photodiodes. As long as the current is limited below the threshold currents, we have not observed failure events of our photodiodes.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.377-384
• /
• 2011

Cooperative beamforming has previously been proven to be an efficient way to improve the cooperative diversity. This method generally requires all relay nodes to participate in beamforming, which can be seen as "all participate" cooperative beamforming. However, not all relay nodes have constructive impacts on the end-to-end bit error rate (BER) performance. Based on this observation, we propose a new cooperative scheme which only selects those "appropriate" relay nodes to perform cooperative beamforming. Such relay nodes can be simply determined with mean channel gains. Therefore, the selection complexity is significantly reduced as global instantaneous channel state information is not required. This scheme guarantees that energy is only allocated to the "appropriate" relay nodes, and hence provides superior diversity. We also prove that power allocation among source and selected relay nodes is a convex problem, and can be resolved with lower computational complexity. Simulation results demonstrate that our scheme achieves an essential improvement in terms of BER performance for both optimal and limited feedback scenarios, as well as high energy-efficiency for the energy-constrained networks.

• Communications of the Korean Mathematical Society
• /
• v.16 no.3
• /
• pp.459-485
• /
• 2001

The aim of EIT (electrical impedance tomography) system is to image cross-section conductivity distribution of a human body by means of both generating and sensing electrodes attached on to the surface of the body, where currents are injected and voltages are measured. EIT has been suffered from the severe ill-posedness which is caused by the inherent low sensitivity of boundary measurements to any changes of internal tissue conductivity values. With a limited set of current-to-voltage data, figuring out full structure of the conductivity distribution could be extremely difficult at present time, so it could be worthwhile to extract some necessary partial information of the internal conductivity. We try to extract some key patterns of current-to-voltage data that furnish some core information on the conductivity distribution such s location and size. This overview provides our recent observation on the location search and the size estimation.

• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.243-253
• /
• 2009

For the last 14 years, space-borne satellite SAR system such as RADARSAT-1, ERS-2, and ENVISAT ASAR have provided a continuous observation over the ocean. However, the data acquired from those systems were limited to C-band frequency until the advent of the first spacebome German X-band SAR system TerraSAR-X in 2007. Korea is also planning to launch the nation's first X-band SAR satellite (KOMPSAT-5) in 2010. It is timely and necessary to develop X-band models for estimating geophysical parameters from these X-band SAR systems. In this study, X-band wind retrieval model was investigated and developed based on numerical ocean scattering model (radar backscattering model and hydrodynamic interaction model). Although these models have not yet been tested and validated for broad ranges of wind conditions, the estimated wind speeds from TerraSAR-X data show generally good agreement with in-situ measurements.